Oscam for Cuberevo 9000?

[dreamnu]

ok, there is many oscam out there but who of all this can i use?

if i use dgs,sifteams or nlb firms in mine flash, who i too what?
if i use enigma 2 in mine flash, who i too what?

in the latest full-Distribution as is 3900 http://www.sat-universe.com/showthread.php?t=157303&page=230
there is a file as sh4-amino, is this for enigma ore dgs?

i also find some has the name SH4-DVBAPI, is this for enigma ore dgs?
and the lates of this file i found is oscam-svn4123-SH4-DVBAPI-DEFAULT-WEBIF.tar.gz on http://www.sat-universe.com/showthread.php?t=157303&page=240

is there none newer for sh4 dgs and enigma2?

ok, i have try 4029 sh4 in latest pkt flash but don´t get it to work 100.
mabe it is mine config that is wrong.
i test it on xxx.dns config, on cold reboot it dont find it, restart the emu and it find it.
Loking at canal digital ex. canal+ Drama and later swith to viasat tv1000 it works if i don´t looking as long time on 0.8, if i look 20min and then swith to 4.8 it do´n work.

########## oscam.server ###########

[reader]
label = newcamd
protocol = newcamd
key = 0102030405060708091011121314
device = xxxx.dns,18000,18001
account = xxxx,xxxxx
group = 1,2

[reader]
label = newcamd-reader2
protocol = newcamd
key = 0102030405060708091011121314
device = xxxx.dns,16000,16000
account = xxxx,xxxxx
group = 1,2
caid = 0B00,090F

[reader]
label = newcamd-reader3
protocol = newcamd
key = 0102030405060708091011121314
device = xxxx.dns,17001,17001
account = xxxx,xxxxx
group = 1,2
caid = 090F,0B00


oscam.conf

[dvbapi]
enabled=1
# boxtype: dbox2|dreambox|ufs910|ipbox
boxtype=dbox2
user=user
au=1


oscam.dvbapi

########## oscam.dvbapi ###########
[dvbapi]
# caid #
P: 0B00
P: 090F
P: 1830

all files are 755

ok i have 1830 that i can remove, allso i don´t tray to change boxtype to ipbox, can it bee that as problem?

//dreamnu

 

[dreamnu]

[EDIT mine text] ok, there are many oscam versions out there, but which of them can I use?

If I use DGS, SifTeams or NLB in my flash memory, which of them can I use?

If I use Enigma2 in flash memory, which of them can I use?

in the last entire distribution that is 3900 http://www.sat-universe.com/showthre...57303&page=230
there is a file named sh4-amino, which is on the Enigma or?

I've also seen some have called SH4-DVBAPI, what is this for?
and the latest version of this file I found was oscam-svn4123-SH4-DVBAPI-default-WEBIF.tar.gz on http://www.sat-universe.com/showthre...57303&page=240

Is there no newer version for sh4 DGS and Enigma2?

OK, I've tried the 4029 sh4 in recent PKT flash but may not work 100%.
it's probably my config files is wrong configuerade.

I test run my config on a xxx.dns server, on a cold boot it does not find the server, restart the EMU and find it.
Watch Canal Digital Ex: CANAL + Drama and change later to Viasat TV1000,
it works for about 30 minutes and then I lose the picture.

Hi all!

I've tried a few different configurations but should not it work.
it works for about 30 minutes and then I lose the picture,
someone who has the solution to my problem?
how hard I've tried to change my config files so it ends the same way,
bind failed (errno = 98)
and what is meant by: 9, Bad file Descriptor

-------------------------------------------------- -----------------------------
**** OSCam <<card server started at Mon Jan 7 16:52:05 2011
-------------------------------------------------- -----------------------------
01/07/2011 16:52:05 29573AC0's version = 1.00-unstable_svn, build # 4123, system = sh4-linux, nice =- 10
01/07/2011 16:52:05 29573AC0's client max. idle = 120 sec, debug level = 0
01/07/2011 17:23:05 2B8214E8 c user (090F & 000000/099C/94: 0E0B): found (372 ms) by newcamd-reader2 (2 of 2 avail)
01/07/2011 17:23:15 2A0214E8 p bind failed (errno = 98)
01/07/2011 17:23:15 2A0214E8 p exit with signal 1
01/07/2011 17:23:15 2A0214E8 p thread 2A0214E8 ended!
01/07/2011 17:23:15 2B8214E8 c user (090F & 000000/099C/94: F288): found (373 ms) by newcamd-reader2 (2 of 2 avail)
01/07/2011 17:23:25 2B8214E8 c request_cw () failed on multiple-reader (0) errno = 9, Bad file Descriptor

####### oscam.conf #######

[global]
nice= -10
pidfile= /tmp/oscam.pid
# logfile=/dev/null
logfile= /tmp/oscam.log
disablelog= 0
disableuserfile= 0
maxlogsize= 32
# waitforcards=1
waitforcards= 0
# preferlocalcards=1
preferlocalcards= 0
cachedelay= 0
#bindwait=120
bindwait= 60


[dvbapi]
enabled= 1
# boxtype: dbox2|dreambox|ufs910|ipbox
boxtype= dbox2
user= user
# au=default:0
au= 1


########## oscam.dvbapi ###########

[dvbapi]
# caid #
P:0B00:000000 1
P:090F:000000 1
P:093E:000000 1


########## oscam.server ###########

#
# reader configuration #
#

# remote newcamd reader with fallback for group 1

[reader]
label = MULTIPLE
protocol = newcamd
key = 0102030405060708091011121314
device = xxxx.xxxx.dns,18000,18001
account = xxxx,xxxx
group = 1,2
caid = 090F,093E,0B00

[reader]
label = newcamd-reader1
protocol = newcamd
key = 0102030405060708091011121314
device = xxxx.xxxx.dns,19000,20000
account = xxxx,xxxx
group = 1,2
caid = 0B00

[reader]
label = newcamd-reader2
protocol = newcamd
key = 0102030405060708091011121314
device = xxxx.xxxx.dns,19001,20001
account = xxxx,xxxx
group = 1,2
caid = 090F,093E

########## oscam.user ###########
# user configuration

[account]
user= user
pwd= user
group= 1,2,3,4
# uniq= 0
# AU entsprechend anpassen oder deaktivieren (beim Deaktivieren auch die anderen Configs berücksichtigen!)
au= 1
# au= reader_oscam
# au= 1 (defult)
ident= 0B00:000000;090F:000000;093E:000000
caid= 0B00,090F,093E


does anyone know what is wrong with my config?

//dreamnu