ver.0.0.0.2
+ Fixed COM port selection.
INSTALLATION:
NDSCam should work with MyTheatre, AltDVB, SkyView, WatchTVPro, ProgDVB and some other apps.
Below you can see some installation samples and few tricks for the NDSCam.
ProgDVB:
1. Copy NDSCam.dll and NDSCam.ini file into the Plugins or the root folder.
2. Edit NDSCam.ini file.
MyTheatre:
1. MDWrapper is required. Place MDWrapper.dll into the Plugin folder and NDSCam files into the MDPlugins folder.
3. Edit NDSCam.ini file.
WatchTVPro:
1. Place NDSCam.dll, NDSCam.ini and NDSCam.cache file into the Plugins folder.
2. Edit NDSCam.ini file.
3. Set DO_TT_TRICK value from NDSCam.ini file to 1.
4. Edit NDSCam.cache (for more instructions see cache file).
5. If no luck, try to enable KS_DRIVER.
ABOUT THE INI FILE:
Ini file is used to storage the settings of NDSCam.
I suggest that you use always the latest ini file.
SETTING VALUE
[SETUP] - Main settings.
ACTIVE - [0/1] This activates the automatical plugin activation during software startup.
KS_DRIVER - [0/1] In case you are using KS Driver set this option to 1.
DO_TT_TRICK - [0/1] Set it to 1 if you are using WatchTVPro.
SCAN_CAT - [0/1] Used to get real EMM and CAID pids from CAT
SCAN_PMT - [0/1] Used to get real ECM pid from PMT
[COM] - COM port settings.
COM - [0-*] Place here your COM port number.
BAUDRATE - [0->] You can set the baudrate manually. Viasat cards seems to vork using a 9600. For Sky try 38400.
TIMEOUT - [0-*] This option affects the timing (in ms.) of reading/writting your card.
[EMM] - EMM settings are used to enable EMM updates.
USE_EMM - [0/1] Set this to 1 to activate EMM updates.
EMM-S - [0/1] Set this to 1 to activate EMM-S(Shared Group Addressed EMM's) updates.
EMM-U - [0/1] Set this to 1 to activate EMM-U(Unique or User Addressed EMM's) updates.
[LOGGING] - Logger settings (logger works only if NDSCam is active.)
LOG_ACTIVE - [0/1] Set this to 0 if you don't want to log anything from NDSCam.
LOG_ECM - [0/1] Activates the ECM logger.
LOG_EMM - [0/1] Activates the EMM logger (Logs all EMM's your card receives.)
LOG_EMM_ALL - [0/1] I don't suggest you to enable that one, because it will log all EMM packets and will slow NDSCam a lot.
The default settings should look like this:
[SETUP]
ACTIVE=1
KS_DRIVER=0
DO_TT_TRICK=0
SCAN_CAT=0
SCAN_PMT=0
[COM]
COM=1
BAUDRATE=9600
TIMEOUT=200
[EMM]
USE_EMM=1
EMM-S=1
EMM-U=1
[LOGGING]
LOG_ACTIVE=1
LOG_ECM=0
LOG_EMM=0
LOG_EMM_ALL=0