Qviart Dual 4k Uhd Linux Enigma2+Android 9.0 Combo Review & Setup Guide Experimental Receiver

[FENEKI]

hi, does the receiver tune the channels of the Abertis bouquet at 30W° with the android side?

Yes

 

[dragon6969]

Thanks a lot for the answer

 

[azerty9200]

I had an issue at the weekend were is tried to update slot 1 to openatv to 7.3 on the dual. I used slot one to go from 6.4 to 7.3 but the ota update would not work for me, so I used the usb update option and updated the image but when it flashed it i had an issue. I think the new image was set to run at 4k. As i use a 1080p splitter all i got was a blank screen. Pressing buttons on the remote showed as responsive on the receiver. I eventually checked the webif to see what was on screen and it showed me i had put the receiver into German. Not really understanding German and not able to change the language back i muddled through and reflash another image but i put open blackhole into slot one. This was all ok other than i could not find a way to flash other images into slots 2,3,4. i decided to try the recovery option of switching off at the back and then back on and pressing ok on the remote constantly. This took me into the recover menu and i was able to reflash openatv on slot 1. This really is a good option to know and it worked well for me.

hello, if I tell you that means that we can flash several E2-openatv 7 images on 1, openpli8 on 2 etc.. etc.. fair or not and each image has its ccam or else an ncam for all
bonjour ,si je vous bien ça veut dire que l'on peut flasher plusieures image E2-openatv 7 sur le 1,openpli8 sur la 2 etc..etc.. juste ou pas et chaque image à sa ccam ou bien une ncam pour toutes

merci

 

[kegnkiwi]

hello, if I tell you that means that we can flash several E2-openatv 7 images on 1, openpli8 on 2 etc.. etc.. fair or not and each image has its ccam or else an ncam for all
bonjour ,si je vous bien ça veut dire que l'on peut flasher plusieures image E2-openatv 7 sur le 1,openpli8 sur la 2 etc..etc.. juste ou pas et chaque image à sa ccam ou bien une ncam pour toutes

merci

Yes you can have openatv in slot 1, pure2 in slot 2, openspa in slot 3 and blackhole in 4 if you wish. I would suggest openatv in slot one as it makes it easier to flash the other images. Each image has its own cams and set up.

 

[doctor no]

Its possible to have cccam or oscam on android ?

 

[kegnkiwi]

Its possible to have cccam or oscam on android ?

I do not think so as its a modified version of android to run the forever server. In the past i believe it was possible until the new software was release on version 1.04.

 

[kegnkiwi]

iyi günler bende qviart dual 4k aldım hazır imaj backup ları hangi siteden bulabilirim

If possible can you please post in english. I have not seen any back up images we usually just set our own up. There are many images from openatv, pure2, openblackhole, openpli, and cobraliberosat and openspa.

 

[osianese]

HI
I wanted to ask if anyone with qviart dual
takes this frequency 12303 v 2/3 31400 multistream (canale 21,tv luna,canale8,and others)
on sat 9est with android
Thank you

 

[Ferret]

No i

HI
I wanted to ask if anyone with qviart dual
takes this frequency 12303 v 2/3 31400 multistream (canale 21,tv luna,canale8,and others)
on sat 9est with android
Thank yo

I could not scan it.

 

[cokeaddict]

HI
I wanted to ask if anyone with qviart dual
takes this frequency 12303 v 2/3 31400 multistream (canale 21,tv luna,canale8,and others)
on sat 9est with android
Thank you

Isn't that beam, very tight on Italy ?

 

[osianese]

maybe there is some tuner problem or image (sw)
it concerns multistreams because some people find them but others don't

 

[FENEKI]

maybe there is some tuner problem or image (sw)
it concerns multistreams because some people find them but others don't

I can pick up my location 5West multistream have you tried Blind Search and also do you live in italy

 

[osianese]

the problem is only on android and not enigma2
I tried everything, only some frequencies it picks up while others don't and also the tuner is s2x it seems strange to me that it can't find them

 

[FENEKI]

the problem is only on android and not enigma2
I tried everything, only some frequencies it picks up while others don't and also the tuner is s2x it seems strange to me that it can't find them

I don't think so it's tuner most probably a buck in the software because picks up all 5west multistream with no problems

we'll wait for a new SW will see if they can fix it

 

[cokeaddict]

the problem is only on android and not enigma2
I tried everything, only some frequencies it picks up while others don't and also the tuner is s2x it seems strange to me that it can't find them

Did you try inputting the details manually and see if it then finds a signal to scan ?

 

[osianese]

as already said I did everything by hand but can not find them
we are waiting for the new sw

 

[doctor no]

Hi why autmatic & blind scan in andoide not exist

 

[kegnkiwi]

Hi why autmatic & blind scan in andoide not exist

There is a blind scan on the android side. With the 1.06 software sometimes it can be a bit glitchy, depends on with satellite you want to scan.

 

[Ferret]

Hi why autmatic & blind scan in andoide not exist

Under Channel Search-Satellite-Antenna Configuration

Scroll to start search option.

Now use the cursor button the ring around the ok button to select blind scan.

 

[osianese]

also tried with blind scan. and the channels
multistream can't find them