OscamYmod49

[dog05]

I am using oscamYmod49 on DM7025. It 's all ok (digi * upc etc..) But on TNTSAT, the channel opens, but just a few seconds it stops. Can you help me understand why.
Thanks in advance for your help.
Greetings

 

[briosa]

It works well in TNT Sat, like the new 18t50. Maybe your problem is oscam.dvbapi...

 

[dog05]

Briosa, thank you for answering. I followed your advice I installed oscamYmod18-t50 and I have tried all the possible changes of dvbapi but the result does not change: the channels open but after a while they stop. And 'too much to ask you a more concrete help, maybe in pm, if this is not possible, I would be very grateful.
Hello

 

[briosa]

If you are using TSImage, last version, just instal from Menu/Softcams (Add) oscamymod 18.50 AND oscamymod.config... I think everything will be OK

 

[Calokay]

oscam.dvbapi:

# TNTSAT EMU (19.2E) (0500:030B00)

# delete these lines, when you don't use TNTSat EMU !!!

P: 0500:030B00:6F73 ; Cherie25
P: 0500:030B00:6F86 ; Cherie25
P: 0500:030B00:6F87 ; Cherie25
#I: 0500:030B00:4284:1789 ; NT1
P: 0500:030B00:4284:1788 ; NT1
#I: 0500:030B00:4290:1789 ; NT1
P: 0500:030B00:4290:1788 1 ; NT1
P: 0500:030B00:2013 :044C 1 ; TCM
P: 0500:030B00 ;
#**************

HD TNT don´t work in emu

 

[just4fun2]

Off course it work...Maybe your pb is another card or c line that make a black screen? Check if the oscam.keys is inside the etc/tuxbox/config
i have this dvbapi in my box & work 100%

I: 0500:022610 # C+ Fr/TPS/ABSAT (13E) (Via22610)
I: 1811
I: 1812
I: 1818
I: 1819
I: 1863
I: 181D
P: 0500:041950 # TNTSAT - cherie 25
P: 0500:030B00:6F86 # TNTSAT - cherie 25
P: 0500:030B00:6F87 # TNTSAT - cherie 25
P: 0500:030B00:2202 # TNTSAT - l'equipe tv
P: 0500:030B00:2216 # TNTSAT - l'equipe tv
P: 0500:030B00:2136 # TNTSAT - numero 23
P: 0500:030B00:217C # TNTSAT - numero 23
P: 0500:030B00 # TNTSAT

 

[dog05]

Thank you all for availability. I've tried all your suggestions but the result does not change, the channels open but after about 15/20 seconds to stop. Use an image oozoon in the dream. The block could be a configuration problem? I do not know where to turn. I hope for your help maybe pm.
Greetings to all

 

[dog05]

Just4fun2, I do not have a black screen. The channels are all open, except that after a while they stop. I would like you to see the file oscam.log, how can I post it.
Hello

 

[briosa]

Try to use only oscam.keys-oscam.conf-oscam.dvbapi-oscam.server and ocam.user and delete the other files...

 

[dog05]

Briosa, I did as you suggested: the channels open but after a few seconds they stop. This happens only on TNT. I attach the dvbapi.
Hello
# TNTSAT EMU (19.2E) (0500:030B00)
#
P: 0500:030B00:6F73 ; Cherie25
P: 0500:030B00:6F86 ; Cherie25
P: 0500:030B00:6F87 ; Cherie25
I: 0500:030B00:2206:0443 ; TF1
P: 0500:030B00:2206:043E ; TF1
I: 0500:030B00:221A:0443 ; TF1
P: 0500:030B00:221A:043E ; TF1
I: 0500:030B00:2202:02B3 ; M6
P: 0500:030B00:2202:02AE ; M6
I: 0500:030B00:2216:02B3 ; M6
P: 0500:030B00:2216:02AE ; M6
I: 0500:030B00:2218:037B ; W9
P: 0500:030B00:2218:0376 ; W9
I: 0500:030B00:2204:037B ; W9
P: 0500:030B00:2204:0376 ; W9
I: 0500:030B00:2013:04A8 ; TMC
P: 0500:030B00:2013:04A9 ; TMC
I: 0500:030B00:2027:04A8 ; TMC
P: 0500:030B00:2027:04A9 ; TMC
I: 0500:030B00:2011:03E0 ; FRANCE 2
P: 0500:030B00:2011:03DA ; FRANCE 2
I: 0500:030B00:2025:03E0 ; FRANCE 2
P: 0500:030B00:2025:03DA ; FRANCE 2
I: 0500:030B00:2024:037C ; FRANCE 3
P: 0500:030B00:2024:0379 ; FRANCE 3
I: 0500:030B00:2010:037C ; FRANCE 3
P: 0500:030B00:2010:0379 ; FRANCE 3
I: 0500:030B00:2213:0188 ; FRANCE 4
P: 0500:030B00:2213:0185 ; FRANCE 4
I: 0500:030B00:21FF:0188 ; FRANCE 4
P: 0500:030B00:21FF:0185 ; FRANCE 4
I: 0500:030B00:2214:01EC ; FRANCE 5
P: 0500:030B00:2214:01E9 ; FRANCE 5
I: 0500:030B00:2200:01EC ; FRANCE 5
P: 0500:030B00:2200:01E9 ; FRANCE 5
I: 0500:030B00:21FE:0124 ; FRANCE O
P: 0500:030B00:21FE:0121 ; FRANCE O
I: 0500:030B00:2212:0124 ; France O
P: 0500:030B00:2212:0121 ; France O
I: 0500:030B00:2219:03E0 ; GULLI
P: 0500:030B00:2219:03DE ; GULLI
I: 0500:030B00:2205:03E0 ; GULLI
P: 0500:030B00:2205:03DE ; GULLI
I: 0500:030B00:4284:1789 ; NT1
P: 0500:030B00:4284:1788 ; NT1
I: 0500:030B00:4290:1789 ; NT1
P: 0500:030B00:4290:1788 ; NT1
I: 0500:030B00:2211:00C0 ; D8
P: 0500:030B00:2211:00BA ; D8
I: 0500:030B00:21FD:0022 ; D8
P: 0500:030B00:21FD:00BA ; D8
I: 0500:030B00:200E:02B4 ; NRJ 12
P: 0500:030B00:200E:02AE ; NRJ 12
I: 0500:030B00:2022:02B4 ; NRJ 12
P: 0500:030B00:2022:02AE ; NRJ 12
I: 0500:030B00:275F:0FEF ; RMC Decouverte
P: 0500:030B00:275F:0FEA ; RMC Decouverte
I: 0500:030B00:2761:0FEF ; RMC Decouverte
P: 0500:030B00:2761:0FEA ; RMC Decouverte
I: 0500:030B00:2136:19E2 ; NUMERO 23
P: 0500:030B00:2136:19DC ; NUMERO 23
I: 0500:030B00:217C:19E2 ; NUMERO 23
P: 0500:030B00:217C:19DC ; NUMERO 23
P: 0500:030B00:189F ; L EQUIPE 21
P: 0500:030B00:18B3 ; L EQUIPE 21
#
I: 0500:030B00:25E5:1975 ; F3 PICARDIE
P: 0500:030B00:25E5:196E ; F3 PICARDIE
I: 0500:030B00:25E6:19E3 ; F3 FRANCHE COMTE
P: 0500:030B00:25E6:19DC ; F3 FRANCHE COMTE
I: 0500:030B00:25E7:1989 ; F3 AQUITAINE
P: 0500:030B00:25E7:1982 ; F3 AQUITAINE
I: 0500:030B00:2649:1975 ; F3 BNORMANDIE
P: 0500:030B00:2649:196E ; F3 BNORMANDIE
I: 0500:030B00:25E9:199D ; F3 AUVERGNE
P: 0500:030B00:25E9:1996 ; F3 AUVERGNE
I: 0500:030B00:264D:199D ; F3 BOURGOGNE
P: 0500:030B00:264D:1996 ; F3 BOURGOGNE
I: 0500:030B00:2650:1A1F ; F3 ALPES
P: 0500:030B00:2650:1A18 ; F3 ALPES
I: 0500:030B00:2651:19C5 ; F3 NORD PDC
P: 0500:030B00:2651:19BE ; F3 NORD PDC
I: 0500:030B00:25ED:19C5 ; F3 LIMOUSIN
P: 0500:030B00:25ED:19BE ; F3 LIMOUSIN
I: 0500:030B00:25EE:1A3D ; F3 RHONE ALPES
P: 0500:030B00:25EE:1A36 ; F3 RHONE ALPES
I: 0500:030B00:25EF:1AAB ; F3 PROV ALPES
P: 0500:030B00:25EF:1AA4 ; F3 PROV ALPES
I: 0500:030B00:2653:1AAB ; F3 LANGUEDOCROU
P: 0500:030B00:2653:1AA4 ; F3 LANGUEDOCROU
I: 0500:030B00:25E8:19F7 ; F3 LORRAINE
P: 0500:030B00:25E8:19F0 ; F3 LORRAINE
I: 0500:030B00:264A:19E3 ; F3 PAYS DE LOIRE
P: 0500:030B00:264A:19DC ; F3 PAYS DE LOIRE
I: 0500:030B00:264B:1989 ; F3 COTE D'AZUR
P: 0500:030B00:264B:1982 ; F3 COTE D'AZUR
I: 0500:030B00:264C:19F7 ; F3 CENTRE
P: 0500:030B00:264C:19F0 ; F3 CENTRE
I: 0500:030B00:25EA:1A0B ; F3 PARIS IDF
P: 0500:030B00:25EA:1A04 ; F3 PARIS IDF
I: 0500:030B00:264E:1A0B ; F3 POITOUCHAR
P: 0500:030B00:264E:1A04 ; F3 POITOUCHAR
I: 0500:030B00:264F:19B0 ; F3 CHAMP ARDENNE
P: 0500:030B00:264F:19AA ; F3 CHAMP ARDENNE
I: 0500:030B00:25EB:19B1 ; F3 BRETAGNE
P: 0500:030B00:25EB:19AA ; F3 BRETAGNE
I: 0500:030B00:25EC:1A1F ; F3 HNORMANDIE
P: 0500:030B00:25EC:1A18 ; F3 HNORMANDIE
I: 0500:030B00:2652:1A3D ; F3 ALSACE
P: 0500:030B00:2652:1A36 ; F3 ALSACE
I: 0500:030B00:25F0:1A51 ; F3 MIDI PYRENEES
P: 0500:030B00:25F0:1A4A ; F3 MIDI PYRENEES
I: 0500:030B00:2654:1A51 ; F3 CORSEVIASTELL
P: 0500:030B00:2654:1A4A ; F3 CORSEVIASTELL
#
P: 0500:030B00:1FAD ; PARIS PREMIERE (some hours only)
#
I: 0500:030B00 # ignore 030B00 on all other channels

 

[andres66]

I have his OScam-ymod startLOG :

.............
2013/12/21 16:07:47 1850 2C4D54B0 p proxy thread started (thread=2C4D54B0, label=constant_cw, server=/etc/tuxbox/config/oscam.keys)
..............
2013/12/21 16:07:47 1850 2C4D54B0 p local reader: constant_cw (file: /etc/tuxbox/config/oscam.keys) constant cw
................

First - remove your oscam.server file ( or delete this label) , restart Ymod and try again.
You don't need this "label= constant_cw" what is connected to oscam.keys file.

For OSCam-ymod file oscam.keys is placed in same folder, where your other Ymod configfiles are.
----------------------
When you for some reason need to use constantCW with Ymod, don't use oscam.keys file for this.
example:

[reader]
label = constant_cw
enable = 1
protocol = constcw
device = /etc/tuxbox/config/oscam.constant.cw # default folder for oscam configfiles
#device = /etc/tuxbox/config/oscam-ymod/oscam.constant.cw # .. or my configfiles are in this folder
group = 1
audisabled = 1

Here my constantCW file name is: oscam.constant.cw

 

[dog05]

Andress, I did as you say, I left it in the folder / config / files only or-conf or-keys, or dvbapi and-or-user. The channels open but then it all crashes. Because this problem occurs only with tnt and not with other encodings, you wonder if this may depend on the oscam (1.20.7286) or from the image (oozoon oe1.6) or must match oscam to cccam2.30.
As you can see I do not know what to do to fix the problem.
I hope you have some idea to solve.
Still I give you thanks for your time
Hello