mugello186
Registered
- Messages
- 3
Hi all.I am expecting delivery next week of a viark sat 4k receiver.Does anyone have a motorised channel list for this box or is there any way to convert an e2 .xml list to .sdx.Thanks in advance.
Why not just blind scan every satellite that you can receive?
That's what I do. I use my VU Ultimo to do the dish movement.
Why not just blind scan every satellite that you can receive?
That's what I do. I use my VU Ultimo to do the dish movement.
https://www.mediafire.com/file/981qq3pl5zf3owe/SAT4Ksolom+sportxx.rar/file
[url]https://www.mediafire.com/file/zgc85r8h3z6c53m/SAT4Ksoloastra.rar/file[/url]
https://www.mediafire.com/file/71bhdj27du7rnr4/SAT4K1913.rar/file
https://www.mediafire.com/file/htbv6z02cv0gpsm/SAT4K191330.rar/file
its possible to get a droi list multisat i try to use UP 09-10-2020-Channel list All 55East to 34.5West for-Viark Droi 4K or viark drs2 4k-BY-FENEKI
but doesnt works seems that the sats are stored on positions that doesnt match with my motor no signal in any sat
its possible to get a droi list multisat i try to use UP 09-10-2020-Channel list All 55East to 34.5West for-Viark Droi 4K or viark drs2 4k-BY-FENEKI
but doesnt works seems that the sats are stored on positions that doesnt match with my motor no signal in any sat
Yes i changed and now say calculating please wait it’s supposed to calculation with my location but let’s see if finish to calculate.
You have a diseq motor normal no? And works
Very strange it’s my firs no enigma2 box and I feel the difference
Yes I’m thinking is lnb golden media dual I have here other single lnb best Germany to test.
Conected directly to the lnb without motor its the same. Then should be the lnb
What amperage does the DRS output ?
Is the combined amperage of your LNB and motor exceeds what the DRS puts out youll get problems.
The above was always an issue on the early e1 boxes Dm500 etc.
for example if I connect my DRS2 to the motor and I use TM 0.1db sometimes the motor response and sometimes not and I notice does it more on horizontal transponders doesn't move and vertical transponders there is no problem m8
but if I change my LNB 0.2db or LNB 0.3db the motor works with no problems at all, I even tried LNB 0.1db from different manufacturer and still having problems to move the motorised sometimes move sometimes not m8
The dtt tuners works perfectly then if is a twin tuner should be ok the sat.
Could I test old firm version or the original firm ?