PowerVu Chat [only chat, don‘t post keys here]

[iq180]

Thank you iq180, but ECM keys only last a couple of days and the problem start over

Thats why im asking for a fresh new EMM key, so it will autoroll everytime ecm key changes.

I also have a similar stb like you, i have a gtmedia v8UHD and it worked fine on 3720tp, the problem is EMM keys are encrypted inside this stb so i cant use those EMM keys on my Dreambox 920 (enigma2 linux stb).

Yes I know what was done to the GTmedia receivers and why it was done, I had a hand in it my self, people were getting the EMM keys then posting them in the open or selling them on the net, it had to stop, but on the other hand you can still add your own EMM keys if you have them and extract ECM keys to use on other receivers, it's a win, win.

 

[iq180]

i'm watching 58w/3720v right now, using the same box, configs & emm keys i have for the last year, but oscam 11590 is from a different build. same goes for 55w/4015h.
https://ibb.co/w4ddFQR

The same EMM and ECM key for 55.0w TP-4015 works for 40.5w-TP-4095, or it did the last time I checked.

 

[Kb Cool]

Yes I know what was done to the GTmedia receivers and why it was done, I had a hand in it my self, people were getting the EMM keys then posting them in the open or selling them on the net, it had to stop, but on the other hand you can still add your own EMM keys if you have them and extract ECM keys to use on other receivers, it's a win, win.

Thats great and all but, GTmedia needs to learn how to make a better receiver. Maybe instead of going for low cost. low end junk. They should charge more and make a quality modern product.

 

[adecam]

Thats great and all but, GTmedia needs to learn how to make a better receiver. Maybe instead of going for low cost. low end junk. They should charge more and make a quality modern product.

Perfect, a truth that someone from the Official Forum needed to "hear"

 

[adecam]

The Chinese boxes have solved the changes in the hashmode, here, in the sat-universe.

 

[Kb Cool]

Perfect, a truth that someone from the Official Forum needed to "hear"

Well in all fairness. I have to mention that my freesat v8 Super isn't that bad. Has good Picture quality and it works well. It's that train wreck android GT-GTS box that turned me off of their products. I used it for a day and been unplugged ever since except to try their latest update that doesn't seem to fix anything. Anyways i would like to see them build a $150-$200 box with a good remote control and maybe a HI silicon chipset.

 

[xsat]

Hi,
I also have the same problem.
Recent OScams have invalid EMM in SoftCam
The PowerVu channel is stopped.
Then, if a valid EMM is found, it will auto-roll and display the image.
So, I have to delete expired EMM on SoftCam file.
Which OScam solves this problem?

Thanks in advance,

 

[ro_54]

Hi,
I also have the same problem.
Recent OScams have invalid EMM in SoftCam
The PowerVu channel is stopped.
Then, if a valid EMM is found, it will auto-roll and display the image.
So, I have to delete expired EMM on SoftCam file.
Which OScam solves this problem?

Thanks in advance,

i found an 11590 version build by mohamed_os witch is smaller then juli's, but works on my vu+04k. juli's build stops after few min.

 

[xsat]

Thanks for the helpful information ro_54.

Try the latest build with mohamed_os.

thanks again!

 

[iq180]

Well in all fairness. I have to mention that my freesat v8 Super isn't that bad. Has good Picture quality and it works well. It's that train wreck android GT-GTS box that turned me off of their products. I used it for a day and been unplugged ever since except to try their latest update that doesn't seem to fix anything. Anyways i would like to see them build a $150-$200 box with a good remote control and maybe a HI silicon chipset.

That GT-GTS was a bad idea that never got any better, the freesat V8 super was in its day a good receiver, if you like the V8 Super you would love the new V8-X,JMHO.

 

[Rambohack]

i found an 11590 version build by mohamed_os witch is smaller then juli's, but works on my vu+04k. juli's build stops after few min.

Thank you very much ro_54!!

Problem solved! Tp 3720 @ 58 West autorolling perfectly fine in under 5 minutes :clapping:

The problem was the Oscam 11581 i was using.

As soon as i installed Mohamed_os 11590 Oscam autorolled inmediately usingo same old EMM keys i was using for the las year i think.

Thank again, for the oscam tip :thum:

 

[ro_54]

no problem.
are you using oscam for arm based box ?

 

[Rambohack]

no problem.
are you using oscam for arm based box ?

Yes, Dreambox 920 4K, same Oscam as your vu+ 4K.

 

[ro_54]

Yes, Dreambox 920 4K, same Oscam as your vu+ 4K.

so, this tells me that oscam/emu-arm4k 11590, juli build is not ok.

 

[Kb Cool]

That GT-GTS was a bad idea that never got any better, the freesat V8 super was in its day a good receiver, if you like the V8 Super you would love the new V8-X,JMHO.

My whole point is i don't want a $50 receiver with a crappy remote. How about telling them to build something at least on par with a Dinobot 4k plus or one up them and add a dual tuner.

 

[xsat]

so, this tells me that oscam/emu-arm4k 11590, juli build is not ok.

I have solved this latest OScam problem with your advice.
result,
Build: by. audi06_19 will stop in a few minutes,
Build By MOHAMED_OS worked correctly.

Thank you very much.:thum:

 

[ro_54]

I have solved this latest OScam problem with your advice.
result,
Build: by. audi06_19 will stop in a few minutes,
Build By MOHAMED_OS worked correctly.

Thank you very much.:thum:

You're welcome.
so, another case of non working juli build arm oscam-11590.
yes, i tested almost all builds for arm, and mo's is the only good one.

 

[iq180]

My whole point is i don't want a $50 receiver with a crappy remote. How about telling them to build something at least on par with a Dinobot 4k plus or one up them and add a dual tuner.

It all depends on what you want a receiver to do, do you have any idea what would happen if I let my wife get her hands on my Dreambox, it would not end well that I do know, been there and done that,LOL.

 

[Kb Cool]

How do you find the "channel Hash" in the debug log using Mohamed_os 11590 Oscam? I'm not seeing it.

 

[m35istan]

How do you find the "channel Hash" in the debug log using Mohamed_os 11590 Oscam? I'm not seeing it.

Debug Level 2