need help on a openbox v8

[maleka]

need help i go to network enter 6666 nand all comes up is cs control i cant see constant cw all comes up is cs control for server set up
any body thanks .

 

[jani_sat]

go to network enter 7777

 

[maleka]

did nothing 7777
thank you for try to help

 

[darius1]

need help i go to network enter 6666 nand all comes up is cs control i cant see constant cw all comes up is cs control for server set up
any body thanks .

go to network enter 7777

did nothing 7777
thank you for try to help

It should be 6666 or 7777 or 8888
if it still dose not work you should update your box whit last S/W again.

 

[maleka]

thank you i think i have to update the firmware witch firmware should i update to and how by sr32 cause i tri by usb no luck
thank you

 

[maleka]

ok i enter 6666 and come up cs control o do not see ehere to enter constan cw any idia where to enter constant cw keys thanks in advance

 

[JAKITAKI]

ok i enter 6666 and come up cs control o do not see ehere to enter constan cw any idia where to enter constant cw keys thanks in advance

1. Move Menu to “Network Local Setting” by Remote Controller, but not press “OK” on remote controller

2. Press 6666 on remote control, It will show Menu with “ Camds Setup”

3. Enter Camds Setup -> CCcam Cilent Setup -> Manage Config Files, Press “ OK ” , Choose Constant.cw （Biss Key with CW font）, Press “Add”, then you can put in “ Biss Key” .

 

[maleka]

thanks jakitaki did not work sorry i fforgot to mention its a openbox v8 combo i look to see if thers a bin like for the v8 no luck ani info please thanks.

 

[kammy4321]

need help with v8 combo

hi
can anyone help me with the CHANNEL LIST for openbox v8 combo
thanks

 

[temywijaya]

Hai all ...
I buy skybox v8 combo without any search on many reference,
I replace my Skybox F3 with this because skybox F3 power supply failure with bad cap inside and damage the memory pga(hot ic memory and dead machine) ,
with many different in menu ,
V8 doesn't have input constant.cw like F3 seem very many choice file to load ...

v8
but only CA 6666 with many list input .
failed to input biss working key...
My small icon (biss) with B on info on channel doesn't show up


Seems same old problem on F3 did reconize CSA work on channel but if the small icon is light maybe same as Skybox F3 with Update software can open the channel

Terrestrial mode on and the channel list maybe big problem with restart boot loop , only rapid key on remote can help after that if choice only set Sat and remove terestrial can avoid boot loop.
S/W 20150603

still waiting on UPDATE software