RCS DigiTV **CHAT [N3 Switchover/Key Chat etc]**(Only chat, pls no keys)
- Thread starter tjeo
- Start date
- Status
Problem of Active key of DIGI tV and resolution
You may have problem With the active key of DIGI Tv
However Starsat devices or other devices, despite the arrest of Auto Roll
So that it changes the number 77 and turn into d9
The solution is to correct the Key whenever there is a problem with you
Waiting in the new Key that will be correct the problem..
You may have problem With the active key of DIGI Tv
However Starsat devices or other devices, despite the arrest of Auto Roll
So that it changes the number 77 and turn into d9
The solution is to correct the Key whenever there is a problem with you
Waiting in the new Key that will be correct the problem..
DIGI TV has changed revision of software in the cards so it will take some time to study the new algorithm to find the keys. DigiTV now uses ROM 110 AC8 (Nagra2). Digi TV tonight (last night) puts a new patch to nagra 2, so it will be tomorrow during the new key!!
we all live in hope,soon though n2 will be gone forever.
n3 is notgoing to be around for some time.
there must be easier options??
n3 will require new (expensive) hardware.
lets take another look at irdeto and conax,viacess and mediagaurd,etc:.
aclue to irdito 2 was laid open in a bin file for matrix reborn,
it was if my memory, which aint good, firfly or similar.
it contains the info for erdito,gained from a card clone.
n2 and 3 have been running alongside on many providers before switch over.
this contains clues to the n3 key alog.
if only i was 17 again,but then i would be out chasing birds again just like last time in stead of watching them on the tele.lol
so i leave it to the new generation to think about new keys and formats.
now lets be plain about this,
many cams,yes there are. but they all have the same setup.
basicaly they have two main I C ,s
the second is the matrix ,this aceppts CW.(constant word).
the first is writing to the second.
is pre - designated to accept alogarithmsfor various formats.
if you look at the bin files in hex editor you can see the various inputs for keys , followed by the alogarithum for each system.
what you actually see is the programwhich WRITES TO THE FIRST IC.
this the converts to machine code to deliver to the second IC.
this is in CW.
you can look at this on your reciever,info .via,conax,etc,
you can sometimes find CW.but you needa machine code converter in your cam to accept this key.dragon upwards can usually do this.
upwards ,...i refer to the evolution of the first IC.
all the second IC,S are basically the same.
so what am i trying to say,where do we go from here.
damed if i know...................but it aint CS.
n3 is notgoing to be around for some time.
there must be easier options??
n3 will require new (expensive) hardware.
lets take another look at irdeto and conax,viacess and mediagaurd,etc:.
aclue to irdito 2 was laid open in a bin file for matrix reborn,
it was if my memory, which aint good, firfly or similar.
it contains the info for erdito,gained from a card clone.
n2 and 3 have been running alongside on many providers before switch over.
this contains clues to the n3 key alog.
if only i was 17 again,but then i would be out chasing birds again just like last time in stead of watching them on the tele.lol
so i leave it to the new generation to think about new keys and formats.
now lets be plain about this,
many cams,yes there are. but they all have the same setup.
basicaly they have two main I C ,s
the second is the matrix ,this aceppts CW.(constant word).
the first is writing to the second.
is pre - designated to accept alogarithmsfor various formats.
if you look at the bin files in hex editor you can see the various inputs for keys , followed by the alogarithum for each system.
what you actually see is the programwhich WRITES TO THE FIRST IC.
this the converts to machine code to deliver to the second IC.
this is in CW.
you can look at this on your reciever,info .via,conax,etc,
you can sometimes find CW.but you needa machine code converter in your cam to accept this key.dragon upwards can usually do this.
upwards ,...i refer to the evolution of the first IC.
all the second IC,S are basically the same.
so what am i trying to say,where do we go from here.
damed if i know...................but it aint CS.
Last edited:
this all looks just like the stuff we went through with di** netw**k here in the USA right before the final switch over over to N3 a couple of months ago. It's all a "done deal" now, with all fta and plastic secured. No tv unless you can get a few true fta channels. I know this is not what all you guys and gals want to here, but it's true, N3 is the end of "free" tv.
- Messages
- 10,303
King of Sat has shown Nagra2 & Nagra3 on RCS DigiTV for ages now (look at there listing for Zone Romatica on 12563H for example, last updated 9th March 2008!! And Nagra3 listed)......because RCS DigiTV is currently using both EXACTLY the same as Premiere did for over a year (nearly two) before they switched Nagra2 OFF.....
- Messages
- 10,303
But still working here: which file/firmware/software/softcam you using Dragon, T-Rex, Diablo, Matrix, Predator, Stealth, Underworld, CCAM..etc...which receiver etc?
Are you still getting the Free to Air transmission A2 Macedonia ok?
12607V 27500 3/4 @ Intelsat 10-02 (1.0W)
Are you still getting the Free to Air transmission A2 Macedonia ok?
12607V 27500 3/4 @ Intelsat 10-02 (1.0W)
[email protected]
Registered
- Messages
- 2
Latest RCS DigiTV keys (0.8/1W)
The codes changed. Any new ones?
The codes changed. Any new ones?
ciprianlogofatu
Registered
- Messages
- 1
how can setting the TD for Digi TV 1W Thor? thanks
U can put ur question in the main section of ur receiver till somebody help u there...
dont call evil
i won't but i hope after digi tv changes nargra 3 would be cracked and we would have D+ back for a bit untill nagra 4 !
- Status