oscam and c line

[kostasbmw]

i have a c line for testing and setting up oscam

i only have the qbox with a wkraft image and emus installed

a friend told me that oscam will run faster than cccam 2.30 i dont know

thats why i want to try

my problem is
1.do i have to setup oscam server and client or just server or client ..i dont have any cards

2.i see example in the oscam files but i think i dont really need all this stuff

i have a c line converter to oscam server...


a little bit of help appeciated

 

[ASiC]

You will use the oscam as a client. The cccam>oscam converter will give you the configuration for the oscam.server file.
Copy/paste the config into a text file file and save it with the name oscam.server then ftp it to the /var/oscam/conf, change it's permissions to 755 and you are ready.

Alternatively, if your oscam built has the webui enabled, you can logon to that, go to files and copy/paste the configuration to the oscam.server

 

[Calokay]

It's not that simple. To use oscam, so you must know what you need? To have implemented the emu , so it is suitable oscam ymod 18 - T50 - 52 , or V.17 - DOSC 19th I definitely recommend the oscam emu , because replacing share , which will be available or will not be enough to provide fast access eg . N*S
Config is not uniform. Doscam for the reader to C-line doscam.cfg,
while for oscam ymod a oscam.server.

Example reader for C-line:

[reader]
label = CCcam_line
enable = 1
protocol = cccam
device = ***IP,***port
user = *****
password = *****
inactivitytimeout = 1
reconnecttimeout = 0
fix9993 = 0
group = 2
lb_weight = 100
cccversion = 2.3.0
cccmaxhops = 1
cccmindown = 0
ccckeepalive = 1

 

[ASiC]

It's not that simple.

If it's not, then why mine is working just fine?

eg. I'm not using some pirate sharing scumbag server. I have a legit card connected to my debian server.

 

[Calokay]

Friend post your starts:
"Oscam and C line

I have a C line for testing and setting up oscam "

So really do not know what it is you? :mecry:

I explained the principle, which I responded to different setting in Doscam and oscam ymode in the previous post.
What you use is up to you.
If you want to use the original card, so you have to oscame you have to configure in oscam reader in oscam.server, or doscam.cfg.

 

[kostasbmw]

ok guys i ll do some testing and i ll tell you the results

at the moment after i tried all images on planet i found wkraft bckp with all cams most stable