yes i tried lot times but not sucess when i open eromgrate and clicl on Next Ortonx403p show instilasing sdram failed try again plz sir tell what can i do now
Turn off the receiver, with power
1. Open Upgrade Upgrade_RS232
2. Press Bows (view), I select the firmware file.
3.Select the COM port you are using on your computer.
4.Select Upgrade Type (Type update)
5.Press Next (later), you will see a screen like below
6.The program is expected to enable the receiver.
Turn on the receiver within 15 seconds, the update will start automatically.
7.During the upgrade you will see progress:
wait until the update is complete, the receiver will restart.