I have been running a card for a while with no problems whats so ever but for the last 2 days i have been trying to add another card into the working setup with no luck.
Card1 is S&Y Irish
Card2 is S&Y Basic
What is happening is the new card (2) is being seen but I get no tiers at all.
2013-10-30_12:14:12.13813 12:14:12 2300B80 r bt [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2013-10-30_12:14:12.13822 12:14:12 22FED60 r skyireland [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2013-10-30_12:14:13.10481 12:14:13 22FED60 r skyireland [mouse] card detected
2013-10-30_12:14:13.10571 12:14:13 2300B80 r bt [mouse] card detected
2013-10-30_12:14:15.35161 12:14:15 22FED60 r skyireland [mouse] ATR: 3F C0 3F FD 13 25 02 50 00 0F
2013-10-30_12:14:15.35163 12:14:15 22FED60 r skyireland [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2013-10-30_12:14:15.35163 12:14:15 22FED60 r skyireland [mouse] Init card protocol T3, FI=1, F=372, D=1, N=63
2013-10-30_12:14:15.35164 12:14:15 22FED60 r skyireland [mouse] Setting baudrate to 9600 bps
2013-10-30_12:14:15.35204 12:14:15 22FED60 r skyireland [mouse] Calculated work ETU is 104.20 us
2013-10-30_12:14:15.35204 12:14:15 22FED60 r skyireland [mouse] ERROR: Parse_ATR returned error
2013-10-30_12:14:15.35205 12:14:15 22FED60 r skyireland [mouse] Error activating card.
2013-10-30_12:14:16.47250 12:14:16 2300B80 r bt [mouse] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2013-10-30_12:14:16.47251 12:14:16 2300B80 r bt [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2013-10-30_12:14:16.47251 12:14:16 2300B80 r bt [mouse] Setting baudrate to 38400 bps
2013-10-30_12:14:16.47306 12:14:16 2300B80 r bt [mouse] Calculated work ETU is 26.05 us
2013-10-30_12:14:16.48891 12:14:16 2300B80 r bt [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013-10-30_12:14:17.59344 12:14:17 2300B80 r bt [mouse] Card type: SYBV
2013-10-30_12:14:17.59347 12:14:17 2300B80 r bt [mouse] Rom version: 40LF
2013-10-30_12:14:18.00665 12:14:18 2300B80 r bt [mouse] parental lock setting: 3F 00 0E 00
2013-10-30_12:14:18.00668 12:14:18 2300B80 r bt [mouse] type: VideoGuard BSkyB (0963), caid: 0963
2013-10-30_12:14:18.00668 12:14:18 2300B80 r bt [mouse] serial: *******, BoxID: ********, baseyear: 1997
2013-10-30_12:14:18.00669 12:14:18 2300B80 r bt [mouse] ready for requests
2013-10-30_12:14:18.00670 12:14:18 2300B80 r bt [mouse] found card system videoguard2
2013-10-30_12:14:18.00671 12:14:18 2300B80 r bt [videoguard2] card detected
2013-10-30_12:14:18.00671 12:14:18 2300B80 r bt [videoguard2] type: VideoGuard BSkyB (0963)
2013-10-30_12:14:19.21190 12:14:19 22FED60 r skyireland [mouse] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2013-10-30_12:14:19.21193 12:14:19 22FED60 r skyireland [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2013-10-30_12:14:19.21193 12:14:19 22FED60 r skyireland [mouse] Setting baudrate to 38400 bps
2013-10-30_12:14:19.21256 12:14:19 22FED60 r skyireland [mouse] Calculated work ETU is 26.05 us
2013-10-30_12:14:19.22838 12:14:19 22FED60 r skyireland [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013-10-30_12:14:20.33032 12:14:20 22FED60 r skyireland [mouse] Card type: SYBV
2013-10-30_12:14:20.33034 12:14:20 22FED60 r skyireland [mouse] Rom version: 40LF
2013-10-30_12:14:20.73632 12:14:20 22FED60 r skyireland [mouse] parental lock setting: 3F 00 0E 00
2013-10-30_12:14:20.73635 12:14:20 22FED60 r skyireland [mouse] type: VideoGuard BSkyB (0963), caid: 0963
2013-10-30_12:14:20.73636 12:14:20 22FED60 r skyireland [mouse] serial: ********, BoxID: ********, baseyear: 1997
2013-10-30_12:14:20.73636 12:14:20 22FED60 r skyireland [mouse] ready for requests
2013-10-30_12:14:20.73637 12:14:20 22FED60 r skyireland [mouse] found card system videoguard2
2013-10-30_12:14:20.73637 12:14:20 22FED60 r skyireland [videoguard2] card detected
2013-10-30_12:14:20.73637 12:14:20 22FED60 r skyireland [videoguard2] type: VideoGuard BSkyB (0963)
2013-10-30_12:14:20.76668 12:14:20 22FED60 r skyireland [videoguard2] tier: 0003, expiry date: 2013/12/08-00:00:00
...
Any ideas on why the basic card, bt wont work as looking at the data returned they seem to be the same card revision.
Oh and it works in its receiver
joolz
Card1 is S&Y Irish
Card2 is S&Y Basic
What is happening is the new card (2) is being seen but I get no tiers at all.
2013-10-30_12:14:12.13813 12:14:12 2300B80 r bt [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2013-10-30_12:14:12.13822 12:14:12 22FED60 r skyireland [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2013-10-30_12:14:13.10481 12:14:13 22FED60 r skyireland [mouse] card detected
2013-10-30_12:14:13.10571 12:14:13 2300B80 r bt [mouse] card detected
2013-10-30_12:14:15.35161 12:14:15 22FED60 r skyireland [mouse] ATR: 3F C0 3F FD 13 25 02 50 00 0F
2013-10-30_12:14:15.35163 12:14:15 22FED60 r skyireland [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2013-10-30_12:14:15.35163 12:14:15 22FED60 r skyireland [mouse] Init card protocol T3, FI=1, F=372, D=1, N=63
2013-10-30_12:14:15.35164 12:14:15 22FED60 r skyireland [mouse] Setting baudrate to 9600 bps
2013-10-30_12:14:15.35204 12:14:15 22FED60 r skyireland [mouse] Calculated work ETU is 104.20 us
2013-10-30_12:14:15.35204 12:14:15 22FED60 r skyireland [mouse] ERROR: Parse_ATR returned error
2013-10-30_12:14:15.35205 12:14:15 22FED60 r skyireland [mouse] Error activating card.
2013-10-30_12:14:16.47250 12:14:16 2300B80 r bt [mouse] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2013-10-30_12:14:16.47251 12:14:16 2300B80 r bt [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2013-10-30_12:14:16.47251 12:14:16 2300B80 r bt [mouse] Setting baudrate to 38400 bps
2013-10-30_12:14:16.47306 12:14:16 2300B80 r bt [mouse] Calculated work ETU is 26.05 us
2013-10-30_12:14:16.48891 12:14:16 2300B80 r bt [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013-10-30_12:14:17.59344 12:14:17 2300B80 r bt [mouse] Card type: SYBV
2013-10-30_12:14:17.59347 12:14:17 2300B80 r bt [mouse] Rom version: 40LF
2013-10-30_12:14:18.00665 12:14:18 2300B80 r bt [mouse] parental lock setting: 3F 00 0E 00
2013-10-30_12:14:18.00668 12:14:18 2300B80 r bt [mouse] type: VideoGuard BSkyB (0963), caid: 0963
2013-10-30_12:14:18.00668 12:14:18 2300B80 r bt [mouse] serial: *******, BoxID: ********, baseyear: 1997
2013-10-30_12:14:18.00669 12:14:18 2300B80 r bt [mouse] ready for requests
2013-10-30_12:14:18.00670 12:14:18 2300B80 r bt [mouse] found card system videoguard2
2013-10-30_12:14:18.00671 12:14:18 2300B80 r bt [videoguard2] card detected
2013-10-30_12:14:18.00671 12:14:18 2300B80 r bt [videoguard2] type: VideoGuard BSkyB (0963)
2013-10-30_12:14:19.21190 12:14:19 22FED60 r skyireland [mouse] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2013-10-30_12:14:19.21193 12:14:19 22FED60 r skyireland [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2013-10-30_12:14:19.21193 12:14:19 22FED60 r skyireland [mouse] Setting baudrate to 38400 bps
2013-10-30_12:14:19.21256 12:14:19 22FED60 r skyireland [mouse] Calculated work ETU is 26.05 us
2013-10-30_12:14:19.22838 12:14:19 22FED60 r skyireland [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013-10-30_12:14:20.33032 12:14:20 22FED60 r skyireland [mouse] Card type: SYBV
2013-10-30_12:14:20.33034 12:14:20 22FED60 r skyireland [mouse] Rom version: 40LF
2013-10-30_12:14:20.73632 12:14:20 22FED60 r skyireland [mouse] parental lock setting: 3F 00 0E 00
2013-10-30_12:14:20.73635 12:14:20 22FED60 r skyireland [mouse] type: VideoGuard BSkyB (0963), caid: 0963
2013-10-30_12:14:20.73636 12:14:20 22FED60 r skyireland [mouse] serial: ********, BoxID: ********, baseyear: 1997
2013-10-30_12:14:20.73636 12:14:20 22FED60 r skyireland [mouse] ready for requests
2013-10-30_12:14:20.73637 12:14:20 22FED60 r skyireland [mouse] found card system videoguard2
2013-10-30_12:14:20.73637 12:14:20 22FED60 r skyireland [videoguard2] card detected
2013-10-30_12:14:20.73637 12:14:20 22FED60 r skyireland [videoguard2] type: VideoGuard BSkyB (0963)
2013-10-30_12:14:20.76668 12:14:20 22FED60 r skyireland [videoguard2] tier: 0003, expiry date: 2013/12/08-00:00:00
...
Any ideas on why the basic card, bt wont work as looking at the data returned they seem to be the same card revision.
Oh and it works in its receiver
joolz
