Oscam Mod :DOScam - (by depp0ns )with emu ONLY CHAT NO FILES
Yes I have done it this way, but the same works for oscam.keys oscam in ymod 18-t51 in the same format flawlessly, but for Doscam v.019 does not work at all in BISS.:mecry:
Moreover provider in emu work of oscam.keys fuss just for oscam ymod, also for the Doscam v. 019 BISS in earlier versions of the Doscam v. 017 goes in the older format without problems.Where does read BISS keys the Doscam v. 019?
Last edited:
- Messages
- 5,239
I do not have information that ecm DosCam v19 also, why do restart doscam encrypted emu all channels screen black proplem
Code:
[COLOR="Blue"]caid: 0x0500
pid: 0x03DE
prov: 0x030B00
reader: keyfile
from: /var/keys/oscam.keys
protocol: constcw
hops: 0
ecm time: 0.056
cw0: 26 A6 41 0D 96 24 B7 71
cw1: 79 9F 10 28 A6 79 48 67[/COLOR]correct
F onid sid vpid 00 XXXXXXXXXXXXXXXX
key in SoftCam.Key
........
and.....
in doscam.cfg
[reader]
label = emureader
protocol = constcw
device = /var/keys/SoftCam.Key
#caid = 0100,0500,0600,1800,0D00,2600,4A00,FF00,090F,093E,002600
group = 1,2,3
BISS in Doscam v.019 DON´T WORK = BUG !!!!!!!!!!!!!!:nana:
do not allow more than give misleading messages!!!
If you are unable not to say that does not work, because it works perfectly.
I would never dare lie!!!
I tested several config where no problem going all providers except emu BISS. With the same shape:
"F ONID SID VPID 00 XXXXXXXXXX XXXXXX"
comes oscam ymod (later versions), so there is a mistake. Since it is not only in BISS Doscam V. 019, it must be a mistake in the config or in the emulator Doscam V. 019
If you also operates in BISS and post config, as published on the above it is not no way in BISS.
vijaypraabhu
Registered
- Messages
- 6
nice
Yes, BISS working. Four hex digits for each onid, four for each sid and four for each vpid, without spaces and two lines key row, one for key 00 and other for key 01.
F 00010004003A 00 XXXXXXXXXXXXXXXX
F 00010004003A 01 XXXXXXXXXXXXXXXX
Thank you very much. The problem was that no one has so far not written clearly, there must be a second line "01"
F 00010004003A 01 XXXXXXXXXXXXXXXX
, which for a new oscamymod is not necessary, just the first line of "00" F 00010004003A 00 XXXXXXXXXXXXXXXX
lie are you please.....
and no space "F ONID SID VPID 00 XXXXXXXXXX XXXXXX"
but correct has to be
F onid sid vpid 00 XXXXXXXXXXXXXXXX
(for key 00 )
so I have to ban you for offenses against the moderation of the forum (you gave me a liar), and for dissemination of false and misleading.
or to apologize and make amends for your reckless words?
- Messages
- 5,239
Doscam v019 tested work fine...:thum:
TNTSat(19E)
AustriaSat(19E)
ORF Digital(19E)
SRG SSR Swiss(13E)
All BISS Keys OK
They need to work with this key file:
http://www.sat-universe.com/showthread.php?t=200363&page=24
TNTSat(19E)
AustriaSat(19E)
ORF Digital(19E)
SRG SSR Swiss(13E)
All BISS Keys OK
Code:
[COLOR="Purple"]BISS Format(ex):[/COLOR]
[COLOR="blue"]ONID[/COLOR] [COLOR="Red"]SID[/COLOR] [COLOR="green"]VPID[/COLOR]
[COLOR="Blue"]00B0[/COLOR][COLOR="Red"]0003[/COLOR][COLOR="Green"]0028[/COLOR] 00 XXXXXXXXXXXXXXXX ;Al Aoula(13E)
[COLOR="Blue"]00B0[/COLOR][COLOR="Red"]0003[/COLOR][COLOR="Green"]0028[/COLOR] 01 XXXXXXXXXXXXXXXX ;Al Aoula(13E)They need to work with this key file:
http://www.sat-universe.com/showthread.php?t=200363&page=24
Last edited:
I apologize , just for the fact that my English is not at a sufficient level . So definitely there was a miscommunication and understanding from both sides .
I relied on the text :
- Neues BISS - Format ( ONID VPID sid ) , z.B.
" F onidsidvpid 00 XXXXXXXXXX XXXXXX "
http://www.sat-universe.com/showthread.php?t=265656
There is not the least mention that there should be a second line:
" F onidsidvpid 01 XXXXXXXXXX XXXXXX "
The problem was that no one previously did not write clearly , there must be a second line " 01 " , which for the new oscam ymod is not needed , just the first line of " 00 "
# Correct OSCam - ymod BISS is -
# " F [ SID ] [ videoPID ] *************** 00 " * ; "
# " F [ SID ] [ videoPID ] **************** 01 ;
# or
# " F [ ONID ] [ SID ] [ videoPID ] **************** 00 ; "
When I learned this fact the necessity of the second line :
" F onidsidvpid 01 XXXXXXXXXX XXXXXX "
for proper functioning , so I thanked him .
I can only apologize for the fact that the contributor did not complete information :
- Neues BISS - Format ( ONID VPID sid ) , z.B.
" F onidsidvpid 00 XXXXXXXXXX XXXXXX "
http://www.sat-universe.com/showthread.php?t=265656
*and I proceeded on the basis that it is the same format as used for oscam ymod. So I concluded that this is a bug in the section for BISS. Basically it was about inconsistently written instructions and the resulting misunderstandings.
To the moderator, I did not, and nor do I have any reservations, and even I did not want to offend him. If this is understood, so he apologize for this misunderstanding.
Not listed on a personal level, but technically, so sorry for the misunderstanding.
Last edited:
kanetaker2010
Registered
- Messages
- 37
F [ SID ] [ videoPID ] *************** 00 then it is the correct form true?, and when i'm putting the caid and provider would be 2600:000000?
by example: F 000707d7 *************** 00 caid 2600 and provider 000000
by example: F 000707d7 *************** 00 caid 2600 and provider 000000
- Messages
- 5,239
Doscam v019 EBU 2600 (BISS)
Code:
[COLOR="Purple"][B]BISS Format(ex):[/B][/COLOR]
[COLOR="blue"]ONID[/COLOR] [COLOR="Red"]SID[/COLOR] [COLOR="green"]VPID[/COLOR]
[COLOR="Blue"]00B0[/COLOR][COLOR="Red"]0003[/COLOR][COLOR="Green"]0028[/COLOR] 00 XXXXXXXXXXXXXXXX ;Al Aoula(13E)
[COLOR="Blue"]00B0[/COLOR][COLOR="Red"]0003[/COLOR][COLOR="Green"]0028[/COLOR] 01 XXXXXXXXXXXXXXXX ;Al Aoula(13E)kanetaker2010
Registered
- Messages
- 37
the onid is always the same for the all biss format? i understand that the sid and vpid are diferent but i don't know about the onid.
ONID is different.
This information is Main menu of your satellite receiver in the Service info, or Reference in the program.
kanetaker2010
Registered
- Messages
- 37
i can't watch this information on my ferguson ariva 150, maybe in other boxes.