Openbox S1 Questions

overbene

Registered
Messages
2
Hi everybody - hope you can help :)

I have bought an Openbox S1 PVR Receiver and with the Shortkey 1117 I can access the hidden menue. Now as I am nre to this box i do not have any idea WHICH emulator this is and how I can start cardsharing with this. i just want to share from living room to bedroom but i really do not know where to start with this box.

I would be very thankful if you can help me.

Thx

bb:thum:
 

JAKITAKI

Super VIP
Messages
9,217
Hi everybody - hope you can help :)

I have bought an Openbox S1 PVR Receiver and with the Shortkey 1117 I can access the hidden menue. Now as I am nre to this box i do not have any idea WHICH emulator this is and how I can start cardsharing with this. i just want to share from living room to bedroom but i really do not know where to start with this box.

I would be very thankful if you can help me.

Thx

bb:thum:

maybe it will help ;)

Setting the card sharing client.

1. The client part is implemented on the basis of the Spread of the protocol TCP / IP - newcamD ..
The presence of other protocols - only a matter of time 1.Vklyuchaem receiver. 2.Nazhimaem button menu 3.After how they got to the menu press 1113 . 4.In the pop-up menu "List Servers "are 16 slots (servers) for setting, from 0 through 15. Use the CH ^ CH ¡The select the desired slot number (server) and press the red button on the remote control " Edit " 1. name - enter the name of the slot, such as NTV + 2. Active - enabling / disabling the slot 3. Address - IP address or URL of the server 4. port - The port number on the server 5. Username - Your username issued sharodatelem 6. Password - the password to your login 7. Key - DES key (issued the host server) 8. filter - the filter-No. To enable this option you can filter (tie) this slot to one (several) id that provider sharinga broadcasts on this port (configured in the previous menu on the green button "Filter"), and provided that these ports are available in the (paid by you) package. Example, your ISP from one port, say number 11505 are 5 ident - 023700, 041700, 042700, 023100, 0022S00 - no need to borrow 5 servers (slots), it is sufficient to configure the port for one slot, then turn on the "Filter" and specify the filter settings are available to you with the userid records with 0500 - 023700, 0500 - 041700, 0500 - 042700, 0500 - 023100, 0500 - 022S00. 9. Channel - Channel 1, the second channel, or both - Both . With this function, you can distribute requests to different slots for recording channels (1st or 2nd). from which the request will go to the server balls, if your sharodatel "bans" for the double request. To request went to different servers / ports / accounts, it needs to create two slots with different servers / ports / accounts, and in the "Channel", respectively, to put the 1st or 2nd (to do with the second account will be used Only when the vac is set to record 2 channels). If your ISP does not block bans request for a double, then put Both (Both). Upon completion of data entry, press BACK - Returns to the previous menu. If the receiver is set to the correct channel you previously entered and checked the network settings are correct all the data server, the right of the name of the server on success konekta will display UP , if you see DOWN - check the correctness of the account settings or network settings. configuring the slot ( server), you have the ability to control operation of the server, which just hit the OK button on the remote control after selecting the desired server 1. name - the name of the server (slot) that you have registered when using the receiver to the previous menu 2. status - status of the connection with Server UP / DOWN (running / not running) 3. access system - all available for your userid subscribe to this particular server port sh ** s. Press <> to see all available on your subscription userid 4. Connected - while connecting to the server 5. Posted package - the total number of packets sent from the receiver to the port server 6. Minimum time - the minimum response time of the server balls 7. Max time - the maximum response time from the server sharinga 8. past 16 average - the average server response time and the last 16 parcels Filters No. Ident Filters are created in the same way as in the line of X-5XX. reallocated to the new receiver a memory key BISS, which also introduced DCW and userid anchor (filters) for ident: 1. 127 positions for key BISS and DCW (static keys) menu - 1117 - BISS 2. 64 positions for filters (binding) sharinga Com port on the menu - 1117 - Ident 3. 64 positions for filters (binding) balls on the menu Lan port - 1113 - Filter One thing to bear in mind that if you have a peg (filter) for Com port - the channels with the same userid on Lan port will not work!
 
Top