TNER NOT DETECT ON DM800HD

[sarfraaz184]

I have dm800sim2.1 bootloader 76d today i start my box but tuner was nothing on many images i check my tuner other box tuner was ok i instal an other tuner on my box but problem was sam tuner empty it is not software problem
pls any sugesion
sarfraz

 

[saitek]

Hi sarfaaz184,

Check the Power Supply from your Box.
Sometimes the power supplies do not immediately die, but first give out only a few voltage.
Sometimes the box is still running, but is out too little voltage for the 14/18 Volt switching - and then comes 0 Volt to the LNB !

greetings saitek

 

[grillasso00]

tuner dead change tuner

 

[BM300]

Hello sarfraaz184,

In addition to what saitek wrote,
Did you change the image on the internal flash or try to do online update?

Some images give this error because of a wrong driver.
I had this problem recently after doing an online update and the problem got solved by replacing the image with another one.

 

[sarfraaz184]

Hello sarfraaz184,

In addition to what saitek wrote,
Did you change the image on the internal flash or try to do online update?

Some images give this error because of a wrong driver.
I had this problem recently after doing an online update and the problem got solved by replacing the image with another one.

yes i change image internal flash but nothing it is not driver problem

Hi sarfaaz184,

Check the Power Supply from your Box.
Sometimes the power supplies do not immediately die, but first give out only a few voltage.
Sometimes the box is still running, but is out too little voltage for the 14/18 Volt switching - and then comes 0 Volt to the LNB
greetings saitek

i change power supply too but same problem

 

[BM300]

Try this,

Check your box bootloader.
Refalsh the box with an older image.
Reload the bootloader that was shown on your box when conecting power supply.
Reboot box.

 

[sarfraaz184]

Try this,

Check your box bootloader.
Refalsh the box with an older image.
Reload the bootloader that was shown on your box when conecting power supply.
Reboot box.

bootloader is 76d and image is also with 76d bootloader
sarfraz

 

[BM300]

Load any image from last year,
followed by the bootloader and see what happens.

 

[sarfraaz184]

Load any image from last year,
followed by the bootloader and see what happens.

I LOAD 76C IMAGE AND 76C BOOTLOADER BUT STILL PROBLEM
SARFRAZ

 

[drhouse69]

take a look inside the dream and possibly some bloated capacitor