PC Sat Card for Sharing
- Thread starter Maryq
- Start date
Server Headache
I reset the dm's everytime I make the slightest change the Cam's startup no problem. As I explained earlier this is crazy as the setup is very striaghtforward. I have checked and rechecked setting changing passwords IP's images network cables and even swapped the box's about all to no avail.
I reset the dm's everytime I make the slightest change the Cam's startup no problem. As I explained earlier this is crazy as the setup is very striaghtforward. I have checked and rechecked setting changing passwords IP's images network cables and even swapped the box's about all to no avail.
i just got a brand new one of these for a back up, all the netgear routers are pretty the same software inside firewall rules etc!
i will install snagit tomorrow and take some snap shots of the firwall rules and how to create a new rule for CCcam for you.
i will install snagit tomorrow and take some snap shots of the firwall rules and how to create a new rule for CCcam for you.
Log into you router and click on services then click on add service
Service Definiton
Name = CCcam
Type = TCP
Start Port = 12000
Finish Port = 12000
then click on apply
Firewall Rules
Leave Outbound Services as it is
Inbound Services you will see CCcam tick the box and choose edit
Service = CCcam(TCP:12000)
Action = Allow Always
Send to Lan Server = 192.168.0.? ip of the receiver
WAN User = Any
Log = Never
click on apply
you can use what ever port you like
just make sure the ip set in the dreambox is the same as the one in Inbound services
Service Definiton
Name = CCcam
Type = TCP
Start Port = 12000
Finish Port = 12000
then click on apply
Firewall Rules
Leave Outbound Services as it is
Inbound Services you will see CCcam tick the box and choose edit
Service = CCcam(TCP:12000)
Action = Allow Always
Send to Lan Server = 192.168.0.? ip of the receiver
WAN User = Any
Log = Never
click on apply
you can use what ever port you like
just make sure the ip set in the dreambox is the same as the one in Inbound services
I am using CCaminfo to check the functionality of server on the client it shows Server online but no client, when I Telnet the Server with the Red Line inserted it sees itself.
Client IP 192.168.0.51 Server 192.168.0.50
I am using nabilosat_v08_dm500s_maxvar_blue image on both DM500s.
Client Setting.
C: 192.168.0.50 12000 gold silver
Server Setting
F: gold silver 12000
C: 192.168.0.50 12000 gold silver
Why did you copy the C Line from the Client DM into your Server?
Brummie again thank you for you excellent response. However I am only trying to use the CS Server for internal use at home at present. The setting you sent, I suspect are primarily for an external client connection. I have virtually the exact same setting anyway and still no reponse.
You cannot put the same C Line in both Client DM and Server.
Remove the C Line from the Server and leave it only in the Client DM.
this is definatley 2 dreambox DM500's is the server reading your card ok check the entitlements h**p://192.168.0.?.:16001/entitlements and see if it detects the card and if its does add this to the F: line in the server
F: gold silver 3 0 0
leave the other box as it is with just the C: line and make sure there is no # in front of the C: in the client box config and the F: in the server box config
F: gold silver 3 0 0
leave the other box as it is with just the C: line and make sure there is no # in front of the C: in the client box config and the F: in the server box config
Server Headache
Brummie just wanted to let you know, problem sorted. Which I could not have sorted without your help your a star. The problem was the Mac Address's which were the same, dont ask me how but they were, I used a fix you had written earlier. Again many thanks for your patience. :clapping::clapping::clapping:
Brummie just wanted to let you know, problem sorted. Which I could not have sorted without your help your a star. The problem was the Mac Address's which were the same, dont ask me how but they were, I used a fix you had written earlier. Again many thanks for your patience. :clapping::clapping::clapping:
External Share Picture Freezing
Brummie, as I said previously everything working fine internally. Tried an external share with my sis which worked first time "surprise surprise". Problem is when on a decoded signal the picture is freezing quite frequently any suggestions.
Brummie, as I said previously everything working fine internally. Tried an external share with my sis which worked first time "surprise surprise". Problem is when on a decoded signal the picture is freezing quite frequently any suggestions.