Hi i have tried to put the triple to work and nothing..
Can you be more specific:
What version of oscam?
What OS Linux E2 or others?
What config in oscam.server?
What card seca, ***, Naagra???
For me is a che.t reader i have tried all the config
#protocol = mouse
#protocol = smartreader
#detect = cd
#device = /dev/ttyUSB0
#device = /dev/triplereader_TEST00
#device = /dev/ttyUSB1
#device = TripleP1;Serial:000004ba
#device = Serial:00000xxx #smargo triple
#device_out_endpoint = 0x81 #smargo triple
#device_out_endpoint = 0x83 #smargo triple
#device_out_endpoint = 0x85 #smargo triple
smargopatch = 0
And nothing it detects my nagra card but after reading the Entitlements of the card with errors it disconnect from the card.
Oscam developers dont give any suport for the Triple as they say in this ticket
hxxp://xxx.streamboard.tv/oscam/ticket/3058
"Resolution set to wontfix
Status changed from new to closed
I don't think there will be a solution. The problem is your triplereader which is a bad and bugged device. There won't be anything fixed here by us, either the manufacturer fixes his device or you buy a proper one. That's also the reason why we stopped trying to get Smartreader mode working for this device as there's simply no possiblity to solve the problems from our side."
So i by a Easymouse 2 USB Smartmouse Programmer and what a good reader is ...
no software and no tool for this reader available!
to run this you have to edit the udev rules
FROM THEIR WEBSIDE:
Code:
Other
.................................................. .................................................. ..........
Example of assigning new device names and serial numbers to the Argolis Triple Reader.
First you need to modify/read the serial number/name of the triplereader, for example: lsusb -d 403:6011 -v | grep iSerial
The response is for example:
Serial number: 00000001
Readername: triplereader_TEST
The new names for the triplereader with serial number 00000001 will be:
P1 = /dev/triplereader_TEST00
P2 = /dev/triplereader_TEST01
P3 = /dev/triplereader_TEST02
EXAMPLE FOR UDEV RULES
Code:
# Place the file in /etc/udev/rules.d/
# By reconnect the triple reader it will be assigned to the new device names.
# Read the serial number of the triplereader: lsusb -d 403:6011 -v | grep iSerial
SUBSYSTEMS=="usb" ENV{ID_IFACE}="$attr{bInterfaceNumber}"
KERNEL=="ttyUSB*", ATTRS{serial}=="00000001" SYMLINK+="triplereader_TEST$env{ID_IFACE}"
#Serial number: 00000001
#Readername: triplereader_TEST
#The new names for the triplereader with serial number 00000001 will be:
#P1 = /dev/triplereader_TEST00
#P2 = /dev/triplereader_TEST01
#P3 = /dev/triplereader_TEST02
SUBSYSTEMS=="usb" ENV{ID_IFACE}="$attr{bInterfaceNumber}"
KERNEL=="ttyUSB*", ATTRS{serial}=="0000ABCD" SYMLINK+="my_READER$env{ID_IFACE}"
#Serial number: 0000ABCD
#Readername: my_READER
#The new names for the triplereader with serial number 0000ABCD will be:
#P1 = /dev/my_READER00
#P2 = /dev/my_READER01
#P3 = /dev/my_READER02
have a look here
HERE
P.S.
I know 100% that it works with oscam