MPCS-ftv for CoolStream HD1

[juli13]

mpcs-ftv_v0.51_MPP_

16.06.2010

- Cccam - the amendment to implementcji
- Reader - adapting to the new version of cccam
- Newcamd - fixed login to the server, better servicing network problem
- Camd35 - improvements in the transmission of the card serial number

 

[juli13]

FTV v0.51.4

- Core - a new simple system limitacji ECM account, replacing anticascade.
  in the [account] or add a Rate Limit parameter specifying the number of possible ECM per minute for this account.
  Rate = 0 or no parameter means no limit.
  Enter an optional parameter Penalty set out how the user will be blocked when it exceeds the limit.
  Penalty = 0, the user gets the answer NOT FOUND
  Penalty = 1 answer FAKE (random Dcw)
  Penalty = 2 answer DISABLE (the user is treated as if he was blocked - ECMy are ignored)
  The default is 0
  Check and change of state takes place every 30 seconds.

 

[juli13]

FTV 0.51.5 fpr Coolstream hd1

- newcamd - fixed error asynchronous download server parameters
- Core - complemented the user message log - gives set limit ECMow

 

[elgeneral]

ver 0.51.8

- Telnet - fixed error grep and grepoff
- Reader seca - fixed dates + bitmap read from the card
- Reader nagra - fixed date readings tier + card
- Cccam - fixed reconnect

 

[juli13]

mpcs-ftv_v0.51.9_MPP for Coolstram hd1

- Telnet - new command:
users - shows status of connected users
reader (he / enable / off / disable / restart) label - off / turns on / restart the selected reader
readers - shows the state readerow
- Cccam - minor fixes in EMM
- Reader - preinitializacja readerow the configuration set to Enable = 2
This reader is initiated but blocked (not sent to him ECMy).
You can unlock it later via telnet command: label_readera a reader
We must remember that this function takes the memory at any rate inactive readers.

 

[juli13]

MPCS-ftv_ v0.52.0_MPP FOR CoolStream HD1

[B]ver 0.52.0[/B]
- Cccam - a new solution to the problem FAKE ECM + options and updated version
- Reader - Viaccess - update, added parameter specifying ccchop hop in May to see what the reader clients cccam
default = 0 ccchop card (Local)
- Core - fixed error termination of the program after logout / login with a failed telnet
- DVB - Patch for 9000 (available ready configuration), the first version of the soft priorities CAIDy
Prio should add a parameter in the [dvb] eg: Prio = 0B00, 0100.1803