Ncam Emu compiled and patched by READ

  • Thread starter ooOO_SORGOS_OOoo
  • Start date

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,282
Ncam 8.7 compiled and patched by marouan & READ

-New patch
-Improvements emu
-Fix Auto Update Keys
-Fix some bugs
-Update a lot of files
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,282
Ncam 8.8 compiled and patched by marouan & READ

-Improvements emu
-clean implementation of the card list
-(rarely used modules are set from default on to default off (no codechange just setup switch))
-fix reset to wrong defaults
-[nemu] Changed function declaration to a more clean way
-[streamserver] Improved Compel algorithm
(Picture is more stable now with minimum glitches only at key change (every ~53 seconds). The teletext pid is also descrambled now)
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,282
Ncam.config​ Files​
16.02.2019
 

oys

Well Known Member
Messages
557
Ncam.config​ Files​

18.02.2019 @fairman

Code:
[/B][/COLOR][COLOR=blue][B]fix some wrong code ..

 

oys

Well Known Member
Messages
557



Ncam v 8.9

Ncam compiled and patched by marouan & RAED



Code:
[B]-New patched
-Fixes some powerVU bugs
-insert hd03 and hd04 atr[/B]
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,282
Ncam 9.0 compiled and patched by marouan & READ


-[powervu] Added support for hash mode 30
-insert hd03 and hd04 atr
-[dvbapi + powervu] Properly set the descrambler mode for CSA
(When watching a DES powervu channel, switching back to CSA channels required a reboot on some receivers. Other more resilient receivers just threw an error(ioctl(CA_SET_DESCR_MODE): Invalid argument), but continued to work. This was described as a bug of these receivers, but in fact it was a bug of oscam-emu. The correct mode for the CSA algorithm is CBC and not ECB! Thanks to all who helped)
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,282
Ncam 9.1 compiled and patched by marouan & READ

-Improvement the emu
-[nemu] Fixed potential deadlock in powervu emm handling (When the key DB contains no powervu keys, the powervu_get_hexserials() retuns 0 and the mutex in emu_get_pvu_emm_filter() is not released)
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,282
Ncam 9.2 compiled and patched by marouan & READ

-Improvement the emu
-Fixes detecte reader and file-keys of constant.cw
-[powervu] Added support for various hash modes (This includes hash modes 0, 0x0B, 0x0C, 0x0D, 0x0E and greater than 0x27)


 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,282
Ncam 9.3 compiled and patched by marouan & READ

-[powervu] Added support for hash mode 31
 

oys

Well Known Member
Messages
557
Ncam v 9.4



Code:
[B]-[ncam] Better solution for setting CBC mode for CSA
 (Instead of hard coding the algo mode in the dvbapi_write_cw(), we 
now initialize the er->cw_ex variable with the proper value)
-Simpler code for the EXTENDED_CW struct
-[ncam] Renamed caid_is_biss_static() to caid_is_biss_fixed()[/B]
 

zvonko67

Well Known Member
Messages
1,763
Ncam v 9.4



Code:
[B]-[ncam] Better solution for setting CBC mode for CSA
 (Instead of hard coding the algo mode in the dvbapi_write_cw(), we 
now initialize the er->cw_ex variable with the proper value)
-Simpler code for the EXTENDED_CW struct
-[ncam] Renamed caid_is_biss_static() to caid_is_biss_fixed()[/B]

Here are Only Bin file ..


(build-mips (Gigablue-Dream-VU+-Xtrend-Formuler

(build-sh4 (Golden Media-Galaxy innovations-Amiko


(cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT


(aarch64-ARM (VU+4K Duo4K + osmio4k

(build-x86-Linux-pc (32bit-i686

(build-x86-Linux-pc (64bit

(build-mips (Tiviar plus and similar

(build-mips-router (Routers Mipsel DD-WRT
 

maumixio

Staff member
Moderator
Messages
2,873
Ncam 9.5

Ncam 9.5 New Fix compiled and patched by marouan & RAED

-[powervu] Added support for hash mode 32
-[director] Fixed cw checksum bytes for nano EE
-[DVBAPI] 128 bit keys
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,282
Ncam 9.6 compiled and patched by marouan & READ

-[powervu] Added support for modeCW 4 and modeUnmask 4
 

oys

Well Known Member
Messages
557

Ncam v 9.7

Code:
-Rework on dvbapi to incrase the amount of descramblers
-Support for DVB-CISSA scrambling algorithm and 16 byte CWs

Get available descramblers in box and BISS2 related changes

* Instead of using a predefined number of descramblers (16 until now), oscam now gets the exact number of available descramblers in box.
* Skip cw checks for BISS2, similar to what is done for BISS1. BISS2 uses 16 byte cw, so some checks need to be skipped.
* Cosmetic changes including code refactoring, variable renaming and comment addition to several places.
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,282
Ncam 9.8 compiled and patched by marouan & READ

-Add support dvbcissa-biss2
-Increased max demux to 32 and max filters to 64
-Decreased max ecm pids to 16 and emm pids to 16
-Decreased max stream indices to 8
-[dvbapi] Increased MAX_STREAM_INDICES back to 32
(It should be equal to MAX_STREAM_PIDS or else it creates problems with specific powervu channels. A better solution (with will also result in even lower number of descramblers needed for powervu channels) will be added in the future)
-[nemu] Dropped drecrypt & videoguard module
(No channel uses it anymore)
-fix bug in disablecrccws_only_for
 

Afat45

Well Known Member
Messages
1,979
Ncam 9.9 compiled and patched by marouan & READ



  1. 02-05-2019
  2. -[nemu] Pass complete rdr structure to emu_process_ecm()
  3. (Also re-ordered arguments in powervu_ecm())
  4. -remove duplicate debug dump of er->ecm
  5. -fix bug in disablecrccws_only_for also in cacheex
  6. -general disable checksum correction code optimization
  7. -[powervu] Added new method for matching ECM and EMM keys
  8. (Read the wiki for instructions on how to use it: https://github.com/oscam-emu/o…der-new-method---may-2019
  9. This method is based on enigma2 namespace and it is only available for enigma2 and Tvheadend/VDR software for PC. Also, it does not work with stream relay)
  10. -[dvbapi] Fix for stapi, coolapi, etc
Download link


Ncam-Images-MIPS-IPK (All Mipsel devices ipk install file)


NCam-Images-OSDreambox-DEB (All ARM devices deb install file)


*************
Here are Only Bin file ..


(build-mips (Gigablue-Dream-VU+-Xtrend-Formuler

(build-sh4 (Golden Media-Galaxy innovations-Amiko


(cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT


(aarch64-ARM (VU+4K Duo4K + osmio4k

(build-x86-Linux-pc (32bit-i686

(build-x86-Linux-pc (64bit

(build-mips (Tiviar plus and similar

(build-mipszrouter (Routers Mipsel DD-WRT
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,282
Ncam 10.0 compiled and patched by marouan & READ

-[streamserver + powervu] Use the new key method here as well
(We can get the tsid, onid and ens values from the service reference, so this is possible after all)
-Cosmetics to log messages
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,282
Update ipk and deb files

-fix script install
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,282
Ncam 10.1 compiled and patched by marouan & READ

-[biss] Increased variable size to avoid potential overflow
-[viaccess] Fixed CW checksum bytes for viaccess 2
-Added support for a higher number of demux devices in CA PMT
(Modern enigma2 boxes with FCB tuners can have many demux devices,
so a new CA PMT descriptor that allows up to 128 demuxes (descriptor tag 0x86) is now supported.
Also, the get_demux_options() function is completely re-written,
so it doesn't care for the order of descriptors inside the CA PMT message)
 

oys

Well Known Member
Messages
557
Ncam v 10.2


Code:
-fix MODULE CONSTCW
-fix webif save issue with high var count
 
Last edited:
Top