Method of Opening PowerVu Channels in Enigma2 Using Oscam

JimBizkit · Oct 25, 2015

cbr900 said:
Hi

Is there a way to add the "Include ECM in http streams" setting in vix images...please

I do not know. But you can use oscam-emu without this option. It is only required for OSEmu.

ricard silveira · Oct 25, 2015

How can osemu install with openatv3.0 and oscam-emu mips?

tuvalo · Oct 25, 2015

JimBizkit said:
I do not know. But you can use oscam-emu without this option. It is only required for OSEmu.

"oscam-emu" means clearing picture directly without streaming?

JimBizkit · Oct 25, 2015

cockta said:
"oscam-emu" means clearing picture directly without streaming?

no, this is not possible.

tuvalo · Oct 26, 2015

Is it essential to add caid into reader like this:

Code:

[reader]
label                         = emulator
protocol                      = emu
device                        = emulator
caid                          = [COLOR="Red"]OE00[/COLOR],0500
detect                        = cd
ident                         = 
group                         = 1
emmcache                      = 1,1,2
audisabled                    = 1

hibees09 · Oct 27, 2015

Guys can someone post there softcam key and oscam config files?

I cannot get this working on pli

Cheers

Spiros91 · Oct 28, 2015

can someone send me a full tutorial for oscam how to configure it in openatv 5.0 for powervu channels please? Im noobie i need a full and easy tutorial thanks

Pernambuco · Oct 29, 2015

Spiros91 said:
... full tutorial for oscam how to configure it in openatv 5.0 for powervu channels please? ...

Have a look at post #1.

jimpapa · Oct 29, 2015

Hello

I have a question for oscam experts

Can I use the patched version of oscam both for powervu channels and as a normal reader for cccam and mgcamd lines?

Is it possible something to go wrong if I put my cccam or mgcamd line in this patched version?

jojor · Oct 29, 2015

Is Dm8000 capable of opening powervu channels using the method of stream ??

zboard · Oct 29, 2015

Open vix didn't work. No ecm pis on the http stream.

joeuser · Oct 29, 2015

jimpapa said:
Hello

I have a question for oscam experts

Can I use the patched version of oscam both for powervu channels and as a normal reader for cccam and mgcamd lines?

Is it possible something to go wrong if I put my cccam or mgcamd line in this patched version?

Yes, all the normal functions still work also.

fmoreira · Oct 31, 2015

This method works on a Dreambox 800 Pvr with Ts 3.0 image?

I can´t find any place to enable "Include ECM in http streams" or to adjust the "ECM fix delay"

any help please?

fmoreira · Nov 1, 2015

naja said:
This method works on a Dreambox 800 Pvr with Ts 3.0 image?

I can´t find any place to enable "Include ECM in http streams" or to adjust the "ECM fix delay"

any help please?

Problem solved with another Oscam version...

But still not working...

I have this Oscam logo:

2015/10/31 23:35:43 156B5F00 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/10/31 23:35:45 00000000 [Emu] stream client connected with request /1:0:1:384:1:5E:30B048:0:0:0:
2015/10/31 23:35:45 156B5F00 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 03D4 PROVID: 000000
2015/10/31 23:35:45 156B5F00 c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in PMT
2015/10/31 23:35:45 156B5F00 c (dvbapi) Demuxer 0 serving srvid 0384 (0E00@000000:0384 unknown) on adapter 0000 camask 0008 index 0003 pmtpid 03DE
2015/10/31 23:35:45 156B5F00 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/10/31 23:35:46 156B5F00 c (dvbapi) Demuxer 1 ecmpid 0 CAID: 0E00 ECM_PID: 03D4 PROVID: 000000
2015/10/31 23:35:46 156B5F00 c (dvbapi) Demuxer 1 found 1 ECMpids and 3 STREAMpids in PMT
2015/10/31 23:35:46 156B5F00 c (dvbapi) Demuxer 1 serving srvid 0384 (0E00@000000:0384 unknown) on adapter 0000 camask 0004 index 0002 pmtpid 03DE

2015/10/31 23:58:19 156B5F00 c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!

Anyone can help me?

Thanks!!

JimBizkit · Nov 1, 2015

make sure the emu reader has caid 0E00 and ident 0E00:000000;
the easy way is to delete the emu reader from oscam.server and restarting oscam (it will auto-create the emu reader if none exists)

tuvalo · Nov 1, 2015

My E2 receiver seems to be to slow as its freezing all the time.

Is there a possibility to encode PowerVu Channels in an oscam/raspberry or linux pc server - without DVB-S card - and send keys to Enigma2 receiver?

fmoreira · Nov 1, 2015

JimBizkit said:
make sure the emu reader has caid 0E00 and ident 0E00:000000;
the easy way is to delete the emu reader from oscam.server and restarting oscam (it will auto-create the emu reader if none exists)

The emu reader is correct (with caid 0E00 and ident 0E00:000000)

I delete and restart in the same... but the problem remains...

It´s possible show me the basic configuration off Oscam files? (Conf, server, etc)?

My configurations are:

Oscam.conf
[global]
logfile = stdout
nice = -1
waitforcards = 0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = user1
pmt_mode = 0
request_mode = 0

[webif]
httpport = 16002
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 30
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

Oscam.server

[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000
group = 1
emmcache = 1,1,2,1
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000000

Thanks!!

JimBizkit · Nov 1, 2015

your user1 user needs to be in group one

oscam.user

[account]
user = user1
pwd = user1
au = 1
group = 1,2,3,4,5,6,7

kalehrl · Nov 1, 2015

Is there a possibility to encode PowerVu Channels in an oscam/raspberry or linux pc server - without DVB-S card - and send keys to Enigma2 receiver?

Yes, that's the reason why there is OSEmu.
You run it on a linux PC server.
When you zap on a PV channel, the OSEmu takes the stream from the box, decrypts it and streams it back to the receiver for watching. You need to add PV channels manually using a dreamboxedit and it's described HERE. Your PC server doesn't need to be powerful. I run it on an ancient asus eeepc 4g surf model with an atom 630MHz

D) processor and it takes less than 10% of processor time.

fmoreira · Nov 1, 2015

JimBizkit said:
your user1 user needs to be in group one

oscam.user

[account]
user = user1
pwd = user1
au = 1
group = 1,2,3,4,5,6,7

Thanks...

I sttill with a black screen, oscam logo:

2015/11/01 13:30:55 0E295ED7 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/11/01 13:30:55 46E93232 c (dvbapi) dvbapi channelcache loaded from /etc/oscam.ccache
2015/11/01 13:30:55 46E93232 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/11/01 13:30:56 0E295ED7 r (reader) emulator [emu] card detected
2015/11/01 13:30:57 0E295ED7 r (reader) emulator [emu] found card system emu
2015/11/01 13:30:57 0E295ED7 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/11/01 13:30:57 0E295ED7 r reading key file: /etc/SoftCam.Key
2015/11/01 13:30:57 00000000 [Emu] stream client connected with request /1:0:1:384:1:5E:30B048:0:0:0:
2015/11/01 13:30:58 46E93232 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 03D4 PROVID: 000000
2015/11/01 13:30:58 46E93232 c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in PMT
2015/11/01 13:30:58 46E93232 c (dvbapi) Demuxer 0 serving srvid 0384 (0E00@000000:0384 unknown) on adapter 0000 camask 0008 index 0003 pmtpid 03DE
2015/11/01 13:30:58 46E93232 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/11/01 13:30:59 46E93232 c (dvbapi) Demuxer 1 ecmpid 0 CAID: 0E00 ECM_PID: 03D4 PROVID: 000000
2015/11/01 13:30:59 46E93232 c (dvbapi) Demuxer 1 found 1 ECMpids and 3 STREAMpids in PMT
2015/11/01 13:30:59 46E93232 c (dvbapi) Demuxer 1 serving srvid 0384 (0E00@000000:0384 unknown) on adapter 0000 camask 0004 index 0002 pmtpid 03DE
2015/11/01 13:30:59 46E93232 c (dvbapi) Demuxer 1 no suitable readers found that can be used for decoding!
2015/11/01 13:31:03 46E93232 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

Method of Opening PowerVu Channels in Enigma2 Using Oscam

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Registered

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member