No Ca Found at DM800SE- Sim 2.10 Other options then DreamUp?

A

angelfall

Member
Messages
92
Well I managed to flash it with orginal IMG. I think. The new TS-Img ver2.0 anyway I got NoCA.
I have no problem with fixing this with serial cable(rs232) at dm800, but now its worse..
I read the tourtial with service usb calbe and dream Up 1.3.3.7
But I really can not get any contact...
Is it some other program I can use..that is easier to use to get contact again to reflash the box...
I also try to push the service button nothing happen...
Hope really that someone can help me out..

Best Regards

Af
 
Last edited:
Serjoga

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,086
upload with browser Mozilla or Opera or Hrome not problem and need for this 2-3 min.

a3b4278111e8.jpg
 
A

angelfall

Member
Messages
92
Serjoga said:
upload with browser Mozilla or Opera or Hrome not problem and need for this 2-3 min.

a3b4278111e8.jpg
Click to expand...

But man I can not open it with browser, when I got no ca found...
Got no ipadress to open it with ofc.
Dont get **stop** in the display then when the BL is corrupt..
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,546
The method posted by Serjoga wont work if your showing the no CA error.

The only method is the one you describe with the service cable and ethernet
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,546
Does your SE have the mini flashup button on the rear ?
 
A

angelfall

Member
Messages
92
Ferret said:
Does your SE have the mini flashup button on the rear ?
Click to expand...

Its on the rear...
Whats the diffrent in this ?
the box is with these new damn fans that goes way to fast...JinLiFen fans...not Sunshine fans...

Impossible to make them go under 2 800 RPM if you heard about them..

The box has SIM 2.10 inside
 
Last edited:
A

angelfall

Member
Messages
92
1--- Connect USB cable to service slot on DM800SE/DM500HD and USB slot on Pc. Windows will then install the driver

You will notice, windows created a virtual Com Port connection to be be used ( in this case Com Port 4)

Thats the problem it will not install the driver, it will find it..but not install it...
(win7) Is that the problem.
Or shall I use a box that dont have a corrupt BL to install the driver? Im just making a plan before I go home...
as I said Im at work and multitasking..
Hoho
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,546
angelfall said:
Its on the rear...
Whats the diffrent in this ?
the box is with these new damn fans that goes way to fast...JinLiFen fans...not Sunshine fans...

Impossible to make them go under 2 800 RPM if you heard about them..

The box has SIM 2.10 inside
Click to expand...

Thats good it make it easy to recover with nothing speacial.

Pull the power not standby pull it.

Press and hold the miniflashup button

Put the power back in keeping the flashup button pressed till you see a IP on the 800se screen

Pop that ip in your browser and flash as normal.
 
A

angelfall

Member
Messages
92
Ferret said:
Thats good it make it easy to recover with nothing speacial.

Pull the power not standby pull it.

Press and hold the miniflashup button

Put the power back in keeping the flashup button pressed till you see a IP on the 800se screen

Pop that ip in your browser and flash as normal.
Click to expand...

LOL!
Im a little shamed now!!!!
So Easy with this little miracle buttion

Ohhh then I got a sunray flash...

Close this thread..
Case Closed

Too easy.
Flashing now!

100%
 
You must log in or register to reply here.
Top