s*y uk

V

Vipersan

Senior Member
Messages
134
..Hi Chucky..
Sly card should work just fine with diablo/underworld.
I am currently using my freesat card for watching Channel4 HD ..using this combo.
You will however need to access the service menu on your sly box and copy down the box serial number..
This you then enter into the diablo cam as the boxkey..
fill up any spare spaces in the box key with zero's.
You will however have to return your card to the origional sly box periodically for updates or the card will turn off.
..as the diablo cam cannot handle updates.
rgds
 
C

chuckysat

Member
Messages
54
Sly card should work just fine with diablo/underworld.
I am currently using my freesat card for watching Channel4 HD ..using this combo.
You will however need to access the service menu on your sly box and copy down the box serial number..
This you then enter into the diablo cam as the boxkey..
fill up any spare spaces in the box key with zero's.
Click to expand...

Using this the only open channels I get are CH4 and CH4 HD

with ita *** cards mgcamd+necws work fine...
Click to expand...

are you writing your boxkey into newsc.xlm?

When using mgcamd+newcs the box reboots when I put card in. I am using SifTeam 0.1.3 r7712
 
V

Vipersan

Senior Member
Messages
134
...Sorry Chuckysat..
I just assumed it would work for sly channels as well as CH4 etc ...as I can't see any reason why it wouldn't.
I had no way to confirm it as I don't have a sly subscription.
rgds
 
X

xxxAxxx

Super VIP
Messages
1,172
chuckysat said:
Using this the only open channels I get are CH4 and CH4 HD



are you writing your boxkey into newsc.xlm?

When using mgcamd+newcs the box reboots when I put card in. I am using SifTeam 0.1.3 r7712
Click to expand...


if you useing newcs1.50 or 1.60 you will not need the box id in the xml...newcs will read auto...
 
B

Bacardi

Senior Member
Messages
289
chuckysat

I tried my card last night (sorry do not sub to films or sport) and they all cleared on my diablo with underworld 1.24 and 1.25. I also tried my dragon and all worked ok, but it seemed to switch faster.
 
V

vegeku90

Well Known Member
Messages
1,586
sorry i've read this thread again only now

anyway i need not to put box key...if you download mgcamd+newcs from download panel it should work well
 
B

betas

Member
Messages
82
i am using 2.09cc on Eagle clone of DM500 works perfect on any 28e ca-d No box no ether another box very good for 28e is manhattan xt with card reader TM 3500.
ps deablo cam is good but some times slow and cam needs uploading and needs refreshing so only ok if you have cas 3 and internet
dragon is very good and fast but wont refresh card needs box no for premium channels.
PS any body know off a deablo version which works all the time ?
 
B

Bacardi

Senior Member
Messages
289
chuckysat
i am useing SifTeam-0.1.3-r7712

vegeku90
I thought n*s uk was only working on ccam? i tried last night after getting the gamma running, but i could not get anything out of it.


thanks
 
B

bazinshine

Senior Member
Messages
138
Bacardi said:
chuckysat
i am useing SifTeam-0.1.3-r7712

vegeku90
I thought n*s uk was only working on ccam? i tried last night after getting the gamma running, but i could not get anything out of it.


thanks
Click to expand...

i think problem is the *** card with the card-reader,, i read it only work using external card reader with newcs+mgcamd on 9000 currently,
 
B

Bacardi

Senior Member
Messages
289
from memory the only changes i made were, caids to uk and card-emu (instead of emu-card. I then rebooted the box.
 
C

chuckysat

Member
Messages
54
hmmm very strange went back to 1.24 and its working so reloaded 1.25 and now works fine :)

thanx all for replies
 
You must log in or register to reply here.
Top