Hello to all,
For my previous Humax5300, I used 2 x diseqc-switch "4 to 1" combined with a 12V coax-switch. So I handled 8 LNB's, it worked fine. Now I have a Vantage HD7100S. In the LNB options, you can command 12V on/off, but there is no connections at the back to take the 12V command. So I have to replace the 12V coax-relais by a toneburst-switch? As I'd like to have more than 8 LNB's on it, is there a possible application to have a "8 to 1" switch with a "4 to 1" switch and a toneburst-switch? How do you perform the parametersettings then? I read with the diseqc 1.2, you can control 8 LNB's as you use the motor settings for it? Has anyone any experience in a combination of 12 LNB inputs and what settings to use? Thanks for any advice. Frank.
For my previous Humax5300, I used 2 x diseqc-switch "4 to 1" combined with a 12V coax-switch. So I handled 8 LNB's, it worked fine. Now I have a Vantage HD7100S. In the LNB options, you can command 12V on/off, but there is no connections at the back to take the 12V command. So I have to replace the 12V coax-relais by a toneburst-switch? As I'd like to have more than 8 LNB's on it, is there a possible application to have a "8 to 1" switch with a "4 to 1" switch and a toneburst-switch? How do you perform the parametersettings then? I read with the diseqc 1.2, you can control 8 LNB's as you use the motor settings for it? Has anyone any experience in a combination of 12 LNB inputs and what settings to use? Thanks for any advice. Frank.