need help to upgrade my Old DM800

[eli.racheli]

hello ,

I have DM800HD sim 2.01 (opened the box and checked) .
Now I have the image newnigma v2.8.3 OE 1.5 BL75 .

I have tried all those steps with no success , I did it all with dreamup beacuse with browser the flash button does not response (tried all browsers and the button does not cause the nfi file to start uploading) :

1. DreamUp - ver 1.3.3.5 and Up casue the box to have no ca found on the box - after the step of turning the box on in got stuck just before the flash button should be enable. DreamUp - ver 1.3.3.4 works OK.
2. Flashing directly lateset version of ramhimaher or pli got a message from the Dream UP - Invalid imag or old version.
3. Flasing second stage BL82 and than immedialty lateset version got a message from the dream up - invalid image or old version .
3. Flasing second stage BL76 and than immedialty lateset version got a message from the dream up - invalid image or old version .
3. Flasing second stage BL76 and than immedialty second stage BL82 and than lateset version got a message from the dream up - invalid image or old version .

Is there specific second stage for my BOX ?
Is there a way that my oldy will have lateset version ?

many thanks guys !

 

[frank087234]

try flash using browser.
flash first bootloader 84d... Google forum
then follow with new image oe2.0 with 84d bootloader. GOOGLE

 

[Ferret]

You need to flash the 84d ssl to your box first then image.

heres the bootloader

http://www.sat-universe.com/showpost.php?p=1076840&postcount=10

 

[eli.racheli]

It is not working for me to upload with browser.

I will try to upload the bootloader and will update here .

what is the Dif. between A B C & D ?

thanks .

 

[Ferret]

D is used for the oe2.0 images

 

[eli.racheli]

Ok.
Is this are the steps : ?

1. Load dreamup ver 1.3.3.4
2. Press connect
3. turn on dreambox
4. Press Flash and choose the nfi for bootloader 84d.
5. When done , Press again on flash and choose image bl84d.
6. Reboot

I have no option to work with the browser beacuse the flash button does not response .

Thanks

 

[Tampo]

how to look at the box bootloader
entry into Stop mode and type in cmd "Telnet ipbox"
example: telnet 192.168.1.3

 

[Ferret]

Ok.
Is this are the steps : ?

1. Load dreamup ver 1.3.3.4
2. Press connect
3. turn on dreambox
4. Press Flash and choose the nfi for bootloader 84d.
5. When done , Press again on flash and choose image bl84d.
6. Reboot

I have no option to work with the browser beacuse the flash button does not response .

Thanks

Yes but have you tried other browsers for browser flashing ?

 

[eli.racheli]

Yes but have you tried other browsers for browser flashing ?

Yes , chrome , FF , IE ....

will it not work with dreamup ?

 

[Ferret]

If you use the bin file version of the bootloader yes

 

[eli.racheli]

sorry for not understaing .
with the dream up should I use bootloader nfi or bootloader bin ?

 

[Ferret]

sorry for not understaing .
with the dream up should I use bootloader nfi or bootloader bin ?

Bin file

 

[eli.racheli]

Bin file

On the dream up there is no option for bin file .
Should I use other software ?
With Nfi I got the same error .

 

[eli.racheli]

Ok.

The procedure is :
1. dream up - and do bootloader 84d.
2. reboot and load with stop (press the standby button).
3. open browser and IP of the box
4. flash with browser the image (i tried with ramimaher newnigma2 4.0.9 BL84d).

works perfect !!!!!

thank you all !

 

[Ferret]

Well done so you managed to use browser flashing in the end.

Good.:thum: