Qviart DUAL Experimental Receiver

[raul7]

How do you return to factory condition the Qviart dual??

android,enigma ou iks ?

 

[alen5555]

Hi
How to switch from Android part(My Launcher) to Engima 2 part
Tnx

 

[osianese]

Menu - E2 and go to number 1 or 2,3,4
where you have the normal E2 on the 1

 

[Ferret]

Hi
How to switch from Android part(My Launcher) to Engima 2 part
Tnx

What Launcher are you using ?

Have you not tried the latest Android Firmware, 1.04 yet ?

 

[alen5555]

Tnx friends i hawe solved the problem like osianese mentioned
Ferret i’m still playing with Enigma 2 part android i will try later
I think inside for now is 1.02 v
Thank you

 

[ak2010]

My Qviart dual 4K can not boot on android 9 after the recovery process using Hitool, Is there new software to solve this problem? It seems the January 2023 dump file can not solve the problem. Please assist me to solve this problem

 

[cokeaddict]

My Qviart dual 4K can not boot on android 9 after the recovery process using Hitool, Is there new software to solve this problem? It seems the January 2023 dump file can not solve the problem. Please assist me to solve this problem

Try downloading the 5.00-Qviart-DUAL.bin

Format usb stick fat32 (make sure it is not write protected, so use something like HPUsbTool to be sure it is properly fat32 formatted).

In the root of the usb, create a folder RomUpdate.

Add the 5.00-Qviart-DUAL.bin to the new RomUpdate folder and then rename it to RomUpdate.bin

Power off the box at the rear, insert the usb stick, press and hold power button on the front, and power on the box at the rear whilst still holding the front power button.

When you see UPdt on the front panel, let go of the power button, and press it a couple of times until you see UPdt again, then release the button and wait.

You should see the update process on the tv screen (takes about 5 minutes).

Once complete the box "should" boot android again.

If it does, then you should be able to update to Qviart DUAL (1.04) (Special).bin again if you want to connect to F/S.

 

[azerty9200]

good evening, at home I receive the channels with the E2 (openatv) but not with the android the free works but the encrypted not I watch and the signal and at zero while the free is signal is good Do you have an idea THANKS

bonsoir ,chez moi je reçois les chaînes avec le E2 (openatv) mais pas avec l'android les free fonctionnent mais les criptée pas je regarde et le signal et à zéro tandit que la free est signal est bon auriez-vous une idée merci

 

[Ferret]

The E2 side works perfectly, the Android side has issues with scanning and moving a usuals motor.

What dish/LNB setup do you have motorized or single dish ?

Also to watch encrypted channels on the Android side you need a SP1 or SP2 upgrade.

 

[azerty9200]

I bought this qviart because I saw that the sky(it) works on the photos above #2 and now it doesn't work !! where to find this SP1 or SP2 upgrade THANKS

j'ai acheté ce qviart car j'ai vu que les sky(it) fonctionne sur les photos çi dessus #2 et maintenant ça ne fonctionne pas !! où trouver ce SP1 ou SP2 upgrade merci

 

[kegnkiwi]

I bought this qviart because I saw that the sky(it) works on the photos above #2 and now it doesn't work !! where to find this SP1 or SP2 upgrade THANKS

j'ai acheté ce qviart car j'ai vu que les sky(it) fonctionne sur les photos çi dessus #2 et maintenant ça ne fonctionne pas !! où trouver ce SP1 ou SP2 upgrade merci

But in post number two is does say that you can then subscribe to sp1

We install aurora.apk and the server PTPro.IM.140 will be activated

And we can subscribe to VIP SP1

and activate Sky Deutschland on ASTRA 19E,
Sky Italia on Hotbird 13E,
Sky UK on ASTRA 28E

 

[manic01]

I bought this qviart because I saw that the sky(it) works on the photos above #2 and now it doesn't work !! where to find this SP1 or SP2 upgrade THANKS

j'ai acheté ce qviart car j'ai vu que les sky(it) fonctionne sur les photos çi dessus #2 et maintenant ça ne fonctionne pas !! où trouver ce SP1 ou SP2 upgrade merci

You need to Google and many options will be shown, we cannot advise of any supplier on here as its against forum rules sorry.

 

[Ferret]

I bought this qviart because I saw that the sky(it) works on the photos above #2 and now it doesn't work !! where to find this SP1 or SP2 upgrade THANKS

j'ai acheté ce qviart car j'ai vu que les sky(it) fonctionne sur les photos çi dessus #2 et maintenant ça ne fonctionne pas !! où trouver ce SP1 ou SP2 upgrade merci

It works with SP upgrade on the Android side with the satellites scaned in or my motor channel list

Google Forever SP1

 

[Ferret]

Read this as well

Qviart Dual 4k Uhd Linux Enigma2+Android 9.0 Combo Review & Setup Guide

Qviart Dual 4k Uhd Linux Enigma2+Android 9.0 Combo Review & Setup Guide With a spec DVB-S2X+T2/C H.265 IPTV 2GB RAM 16GB the Dual is fairly well specced to feature Android and Enigma 2 on the same receiver. The Android side of this box is capable of using Forever SP codes. The Dual in my...

www.sat-universe.com

 

[ak2010]

Try downloading the 5.00-Qviart-DUAL.bin

Format usb stick fat32 (make sure it is not write protected, so use something like HPUsbTool to be sure it is properly fat32 formatted).

In the root of the usb, create a folder RomUpdate.

Add the 5.00-Qviart-DUAL.bin to the new RomUpdate folder and then rename it to RomUpdate.bin

Power off the box at the rear, insert the usb stick, press and hold power button on the front, and power on the box at the rear whilst still holding the front power button.

When you see UPdt on the front panel, let go of the power button, and press it a couple of times until you see UPdt again, then release the button and wait.

You should see the update process on the tv screen (takes about 5 minutes).

Once complete the box "should" boot android again.

If it does, then you should be able to update to Qviart DUAL (1.04) (Special).bin again if you want to connect to F/S.

Hi my brother, I have done that but still it can not update android. Is my android damaged and can not be recovered? Applications are running like play store, Youtube, etc but you can not install any android software. when you press ok button does not install

 

[Ferret]

Hi my brother, I have done that but still it can not update android. Is my android damaged and can not be recovered? Applications are running like play store, Youtube, etc but you can not install any android software. when you press ok button does not install

Factory reset the Dual

Flash 5.00
Factory reset
Then 1.04
Factory reset

Then set it up.

 

[cokeaddict]

Hi my brother, I have done that but still it can not update android. Is my android damaged and can not be recovered? Applications are running like play store, Youtube, etc but you can not install any android software. when you press ok button does not install

RomUpdate.bin should be inside a folder called RomUpdate.

 

[osianese]

hi yesterday the new android 5.00-Qviart-DUAL-v.2023 came out you could have more info and if you install the forever server is it active or you have to wait for the change
Thank you

 

[Ferret]

hi yesterday the new android 5.00-Qviart-DUAL-v.2023 came out you could have more info and if you install the forever server is it active or you have to wait for the change
Thank you

This is not new firmware it has just been relinked to.

 

[sadolina]

Hello, I have a question why the Qviart dual when it is in the stand bay can't be started only by pressing the on off button on the back