USB configfile (multiboot) for All series
- Thread starter elgeneral
- Start date
- Messages
- 6,174
It gives you a multiboot option to choose with your RC to boot from usb, hdd, flash etc.
So if you only want your image in flash you don't need it.
But from what I understood sif enigma 0.3.0 version is only for usb or hdd. They should release flash version soon though.
same as these i think mate http://www.sat-universe.com/showpost.php?p=346691&postcount=1
Multiboot IpBox serie 9xxx
Multiboot IpBox serie 9xxx
Thx katapip
Multiboot IpBox serie 9xxx
Code:
Per istallare questo multiboot basta una pen USB formattata in FAT32
rinominare il file in : usb_update.img
copiare sulla penna spegnere il decoder inserire la penna USB nel decoder
accendere a tenere premuto il pulsante POWER appena appara la scritta BOOT/BOOTING
premere FRECCIA SU tutto sul forntale del decoder.
Il processo dura pochi secondi attendere la scritta DONE.
Da adesso in poi per passare da Flash a USB dovete premere all'avvio uno dei seguenti tasti:
*********************************
ITALIANO
Multiboot Aggiornamento file di configurazione per CubeRevo serie
se si desidera multiboot in funzione, scaricare allegati usb_config.img.
Quindi premere il pulsante numero che si desidera sul telecomando quando si avvia da arresto.
Multiboot funzione sostiene quanto segue stile.
# 1 di avvio con CDKroot (NFS)
# 2 boot da USB memory stick, con disco rigido interno
# 3 immagini originali come corrente di memoria flash
# 4 boot con NFS
# 5 boot da USB memory stick, ma senza disco fisso interno
# 6 il boot dal disco fisso interno SATA
# 7 il boot da memoria flash per un'altra immagine
Valore predefinito: n.3
**************************************
English
Update Multiboot config file for CubeRevo series
if you want multiboot function, download attached usb_config.img.
Then press number button which you want on RCU when start up from shutdown.
Multiboot function supports as below style.
# 1 boot with CDKroot(NFS)
# 2 boot from USB memory stick, with internal HDD
# 3 original images as current flash memory
# 4 boot with NFS
# 5 boot from USB memory stick, but without internal HDD
# 6 boot from internal SATA HDD
# 7 boot from flash memory for another image
Default value : no.3Thx katapip
This config file (second level boot image) will without any enviroment variables written to second level boot image, boot from
/dev/sda1
/dev/sdb1
(Depended on Remote Control button 1-5)
/dev/sda1 and /dev/sdb1 are the first patition on a Harddisk,USB-STICK or USB-HardDisk
DGS firmware will most of the time create 2 partions on USB devises one 1GB for firmware and the rest for recording when firmware in flash or USB/Harddisk is running.
You may have to do the partion on the harddisk / USB manual with fdisk.
This is just a short note, there are better info in How to Install enigma2 on Ipbox.
/dev/sda1
/dev/sdb1
(Depended on Remote Control button 1-5)
/dev/sda1 and /dev/sdb1 are the first patition on a Harddisk,USB-STICK or USB-HardDisk
DGS firmware will most of the time create 2 partions on USB devises one 1GB for firmware and the rest for recording when firmware in flash or USB/Harddisk is running.
You may have to do the partion on the harddisk / USB manual with fdisk.
This is just a short note, there are better info in How to Install enigma2 on Ipbox.
Turankeelo
Registered
- Messages
- 1
cuberevo hd same as ipbox 9000?
terabyte73
Registered
- Messages
- 2
I would like to install Enigma2 on usb, how do I proceed? do I have to install usb_update.img first and then I always have to install the usb_config_revo.img file in the flash?
Italy:
Vorrei installare Enigma2 su usb, come procedo? devo prima installare usb_update.img e poi devo installare sempre nella flash il file usb_config_revo.img ? :confuso:
Italy:
Vorrei installare Enigma2 su usb, come procedo? devo prima installare usb_update.img e poi devo installare sempre nella flash il file usb_config_revo.img ? :confuso: