Hello guys ! I'm facing a problem with blindscan in EBSPro with my TBS 6983 card.
I'm using windows 10 64bit and the issue is the following :
I'm doing a full range blind-scan for example on Eutelsat 10e for SRs from 100 to 8000. Some TPs don't appear in the results but i know they are there !! DVB Dream tunes perfectly on those transponders with AGC 99% and SNR 80+% so obvioulsy reception is not an issue..
I'm using BLScan2 mode and i ran it several times playing around with the settings of BDA type on EBSPro -> File -> Options -> Device Options -> BDA Type : Changed from autodetect to other values , and the outcome is as follows ..
With autodetect i'm missing the alive transpoders i'm talking about, when i changed to Windows 7 BDA i saw the transpoders just like i saw them also with the TBS_NXP setting !!
I scanned again and again changing the settings around to be sure about my "troubleshooting" and as it seems my conclusion was correct until i finally set it to Windows 7 BDA value.. i ran a final scan again and the TPs now were NOT there ! I got the same results like the ones i got when i used the autodetect setting..
I tried both tuners A and B !
Anybody facing the same problem, faced it and solved it already ??
I looked around for such a topic in the forum but unfortrunately found nothing
Maybe the problem is sth else ?? I'm really confused..
Your help is HIGHLY appreciated ..
P.S : i'm trying with autodetect setting again but with the slow BLscan mode (not BLScan2 ..) this time. I will post the results asap.
I'm using windows 10 64bit and the issue is the following :
I'm doing a full range blind-scan for example on Eutelsat 10e for SRs from 100 to 8000. Some TPs don't appear in the results but i know they are there !! DVB Dream tunes perfectly on those transponders with AGC 99% and SNR 80+% so obvioulsy reception is not an issue..
I'm using BLScan2 mode and i ran it several times playing around with the settings of BDA type on EBSPro -> File -> Options -> Device Options -> BDA Type : Changed from autodetect to other values , and the outcome is as follows ..
With autodetect i'm missing the alive transpoders i'm talking about, when i changed to Windows 7 BDA i saw the transpoders just like i saw them also with the TBS_NXP setting !!
I scanned again and again changing the settings around to be sure about my "troubleshooting" and as it seems my conclusion was correct until i finally set it to Windows 7 BDA value.. i ran a final scan again and the TPs now were NOT there ! I got the same results like the ones i got when i used the autodetect setting..
I tried both tuners A and B !
Anybody facing the same problem, faced it and solved it already ??
I looked around for such a topic in the forum but unfortrunately found nothing
Maybe the problem is sth else ?? I'm really confused..
Your help is HIGHLY appreciated ..
P.S : i'm trying with autodetect setting again but with the slow BLscan mode (not BLScan2 ..) this time. I will post the results asap.