MADRIDISTA
Registered
- Messages
- 1,025
Entering submenu- service mode >
press and hold red button on the remote control unit and plug the receiver in,
after boot is finished, submenu service mode is enabled and it is possible to test several sections of the receiver.
tested on neotionbox 501 / 1000 (not tested on nb 601)
press and hold red button on the remote control unit and plug the receiver in,
after boot is finished, submenu service mode is enabled and it is possible to test several sections of the receiver.
tested on neotionbox 501 / 1000 (not tested on nb 601)