The final B8hx030000h CSA-RBT v2 table is online now.

R

Robertooo

Well Known Member
Messages
6,198
Do these CSA-RBT tables contain all of the possible keys? Or other data?

So can I use my CW list files too for searching the keys?
 
Butacas

Butacas

Registered
Messages
108
Tables are strings, and the more strings (V1) the table has, the more likely it is to find the key.

No, in this application for tables (RBT), you cannot include a file (list) containing CWs.
 
orangebirds

orangebirds

Well Known Member
Messages
2,249
Robertooo said:
Do these CSA-RBT tables contain all of the possible keys? Or other data?

So can I use my CW list files too for searching the keys?
Click to expand...
Nope... only 85-95% of it, because there are some details that's not included on the table

In theory, if you're looking for the whole key table, you'll need 3.5 PB of storage for one plaintext table
8 bytes for crypt8, 6 bytes for CW = 14 bytes for one entry

14 * 281.474.976.710.656 (total of keys from 00 00 - FF FF) = 3.940.649.673.949.184 bytes = 3.5 PB
time it by 3 (00h, FFh, 030000h), it will be 10.5 PB
 
R

Robertooo

Well Known Member
Messages
6,198
Now it starts to download and stops, I don't know why.
N-vtelen.png
 
K

klickklack

Donating Member
Messages
2,117
Robertooo said:
Now it starts to download and stops, I don't know why.
N-vtelen.png
Click to expand...
This cause i sayn you must use Jdownloader
there lot of probs, cause
1. your provider have limits
2. his provider have limits
3. there was a IP-changing
4. All FLAT-provider must change the IP for a day ------personel use , he must change it
5. when you have Direct-IP , all working , but you dont have this!
6. -929. blalbalslsvdfhghf
then you see end of day ---- all data you get ------lost!
change this! and all you see is good!

you must read the Rules of IP from FLAT-Providers.

or you asking KI
Übersicht mit KI
Weitere Informationen

In a FLAT IP network architecture, every device or component on the network is assigned a unique IP address, eliminating the need for hierarchical addressing or network segmentation. This approach simplifies network management and allows for seamless communication between all devices within the same network. However, it also presents challenges related to security and troubleshooting.

Here's a more detailed look:


Key Characteristics of FLAT IP Networks:
  • Simplified Addressing:
    Each device has a unique IP address, making it easier to identify and manage.
  • No Hierarchical Structure:
    Unlike traditional networks with hierarchical levels, a flat IP network does not use subnetting or VLANs.
  • Direct Communication:
    Devices can communicate directly with each other without needing to navigate network hierarchies.

Benefits of FLAT IP:
  • Simplicity: Easy to configure and manage, especially for smaller networks.
  • Seamless Communication: Devices can easily communicate with each other across the network.
  • Potential Cost Savings: In some cases, flat IP architectures can simplify network infrastructure and reduce management costs.

Challenges of FLAT IP:
  • Security Vulnerabilities: Lack of segmentation can make it easier for malware or unauthorized access to spread across the entire network.
  • Troubleshooting Complexity: Pinpointing the source of network issues can be more challenging without the aid of network hierarchies.
  • Single Point of Failure: If the central switch or hub fails, the entire network can go down.

Considerations for FLAT IP Implementation:
  • Network Size:
    FLAT IP is more suitable for smaller networks where security concerns are less critical.
  • Security Requirements:
    For larger or more sensitive networks, traditional network segmentation may be more appropriate.
  • Troubleshooting Capabilities:
    Ensure adequate monitoring and troubleshooting tools are in place to address any network issues.

In summary, while FLAT IP can offer advantages in terms of simplicity and ease of management, it's crucial to weigh the benefits against the potential security and troubleshooting challenges before implementing it in a network environment.




  • What Is Flat IP and Can It Save You Money? - LinkedIn
    20.12.2019 — The typical example is one where every digital HVAC and lighting controller has an IP address but the wall temperature s...


    LinkedIn ·
    Michael Phillips



  • Flat IP - Wikipedia
    Lack of redundancy: Flat networks typically rely on a single switch or central point of failure, increasing the risk of network ou...

    Wikipedia
and so on!
 
Last edited:
J

j0r

Registered
Messages
13
j0r said:
I have a question, when i find high value for all crypt8 it can be a b8hx30000h?
I always try to put all cw8 in rv2 but i never get a result, i should use v1 for better results?

example:
PID: 57Ah B8h-Crypt8:7F 79 C7 D3 D0 4D 7E EE [E] Count:2699
PID: 57Ah B8h-Crypt8:9C 3F 17 83 5B 3F B5 10 [E] Count:2698
PID: 57Ah B8h-Crypt8:28 03 3A E7 5F 48 8A 1F [E] Count:2697
PID: 57Ah B8h-Crypt8:8E C3 34 A4 9C C6 71 B8 [E] Count:2695
PID: 57Ah B8h-Crypt8:E7 DC 0B DF 6C CF 13 50 [E] Count:2695
PID: 57Ah B8h-Crypt8:EC ED 72 4C D3 96 77 BA [E] Count:2695
PID: 57Ah B8h-Crypt8:DA 17 7D B4 70 51 EE C9 [E] Count:2693
PID: 57Ah B8h-Crypt8:3B AB 01 85 0A F8 B6 2C [E] Count:2692

2whmtJ4n_o.png
Click to expand...
Hello guys,
recently i was trying to take a crypt8 valid.

i still having episodes like this :

PID: 57Ah B8h-Crypt8:1B EA 40 2F B2 86 E2 E5 [E] Count:319
PID: 57Ah B8h-Crypt8:31 09 85 22 DE 73 21 BE [E] Count:319
PID: 57Ah B8h-Crypt8:4F 70 1A 1C 5A B3 3C 42 [E] Count:319
PID: 57Ah B8h-Crypt8:6D DA F5 C8 93 D0 14 EF [E] Count:319
PID: 57Ah B8h-Crypt8:78 A1 08 63 6B AF 28 3F [E] Count:319
PID: 57Ah B8h-Crypt8:8F 62 DD BE 13 89 33 06 [E] Count:319
PID: 57Ah B8h-Crypt8:9E D9 F8 3B 75 6E 93 34 [E] Count:319
PID: 57Ah B8h-Crypt8:A7 48 17 54 AF F0 7A 02 [E] Count:319
In the same transponder there are 2 feeds, the first one i got it faster the crypt8 and cw valid with high value, while the second i still having like this crypt8, why?
The signal is like 70% and the first feed it worked without any problem, so it cant be the signal.
 
Last edited:
orangebirds

orangebirds

Well Known Member
Messages
2,249
j0r said:
Hello guys,
recently i was trying to take a crypt8 valid.

i still having episodes like this :

PID: 57Ah B8h-Crypt8:1B EA 40 2F B2 86 E2 E5 [E] Count:319
PID: 57Ah B8h-Crypt8:31 09 85 22 DE 73 21 BE [E] Count:319
PID: 57Ah B8h-Crypt8:4F 70 1A 1C 5A B3 3C 42 [E] Count:319
PID: 57Ah B8h-Crypt8:6D DA F5 C8 93 D0 14 EF [E] Count:319
PID: 57Ah B8h-Crypt8:78 A1 08 63 6B AF 28 3F [E] Count:319
PID: 57Ah B8h-Crypt8:8F 62 DD BE 13 89 33 06 [E] Count:319
PID: 57Ah B8h-Crypt8:9E D9 F8 3B 75 6E 93 34 [E] Count:319
PID: 57Ah B8h-Crypt8:A7 48 17 54 AF F0 7A 02 [E] Count:319
In the same transponder there are 2 feeds, the first one i got it faster the crypt8 and cw valid with high value, while the second i still having like this crypt8, why?
The signal is like 70% and the first feed it worked without any problem, so it cant be the signal.
Click to expand...
it happen sometimes on some feed, the only solution is to record longer, use box with autobiss or cudabiss
 
K

klickklack

Donating Member
Messages
2,117
HBO said:
CSA_B8hxFFh V2 torrent

www.mediafire.com

CSA_B8hxFFh_v2

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Click to expand...
But ... Please ,when all downloaded , let in SHARE 4 other people too .
iam sharing too , iam have already this tables , but others want this too like Colibri says ...
when i see lot of guys not sharing after downloaded , this was my last share!
So stay on share !
 
HBO

HBO

Registered
Donating Member
Messages
1,359
klickklack said:
But ... Please ,when all downloaded , let in SHARE 4 other people too .
iam sharing too , iam have already this tables , but others want this too like Colibri says ...
when i see lot of guys not sharing after downloaded , this was my last share!
So stay on share !
Click to expand...

I am the creator of this torrent file so I still seed when I turn on my computer


 
R

Robertooo

Well Known Member
Messages
6,198
I try to donwload FFh_v2 but only in the evenings for some hours at CET time and I can seed it the same time too generally every day. Last evening I could download it about 20 Mbit/s and now it's about on 20%.
 
You must log in or register to reply here.
Top