PGI v1.0, Kiryu for Ipbox 900 - 910

[mackoi71]

I get epic fail when i install this. Any knows what i do wrong?

 

[pipodekloon]

Hello

Try to unplug your harddrive.
boot it up and put off pvr settings.
reboot again with HD and format it.

GR

 

[mbd]

old db problem .try new scan.

 

[mackoi71]

It will not start so cant do scan. Tried to disconnect hard disk but getting same epic fail.

 

[mbd]

have u tried 2 reflash or do factory reset .

 

[RandomBoy]

I got black screen after installing 1.0 on Ipbox 910 HD

Im stuck where you select language / lnb at first boot.
I see the led on IPBOX change and i can press green button 3 times !!

Im not using HDMI, im using scart

I tried complete original CRI Image. and got same issue
Black screen .. And i see on led display select language

Using Uboot 1.33
strings /dev/mtd0 | grep "U-Boot 1.3"
(U-Boot 1.3.1 (Oct 24 2008 - 18:17:25) - stm23-2008-03-19

 

[RandomBoy]

When the TV SYSTEM (your TV type) does not match to the STB setting, TV screen and/or audio may not
show properly.
In that case, you need to switch off the STB, and press power button -> menu button and hold -> up/down
direction button-> OK on the front panel until you see your TV type.
If you can open and see the Main menu, you can adjust on the menu.
Caution: If you use some of HD modes (720por 1080i) SCART output is not functional.

Time to reinstall and test