Oscam Mipsel (DM500HD,800,7025,8000 & VU)

[vadiaravolk]

EMU Trikolor 36E

oscam.server - leave empty.
It on ID 4AE1 - the automatic device gives the answer.
And still - AU while is not present.

oscam.linux_x64.tar.gz
oscam.linux_x32.tar.gz
oscam.dm800.tar.gz
oscam.dm500.tar.gz
oscam.cygwin

 

[powercisco]

21.01.2013 Oscam1.20 svn8142

- Changeset [8142] by gf
Revert "config/reader: Remove obsolete settings (cooldowndelay, cooldowntime)."
This reverts commit r8128. Apparantly they are used althou undocumented.
- Changeset [8141] by theparasol
Tryfix2 CCcam timeouts tnx to basta2k
*Squashed a little bug
*Update timers only on ecm and emm messages
But still closed idle cccam readers are suddenly awaked again.
One source is emm update (but I think thats fine)
If you find another source plz report!

thanks LePouSAT

 

[powercisco]

Oscam1.20 svn8171

- Changeset [8171] by gf
config/reader: Refactor parsing of "cooldown" and related settings.
Preparation for reader config conversion.

thanks LePouSAT

 

[powercisco]

Oscam1.20 svn8218

- Changeset [8218] by Admin
Newcamd: Fix inactivitytimeout being interpreted wrong as a value in minutes instead of seconds. Thanks to manu

thanks LePouSAT

 

[powercisco]

30.01.2013 Oscam1.20 svn8238

- Changeset [8238] by gf
Remove dead code.
- Changeset [8237] by gf
webif: Prevent crash due to race in setting cwlastresptimes_last variable.
Thanks for malakudi for finding the bug.
- Changeset [8236] by depp0n
oscam-config-reader.c:
*changed default value for cool_timeout_init to 0 which means oscam uses the calculated value from atr
*changed default value for cool_timeout_after_init to 0 which means oscam uses the calculated value from atr
protocol_t0.c:
*fixed receive timeout which got mixed-up in r8136

thanks LePouSAT

 

[powercisco]

Oscam1.20 svn8246

- Changeset [8246] by gf
Add griffin CAS reader.

thanks LePouSAT

 

[powercisco]

03.02.2013 Oscam1.20 svn8262

- Changeset [8262] by gf
ecm: Remove check for previously unsupported nanos.
As now we can decrypt the providers 3311 and 3315 (that have ECM with
Nano 01) via a remote server, we must remove or comment the code
introduced in r6439.
Patch by today, posted in ticket #3125.
- Changeset [8261] by gf
logging: Log pid when using syslog. When more than one oscam is run, it is impossible to differentiate
syslog messages without using the pid.
- Changeset [8260] by gf
bulcrypt: Use reader->client as client when reloading card info.
reader->client is really cur_client() in that case but using
reader->client is the way videoguard reader calls add_job() and
also we don't need to include oscam-client.h in bulcrypt reader.
- Changeset [8259] by gf
Convert actions from defines to enum.
- Changeset [8258] by gf
Move threaded work funcs in oscam-work.{c,h}

thanks LePouSAT

 

[powercisco]

06.02.2013 Oscam1.20 svn8303

- Changeset [8303] by gf
monitor: Do not look for monitor clients when monitor is not compiled in
write_to_log() tries to find monitor clients even if monitor module
is not compiled in. There is no need to do that.
Patch by malakudi posted in ticket #3137.
- Changeset [8302] by gf
doc: Try to make description of "logduplicatelines" less confusing.
As the variable name says "logduplicatelines" enables logging
of duplicate lines in the log when this variable is set to 1.
By default the variable is set to 0 - duplicate lines are
not logged.
- Changeset [8301] by docman
Update for 'logduplicatelines' documentation.
- Changeset [8300] by gf
griffin: Implement better ATR checking. Previous checks were wrong and they worked only by chance.

thanks LePouSAT

 

[powercisco]

Oscam1.20 svn8340

- Changeset [8340] by gf
build: Use -pipe compiler parameter. On my machine this speeds up the build ~5%.

thanks LePouSAT

 

[powercisco]

14.02.2013 Oscam1.20 svn8348

- Changeset [8348] by theparasol
Fix for using ratelimit with dvbapi and no dvbapi user configured

thanks LePouSAT

 

[powercisco]

16.02.2013 Oscam1.20 svn8357

- Changeset [8357] by stefansat
Removed the hard targetting off PCSC header location. I left the the optional_include dir option but it's not needed anymore.
for crosscompile do not forget to ad
SET(CMAKE_FIND_ROOT_PATH <target systems root pat> )
To you're toolchain.cmake file used
This patche solves the poisoning use off local PCSC headers instead of those for the target system in case of crosscompile.

thanks LePouSAT

 

[powercisco]

19.02.2013 Oscam1.20 svn8374

- Changeset [8374] by gf
camd35/ecm: Fix memory leak. camd35 allocates ecm->src_data in camd35_process_ecm() and frees it
in camd35_send_dcw() but if camd35_send_dcw() is never called (due
to error in ECM processing for example) the memory was leaked.
Thanks to Gorgone for reporting the bug.
- Changeset [8373] by gf
gbox: Fix initialization bug.
Solution suggested by Eggy123.

thanks LePouSAT

 

[powercisco]

21.02.2013 Oscam1.20 svn8393

- Changeset [8393] by gf
webif: Remove a rather clever way of checking if favicon.ico was changed.
This mechanism will break once module-webif-pages.c start to
be generated which is being worked on in the moment.

thanks LePouSAT

 

[powercisco]

22.02.2013 Oscam1.20 svn8406

- Changeset [8406] by gf
webif: Make CSS, JSCRIPT and TOUCH_xxx a proper templates.
Now we have only one way of dealing with resources - everything
is in templates array. We can use /savetemplates.html to extract
CSS, JSCRIPT, etc, we can replace those as any other template and
so on.
The road to generating module-webif-pages.c from the build system
is open.
- Changeset [8405] by gf
webif: Init CSS and JSCRIPT resources using defines.
This is preparation for declaring CSS, JSCRIPT and TOUCH related
resources as proper templates.

thanks LePouSAT

 

[powercisco]

Oscam1.20 svn8416

- Changeset [8416] by gf
cscrypt: Do not include sha1.h twice.
- Changeset [8415] by TNe-TWo
fix cwcycle wiki links

thanks LePouSAT

 

[powercisco]

01.03.2013 Oscam1.20 svn8450

- Changeset [8450] by gf
readers: Free configured readers on exit. Make valgrind a little bit happier.
- Changeset [8449] by gf
readers: Do not leak entitlements on card change and reader freeing.
Reader entitlements are leaken when card is changed. Probably nobody
noticed because changing cards is not an event that happen often.
- Changeset [8448] by gf
log: Free log history on exit. Make valgrind a little bit happier.
- Changeset [8447] by gf
gc: Add static declarations where needed.
- Changeset [8446] by gf
webif: Compress built-in templates. Use the minilzo code that we already have to compress the built-in templates.
This saves ~90k binary size on 32bit defconfig. As the tool reports:
Compressed 148820 template bytes into 51619 bytes. 97201 saved bytes (65.31%).
The old code that works with non-compressed templates is still here,
to use it, comment #define USE_COMPRESSION 1 in webif/pages_gen.c
and recompile.
Once we establish that template compression works fine the old
code can be removed.
This commit introduces no user visible changes.
- Changeset [8445] by gf
webif: Do not store images in templates array as base64. Save a little bit of binary size.
This commit introduces no user visible changes.

thanks LePouSAT

 

[powercisco]

Oscam1.20 svn8457

- Changeset [8457] by gf
newcamd: Add paranoid checks for per port newcamd data.
Better safe than sorry.
- Changeset [8456] by gf
Slim down struct s_port.
struct s_port contains filter array and couple of other fields that are
used only for newcamd and nothing else. They waste more than 2k in common
case.
To stop losing this much space, create private structure only for
newcamd fields and allocate it dynamically. This lowers struct s_port
size a lot and of course struct s_ptab even more because it contains
array of struct s_ports's.
New structure sizes (32-bit):
before after
struct s_port 2144 12
struct s_ptab 68612 388
struct s_config 141260 4812
Size report (32-bit):
text data bss dec hex filename
998222 1944 602344 1602510 1873ce before/oscam-1.20-unstable_svn8453-i486-slackware-linux
998174 1944 61800 1061918 10341e after/oscam-1.20-unstable_svn8453-i486-slackware-linux
bloat-o-meter report (32-bit):
add/remove: 0/1 grow/shrink: 13/16 up/down: 7897/-548383 (-540486)
function old new delta
modules 1840 9520 +7680
...
cfg 141260 4812 -136448
static.ptab 411672 - -411672
- Changeset [8455] by gf
Make ptab in struct s_module embedded not a pointer.
This blows up bss (static) memory nearly twice but we'll get that
back and lots more once we slim down struct s_port in the next
commit.

thanks LePouSAT

 

[powercisco]

08.03.2012 Oscam1.20 svn8510

- Changeset [8510] by gf
nagra: Fix regression introduced in r8486. Converting to private data in commit r8486 missed the fact the there
is a case where private data is needed before it is initialized. This
happens with irdeto cards in nagra mode.
Thanks to mechi for testing and the report.

thanks LePouSAT

 

[powercisco]

11.03.2012 Oscam1.20 svn8532

- Changeset [8532] by gf
webif: Stop http server thread realiably on exit.

thanks LePouSAT

 

[powercisco]

Oscam1.20 svn8538

- Changeset [8538] by gf
webif+cccam: add missing serverip setting.
All network facing modules support serverip setting except cccam
and webif. They used only the global serverip. That patch adds support
for serverip setting in [cccam] and [webif] sections.
Patch by manu posted in ticket #3235.
- Changeset [8537] by stefansat
Modified CMakeLists.txt to use Flags It's not finished yet, but here the reworked file .
LIBCRYPTO,LIBUSB,PCSC are already adapted

thanks LePouSAT