Latest Nova CY (13°E, Irdeto 2, ID 0001) *** Chat Only Here ***

ceyar said:

DreamBox 800-500S did not work in

Click to expand...

Use PC/fausto emulator as server and dreambox as client... :thum:

Other channels are working too for me now. Is this supposed to work ?

kiliantv said:

with this key works fine here.

Click to expand...

I see you've got it working on the Dreambox. I tried to use CCcam as a client with these N-line in the CCcam.cfg

N: 192.168.1.4 18000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.1.4 18001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14

On FAUSTO 1.43 I've installed the FaustoServers.cfg like this:

N: 192.168.1.4 18000 0102030405060708091011121314 {0622/000000}
N: 192.168.1.4 18001 0102030405060708091011121314 {0604/000000}
U: dummy dummy

I've got connection on my CCcam to the server and Canaldigitaal NL is working fine, but no Nova seen yet. What could be wrong ?

Greetz,
Marciemarc

try in Faustoservers.cfg with

N: 192.168.1.4 18001 0102030405060708091011121314 {0604/000001}

then CY should work

I've found the solution:

In the FaustoServer.cfg I had to use the following line:

N: 192.168.1.4 18001 0102030405060708091011121314 {0604/000000 000001 000002 000003}

This dit the trick.

No season needed, just a PC & my CCcam on the Dreambox.

Greetz,
Marciemarc

Can some explain how I use fausto emulator I just downloaded it and would like to watch on my DM500.

Install Fausto 1.43 on your PC.
Go into the map /EMU/Cardserver

Make a file called: FaustoServers.cfg with notepad:


The IP is the ip-adress from the PC (server).

On your Dreambox, edit the CCcam.cfg and add this line:


Now start Fausto end choose Tools, Emulator.
On the tab "Monitor", load your KEY.BIN file.
On the tab "Server", tab "Manager" press LOAD and then START

Check your connection in the CCcam webinterface, you should get picture on Nova CY channels.

Greetz,
Marciemarc

I'm using a dreambox, I've installed fausto 1.43 and created file FaustoServers.cfg Does the ip address need changing to the dreambox ip address or do I use 192.168.1.4 What do I do next? I've looked in fausto and can't see /EMU/Cardserver as I'm a newbie to fausto could somebody explain exactly what to do. Thanks for any help

hello
if I understand correctly, NOVA is working on Diablo 2 and some Fausto software on PC, but still not working in EMU or TREX?

thanks

@ kgial, why don't you try it? You don't believe me? It works fine, really.

@ finestrat: You have to put the file FaustoServers.cfg on your pc in the map where you installed Fausto, then goto /EMU/Cardeservers/
First find out what the IP addres of your PC is. This is the IP address which you have to use in the FaustoServers.cfg and also in the CCcam.cfg. My PC has IP : 192.168.1.4 but of course yours can be different.
When you start Fausto, goto Tools and click on Emulator. Then on the tab "Monitor", load your KEY.BIN file.
On the tab "Server", tab "Manager" press LOAD and then START

Nova

Hallo,
can somebody give me a PN how I get this in the EMU of my ARGUS VIP or Argus Classic?
Thank you in advance
Dieter Weckerle

hi

nova cy emu works only

fausto emulator season interface, other serial connection etc & fausto cardshring [09/04/10]

Diablo Light v2 3.9 & Ipnosys11 [10/04/10]

vplug 243 and new irdeto mdl /for dvb pc sat card [10/04/10]

marciemarc said:

Install Fausto 1.43 on your PC.
Go into the map /EMU/Cardserver

Make a file called: FaustoServers.cfg with notepad:

Code:

N: 192.168.1.4 18001 0102030405060708091011121314 {0604/000001}
U: dummy dummy

The IP is the ip-adress from the PC (server).

On your Dreambox, edit the CCcam.cfg and add this line:

Code:

N: 192.168.1.4 18001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Now start Fausto end choose Tools, Emulator.
On the tab "Monitor", load your KEY.BIN file.
On the tab "Server", tab "Manager" press LOAD and then START

Check your connection in the CCcam webinterface, you should get picture on Nova CY channels.

Greetz,
Marciemarc

Click to expand...

well its doesnt work in my PC/Dreambox

I did everythink like you wrote, after start its show me in MANAGER - running and in process:
Processes:> [11.4.2010 14:41:06] Server Newcamd 10.0.0.5:6001 {0622/000000} running
Processes:> [11.4.2010 14:41:06] Server Newcamd 10.0.0.5:6002 {0604/000001} running
Processes:> [11.4.2010 14:41:06] Server(s) Loaded 2

my PC is 10.0.0.5

but in LOGS is nothing, so I think there is no communication
In Dreambox us CCcam 2.1.4

I tested the conection between PC and dreamboy by Dreamboxedit and DCC soft and its was connected , so It seems like just fausto doesnt communicated

thanks for help


PS: FaustoServers.cfg ->
N: 10.0.0.5 6001 0102030405060708091011121314 {0622/000000}
U: dummy dummy
N: 10.0.0.5 6002 0102030405060708091011121314 {0604/000001}
U: dummy2 dummy2

I cant edit my previous info so:

I fix the problem it was my mistake with correct IP adress in dream (I miss one dot)

but I have another problem, NOVA is freezing every 10seconds, but with the same package the C+NL working without any problem

When Iam looking on some program on NOVA CY and I take a look into fausto there are a message
Processes:> [11.4.2010 16:50:20] [10.0.0.5:18001] Connection closed for 10.0.0.6 on socket 2075
Processes:> [11.4.2010 16:50:20] [10.0.0.5:18001] New connection from 10.0.0.6 on socket 2076
Processes:> [11.4.2010 16:50:20] [10.0.0.5:18001] -> [10.0.0.6] [dummy2:dummy2] Connection Accepted
Processes:> [11.4.2010 16:50:31] [10.0.0.5:18001] Connection closed for 10.0.0.6 on socket 2076
Processes:> [11.4.2010 16:50:31] [10.0.0.5:18001] New connection from 10.0.0.6 on socket 2077
Processes:> [11.4.2010 16:50:31] [10.0.0.5:18001] -> [10.0.0.6] [dummy2:dummy2] Connection Accepted
Processes:> [11.4.2010 16:52:47] [10.0.0.5:18001] Connection closed for 10.0.0.6 on socket 2077
Processes:> [11.4.2010 16:52:47] [10.0.0.5:18001] New connection from 10.0.0.6 on socket 2078
Processes:> [11.4.2010 16:52:47] [10.0.0.5:18001] -> [10.0.0.6] [dummy2:dummy2] Connection Accepted
Processes:> [11.4.2010 16:52:53] [10.0.0.5:18001] Connection closed for 10.0.0.6 on socket 2078
Processes:> [11.4.2010 16:52:53] [10.0.0.5:18001] New connection from 10.0.0.6 on socket 2079
Processes:> [11.4.2010 16:52:53] [10.0.0.5:18001] -> [10.0.0.6] [dummy2:dummy2] Connection Accepted
Processes:> [11.4.2010 16:52:59] [10.0.0.5:18001] Connection closed for 10.0.0.6 on socket 2079
Processes:> [11.4.2010 16:52:59] [10.0.0.5:18001] New connection from 10.0.0.6 on socket 2080
Processes:> [11.4.2010 16:52:59] [10.0.0.5:18001] -> [10.0.0.6] [dummy2:dummy2] Connection Accepted


anybody know what is the problem? thank you

I had some freezes as well when I used CCcam2.1.3. After I upgraded the box to CCcam2.1.4 freezes were a whole lot less, on most channels none at all !
Greetz,
Marciemarc

i used newcamd for client works without any freezes so that fixed for me the problem on a DBOX2

Fausto Servers Config: FaustoServers.Cfg

N: 192.168.178.31 12000 0102030405060708091011121314 {0604/000000 000001 000002 000003}
N: 192.168.178.31 12001 0102030405060708091011121314 {0622/000000 000001 000002 000003}
N: 192.168.178.31 12002 0102030405060708091011121314 {090F/000000 000001 000002 000003}}
N: 192.168.178.31 12003 0102030405060708091011121314 {0100/000030}
U: dummy dummy
U: dummy2 dummy2
U: dummy3 dummy3
U: dummy4 dummy4

Click to expand...

Newcamd on DBOX newcamd.conf
# /var/tuxbox/config/newcamd/newcamd.conf
CWS = 192.168.178.31 12000 dummy dummy 0102030405060708091011121314 {0604/000000 000001}
CWS = 192.168.178.31 12001 dummy2 dummy2 0102030405060708091011121314 {0622/000000 000001}
CWS = 192.168.178.31 12002 dummy3 dummy3 0102030405060708091011121314 {090F/000000 000001 000002 000003}
CWS = 192.168.178.31 12003 dummy4 dummy4 0102030405060708091011121314 {0100/000030}

Click to expand...

Nova CY works with emu on my receiver Infinity 7000 (FTE clone, Ali C chip).

all down

Whats Down?

Nova CY is ok here. :thum: