Manual [entering biss keys]

[ig0r]

How to enter BISS keys

If you do not have in encodings section BISS
Do so.

Standing on any channel and enter 9339 in any section of the Key edit, prescribe ID 2600 to save and exit, after re-entry will be part BISS, the second option to fill key file which already has a section BISS.
____________________________________________________________
Upload a new SW! score all the transponders, scan channels

click the "i"

1. right, in the top row, there is a line Service ID 0x .... These figures rewrite!
2. LEFT ROW Frequency (frequency transponder) is important too perepesat!
Press EXIT
On the remote dialing digits 9339
In the resulting window

key edit--> OK!


Choose BISS
OK.
See a window with parameters Biss keys


choose not to use a key, press the red button (Edit)

or press the GREEN (Add)


At the prompt, enter the settings appeared to see:

CAID 2600 (no change! "Is a sign of encoding Biss)

Service ID - then enter the previously recorded value of the string when you press the "i"

Freq - then introduce the previously recorded value of the same name string by pressing "i"

Type (skipped)

Key Data - then introduce the key Biss

How to enter key itself:
For example, key in the channel "TET"

CAID - skip
Service ID - enter «17DE (for example)»
(numerical values in digital control buttons, and character (ABCDEF) entered by pressing colored buttons)
buttons and scrolling list of channels (bottom right of the button OK) - Up = A, bottom = B

 

[senadxxx]

How to add CCWs or BISS keys

Instructions on how to add BISS or CCWs keys in the BISS Table through the "Key Edit",explained with pictures (because each number is explained and the number of pictures)!

This is an example that is used by "Key editor for Globo 3xxx-6xxx"

1) Select "BISS" as it says on the picture

2) Click on the Add Key

3) Provider you ServiceID and it will be easiest to find and when you go to a channel by clicking "INFO" and there you see ServiceID in this case is the ID of example Nova TV 000BB8

4) Click on the key, and then when it comes to CCWs key then choose Key16 when it comes to BISS key then choose Key8 and OK

5) Here typing keys that are valid it is,in the first row 16 and then in the second row 16

6) enter the exact frequency channels as in the case of Nova TV 12607

7) You can write what you want (Maradona,Pele or your name) but that you have found it easier to updating it again if a change occurs then put real name as it says on the picture NOVA TV 1°W

8) click "SAVE"

9) then you get above a channel that you added,but at the bottom of the table

10) after going to "file and then" SAVE AS "

Now you can store the key where you want on your PC or save the files over, but you used for adding and editing key!

 

[senadxxx]

Instructions on how to add BISS or CCWs keys in the BISS Table through the "Remote Control",explained with pictures (because each number is explained and the number of pictures)!

This is an example that is used by "Remote Control"

1) If a key is not in all formats go to the channel as it is now a Nona TV and click on Info on the remote and there you have all the information about the channel and even ServiceID needed to enter the place where are the 000000 in this the case for Nova TV is 0x0BB8 = 000BB8

2) enter 9339 and select "Edit Key"

3) Select the coding system "BISS"

4) then click the green button on the remote called "Add" then already beginning to add sequence
-ServiceID = 000BB8
-Freq = 12 607 percent of the examples are for Nova TV
-If you choose CCWs key Key16 shift arrow on the remote up or down, if even one BISS key then just leave Key8,to avoid confusion and CCWs means BISS keys are inserted under the BISS Table
-Then put first 16 numbers that we see in the picture on the table and after that click ok on the remote
Then re-enter the BISS system and drive down to the last key on the table that you add and it should look like that shown in Picture 5

5) move the arrow on the remote to these 16 zeros that are remaining and click Edit and add the other 16 numbers and click OK on the remote

6) Figure 6 shows you that a good check if you're all well written as I indicated with arrows (except that it can not add channel name and this will write "User Entered Key") then if you check all click Exit on the remote

I hope I have explained the procedure at least a little,if anything is unclear feel free to ask for all your problems and concerns we are here to help and to resolve up to that time greeting and enjoy

 

[ig0r]

In the last SW its simple!

Push INFO button --> Red button! You are welcome in BISS key with SID and etc!