oscam for powervu - azbox premium openrsi 3.0

K

Kb Cool

Member
Messages
61
Ok i never used rsi and i no longer have the AZbox to test. So i'll have to take your word for it.
Thanks
 
L

leo_os66

Registered
Messages
16
Thanks a lot for the replies

I'll try as soon as possibile and I'll tell you if everything is ok

Thanks again
 
L

leo_os66

Registered
Messages
16
Hello

I tried to install oscam file without success.
I put all files and gave "777" to all and using blue button I can see "oscam" on the decoder

Using TS Panel I cannot see Oscam but only "oscam ymod": I have oscam ymod install as well

I also created the directory "var/keys" and put oscam.keys under it as I couldn't see any oscam.keys file (is it correct ?)

After the installation I noticed that I noticed some problems on the azbox (it restarted a few times because of internal errors). So I prefered to re-istall the firmaware OpenRSI3.0
Now I just have oscam ymod (it works fine as before)
Note that oscam ymode worked well even if I had oscam installed as well

I did something wrong ?
Maybe oscam ymode and oscam could not be installed at the same time ?
note: I also run the commend "oscam" from telnet and I saw a few errors from there - some examples:
couldn't find under tuxbox/config file oscam.srvid ..
couldn't fime var/keys ...

Do you have any idea / hints ?

Thanks
 
G

georgeflu

Senior Member
Messages
485
maybe our conversation has no meaning,because today i found a few time and i tested it meticulously in my azbox (elite) installing the openrsi image. oscam emu works like emu in all available channels,except powervu (maybe drivers or enigma missing)maybe openatv,or pbnigma has the missing things
but just for the history (it should work for example srg...)

leo_os66 said:
Hello

I tried to install oscam file without success.
I put all files and gave "777" to all and using blue button I can see "oscam" on the decoder

Using TS Panel I cannot see Oscam but only "oscam ymod": I have oscam ymod install as well


Thanks
Click to expand...

oscam ymod and oscam emu can be the same time installed.
where and how did you installed them?folder by folder and (as i wrote above) atr 755.
also the oscam emu need a "softcam.key" file in "etc/tuxbox/config/oscam" directory (you can change that in "oscam.server" file.
the reason that you can see the one in image softcam manager and the other through ts panel,is that you downloaded the ymod from ts panel,builded to be controled from ts panel.

leo_os66 said:
After the installation I noticed that I noticed some problems on the azbox (it restarted a few times because of internal errors). So I prefered to re-istall the firmaware OpenRSI3.0
Now I just have oscam ymod (it works fine as before)
Note that oscam ymode worked well even if I had oscam installed as well

I did something wrong ?
Maybe oscam ymode and oscam could not be installed at the same time ?
note: I also run the commend "oscam" from telnet and I saw a few errors from there - some examples:
couldn't find under tuxbox/config file oscam.srvid ..
couldn't fime var/keys ...

Do you have any idea / hints ?

Thanks
Click to expand...
if you did something wrong... we should have a crashlog to read what is going wrong.
 
K

Kb Cool

Member
Messages
61
He can re-name oscam emu to the ymod that was downloaded in tspanel. And ftp it to bin and it'll overwrite it and now emu can be started with tspanel. Possibly!
 
S

sup26

Registered
Messages
2
METHOD TO WATCH POWERVU CHANNELS ON ENIGMA 2 WITH OSCAM EMU - IMRAN - 05-24-2016

METHOD TO WATCH POWERVU CHANNELS ON ENIGMA2 WITH OSCAM EMU v1.1


Enigma 2 Receivers Like Dreambox DM800HD PVR, DM800se, DM800se V2 ,Vu+ ect...

Oscam Emu support opening of PowerVu channels in Enigma2 (without Stream Relay method). Now you just have to copy oscam emu bin file and config files along with keys in the Softcam file to respective folders in Enigma2 of your Dreambox receiver and then you are ready to go to watch PowerVu channels (without any need to create IPTV bouquet as in the old “Stream Relay” method).

How to:
1.Install Oscam from online server of your installed image.
2.Download “Oscam Emu Patched” package from the provided link.
3.Extract files from the rar package and by using any ftp utility (like DCC or Filezilla) copy and replace
the respective folders in Enigma2 image.

Oscam Emu Patched v11086 for Dreambox DM800HD/DM800HD SE OE2.0 Enigma2 Images

Mega Link:
https://mega.nz/#!q4xynKrS!XXBQ-ntzaL4Vp9KD7PEwyxwPOUw8OdQNHUidbFNndSM

4shared Link:
http://www.4shared.com/rar/lxu-VlXJce/Oscam_Emu_Patched_v11086_Mips-.html

File Paths:
*oscam: /usr/bin
*oscam config files: /etc/tuxbox/config/oscam
*softcam.key : /etc/tuxbox/config/oscam

Note:
•File paths shown below are for OpenPLi image (check yourself for other images and place accordingly).
•Keys included in softcam file are only for Asisat 7 (105.5 East) powervu channels. For other channels, add your keys in the softcam file as per format.

OR if anybody wants latest updated softcam.key file for all powervu channels,please send me their email address.then i will send it to you.

Keys:
Keys are put into SoftCam.Key, which should be placed inside folder (/etc/tuxbox/config/oscam).


Key format in SoftCam.Key:

P <srvid> <nb> <key>

Example:

P 1234 01 11223344556677

AU keys:

P <srvid> <UA> <key>

Example:

P 1234 11223344 11223344556677

Important:
For keys Service ID (SID) must be in hex format. If Service ID start with 0, delete it and write it at end of Service ID (for 0A28 put A280,for 1234 put 2341, for 5678 put 6785).

I have personally tested on My DM800se & DM800 HD PVR.Every Powervu channels are opening very fast like FTA.
 
R

rodolfosat

Registered
Messages
1
sup26 said:
METHOD TO WATCH POWERVU CHANNELS ON ENIGMA 2 WITH OSCAM EMU - IMRAN - 05-24-2016

METHOD TO WATCH POWERVU CHANNELS ON ENIGMA2 WITH OSCAM EMU v1.1


Enigma 2 Receivers Like Dreambox DM800HD PVR, DM800se, DM800se V2 ,Vu+ ect...

Oscam Emu support opening of PowerVu channels in Enigma2 (without Stream Relay method). Now you just have to copy oscam emu bin file and config files along with keys in the Softcam file to respective folders in Enigma2 of your Dreambox receiver and then you are ready to go to watch PowerVu channels (without any need to create IPTV bouquet as in the old “Stream Relay” method).

How to:
1.Install Oscam from online server of your installed image.
2.Download “Oscam Emu Patched” package from the provided link.
3.Extract files from the rar package and by using any ftp utility (like DCC or Filezilla) copy and replace
the respective folders in Enigma2 image.

Oscam Emu Patched v11086 for Dreambox DM800HD/DM800HD SE OE2.0 Enigma2 Images

Mega Link:
https://mega.nz/#!q4xynKrS!XXBQ-ntzaL4Vp9KD7PEwyxwPOUw8OdQNHUidbFNndSM

4shared Link:
http://www.4shared.com/rar/lxu-VlXJce/Oscam_Emu_Patched_v11086_Mips-.html

File Paths:
*oscam: /usr/bin
*oscam config files: /etc/tuxbox/config/oscam
*softcam.key : /etc/tuxbox/config/oscam

Note:
•File paths shown below are for OpenPLi image (check yourself for other images and place accordingly).
•Keys included in softcam file are only for Asisat 7 (105.5 East) powervu channels. For other channels, add your keys in the softcam file as per format.

OR if anybody wants latest updated softcam.key file for all powervu channels,please send me their email address.then i will send it to you.

Keys:
Keys are put into SoftCam.Key, which should be placed inside folder (/etc/tuxbox/config/oscam).


Key format in SoftCam.Key:

P <srvid> <nb> <key>

Example:

P 1234 01 11223344556677

AU keys:

P <srvid> <UA> <key>

Example:

P 1234 11223344 11223344556677

Important:
For keys Service ID (SID) must be in hex format. If Service ID start with 0, delete it and write it at end of Service ID (for 0A28 put A280,for 1234 put 2341, for 5678 put 6785).

I have personally tested on My DM800se & DM800 HD PVR.Every Powervu channels are opening very fast like FTA.
Click to expand...

This method non works for the boxes Azbox because stream relay is necessary.:mad:
 
You must log in or register to reply here.
Top