Just put together a new PC (Windows 10) and decided to buy the TBS6903 for it. Unfortunately, after selecting the card, it doesn't start, although SmartDVB then runs fine.
I've tried v0.5.3 (x64) and a few previous versions, but get the same result.
It works okay on ProgDVB and DVB Dream, but of course they're not free. I've always preferred SmartDVB, so want to use that if possible. Any suggestions welcome.
This is the relevant section from the SmartDVB log file:
13:33:04 - [0000 00017 00017391]: CDV::SELECTDEVICE 0 - TBS 6903 DVBS/S2 Tuner 0
13:33:05 - [0000 00018 00018391]: CStreamreader:: DevicePath set to \\?\pci#ven_544d&dev_6178&subsys_00016903&rev_00#6&15a14a97&0&0030020a#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{1f7c3bfb-f6dd-
13:33:05 - [0000 00018 00018391]: Client receiver Failed in read server command size Error:995
13:33:05 - [0000 00018 00018391]: CMDAPIClientHandler::AVThread error reading packet (error count 1)
13:33:05 - [0000 00018 00018391]: CMDAPIClientHandler::StopHandler CancelIO Ok
13:33:05 - [0000 00018 00018907]: StartMDAPIClient:: Starting Client
13:33:05 - [0000 00018 00018907]: StartMDAPIClient::CreateProcess Starting C:\Program Files\SmartDVB64\mdapi\mdapihost.exe
13:33:05 - [0000 00018 00018907]: >> StartMDAPIClients: restarting MDAPI clients on ERROR
13:33:05 - [0000 00018 00018907]: CMDAPIClientHandler::StartMDAPIClient called for \\?\pci#ven_544d&dev_6178&subsys_00016903&rev_00#6&15a14a97&0&0030020a#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{1f7c3bfb-f6dd- 0
13:33:05 - [0000 00018 00018907]: CMDAPIClientHandler::StartMDAPIClient Client not found adding
13:33:05 - [0000 00018 00018907]: >> CMDAPIClientHandler::AVThread Started
13:33:05 - [0000 00018 00018922]: Failed to select Device (bdas.dev) TBS 6903 DVBS/S2 Tuner 0
13:33:05 - [0000 00018 00018922]: Error starting device TBS 6903 DVBS/S2 Tuner 0 [Device ID : 0]
System details FWIW:
MSI MAG B550 Tomahawk motherboard, AMD Ryzen 5600X, 16GB RAM, Geforce RTX 2060 graphics card.
I've tried v0.5.3 (x64) and a few previous versions, but get the same result.
It works okay on ProgDVB and DVB Dream, but of course they're not free. I've always preferred SmartDVB, so want to use that if possible. Any suggestions welcome.
This is the relevant section from the SmartDVB log file:
13:33:04 - [0000 00017 00017391]: CDV::SELECTDEVICE 0 - TBS 6903 DVBS/S2 Tuner 0
13:33:05 - [0000 00018 00018391]: CStreamreader:: DevicePath set to \\?\pci#ven_544d&dev_6178&subsys_00016903&rev_00#6&15a14a97&0&0030020a#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{1f7c3bfb-f6dd-
13:33:05 - [0000 00018 00018391]: Client receiver Failed in read server command size Error:995
13:33:05 - [0000 00018 00018391]: CMDAPIClientHandler::AVThread error reading packet (error count 1)
13:33:05 - [0000 00018 00018391]: CMDAPIClientHandler::StopHandler CancelIO Ok
13:33:05 - [0000 00018 00018907]: StartMDAPIClient:: Starting Client
13:33:05 - [0000 00018 00018907]: StartMDAPIClient::CreateProcess Starting C:\Program Files\SmartDVB64\mdapi\mdapihost.exe
13:33:05 - [0000 00018 00018907]: >> StartMDAPIClients: restarting MDAPI clients on ERROR
13:33:05 - [0000 00018 00018907]: CMDAPIClientHandler::StartMDAPIClient called for \\?\pci#ven_544d&dev_6178&subsys_00016903&rev_00#6&15a14a97&0&0030020a#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{1f7c3bfb-f6dd- 0
13:33:05 - [0000 00018 00018907]: CMDAPIClientHandler::StartMDAPIClient Client not found adding
13:33:05 - [0000 00018 00018907]: >> CMDAPIClientHandler::AVThread Started
13:33:05 - [0000 00018 00018922]: Failed to select Device (bdas.dev) TBS 6903 DVBS/S2 Tuner 0
13:33:05 - [0000 00018 00018922]: Error starting device TBS 6903 DVBS/S2 Tuner 0 [Device ID : 0]
System details FWIW:
MSI MAG B550 Tomahawk motherboard, AMD Ryzen 5600X, 16GB RAM, Geforce RTX 2060 graphics card.