LT Images for DM8000HD

Status
Not open for further replies.

marce

VIP
Messages
7,115
LT TEAM ARE PROUD TO PRESENT TO YOU LT6 The Sixth Sense


Code:
yes, we are still alive ;)
We have nearly rewritten the complete LT Image, so it took us some time. Our
priorities has always been our real life and this is also one reason why it
took some time for LT6.

The new image is not dictatorial any more. We have splitted all the LT
plugins from the base image... so YOU can now use this and that LT plugin or
not.

We have a new built in skin for the HD boxes named LT6.HD. We hope, you will
like it like we do.
As a note on the skin, we have left rather much PiG in it for dm800 box and
this might make the skin feel little slow. For future upgrades the dm800
skin might use less PiG to speed it up. For you who likes PiG and do not
care about speed you can change the skin to full PiG.

As you know us, we have again a few new plugins for you.

The first new plugin is named LT Install Wizard. It will be executed the
first time you boot our image. You can remove or add any LT plugin inside
it. After the first boot it will not be shown again on bootup, but you can
reach it in the system menu again.

We have also a new plugin that allows you to switch the PiP channel without
a big patch to DMM's code that some other images are using. After the PiP is
enabled you can toggle between the main window and PiP with the following
buttons:
-New remote control (DM8000): SHIFT+PLAY/PAUSE
-old remote control: SHIFT+TV

Some user didn't find their location in our Weatherman plugin, so we created
a new one: Weather-Channel with some new options and an other look.

We have changed a lot of stuff in many plugins, so we will try to pick only
the important things for the release text:
-Remove LT center screen functions and use DMM's code instead
-Made SNR configurable in the skin (percent or dB)
-New weather icons and new look for Weatherman plugin
-Added possibility to show infos about next event in the channelselection
-Move LT-Configs to dmm-config menu (menu => configuration => system)
-Added reload autofs function to autofs editor
-Made info-button also configurable (not only long-holding info-button)
-Added 'Play CD/DVD' entry to main-menu
-Remove entry DVD Player from main-menu
-Added FileScanner for Audio-CD's
-After starting 'Play CD/DVD' check CD/DVD. Open DVD-Player if a DVD, open
MC-Audio-Player if an Audio-CD and open MC-DVD-Browser if nothing of them
(for DATA-CD's with pics, mp3 or movies)
-InfoBarPositioner: added posibility to move the MoviePlayer InfoBar
-Allow skin to show following things in the ChannelSelection screen:
ServiceName, Orbital, ServiceNameOrbital
-Allow to edit ConfigText configs with the VirtualKeyboard
-Bootup Music plugin uses now gstreamer instead of mpg321
-Many other changes and fixes


Changes MediaCenter:
-Show/play iso files using the DVD-Player plugin
-Calculate some sizes in the media-list
-Added possibility to SHOUTcast to navigate with the number buttons to the
genres (like the channelselection)
-Added some podcast stations. Thx to Zeranovsky
-Show mp4 in media-list and new config: transcode mp4 (yes/no)


Changes QuickMenu:
-Add plugin
-Add script
-Remove entry
-Restore defaults
-Select pre-configured setup
-Save current menu
-Toggle script show type (hidden or shown)
-Add plugin to extensions-menu
-Remove plugin from extensions-menu (this one needs an e2 restart)
-Added move entry function


New in LTEpgGrabber
-AutoGrab - grab from bouquets instead of configs. Select preferred grabbers
and languages and AutoGrab will do the rest.
-The grabber now autodetects when daylight-savings time (DST) changes and
clears cache (no need to edit configs anymore)
-new timezone rules (Use GMT-zone where you are grabbing from...)
-Encoding support for all ISO-8859 standards and utf-8 (first-third byte of
all descriptors text fields)
-Comply with ETSI EN 300 468 v1.9.1 Annex A.2 regarding encoding
-Added support for one-based index (OD) for grabbers
-added possibility to provide "shortInfo" from external grabbers
-support for shortInfo (experimental) in: dagenstv_no and drdk
-new format for grabber-configs


Changes in LTEpgGrabber
-Insert the appropriate language-code in descriptors (not always "swe")
-added execution-time in print-outs and logs
-fixed bug in almost all grabbers were zero-sized file was written in /tmp
and not deleted
-removed init 4 & 3 from grabber-scripts (uses web-if instead)
-ExternalEpg-plugin now uses eEPGCache.load() instead of TryQuitMainloop
(much faster )
-renamed "tvguide.co.uk.xml" to "uk_tvguide.xml"
-renamed "radiotimes.com.xml" to uk_radiotimes.xml

new grabbers:
-xmltv_bleb
-html_dagenstv_no
-html_tvplaneten

new configs:
-nordic_mspc.xml
-nordic_dagenstv_no.xml
-nordic_tvplaneten.xml
-it_ambrosa.xml

New in LTEpgGrab plugin
-Option to save log-file to CF/USB
-Option to grab every (n) days (updates crontab)
-Option to use AutoGrab
-Blue button:
Clear Cache
Edit AutoGrab config
Create Grabber config

you can download the image at home board [URL="http://www.lt-forums.org"]www.lt-forums.org[/URL] and [URL="http://www.ltteam.org"]www.ltteam.org[/URL]

we would like to express our thanks to ghost, tmbinc, and acid_burn
and also all the beta testers for their hard work

We hope, you will enjoy the new LT6 The Sixth Sense images and we wish you a happy new year.


LT6 The Sixth Sense
 

elgeneral

Registered
Messages
7,811
LT Sixth Backup Image for DM8000
mediacenter.jpg

meny.jpg

movieplayer.jpg

osde.jpg

radioem.jpg

dreamload.jpg


Read LT Team info for more informations about changes from LT5 to LT6

Thx to LT Team for this Great Image



Changelog DM8000 BU:
============================
changed all Bootlogos (thx to Stauffie for Bootpics)
changed Radio Pic
changed Spinner (thx to mfgeg)

added:
- Astra19,2/Hotbird13 Settings by Matze
- CCcam 2.1.3
- Oscam 0.99.4svn1036
- Scam 3.57
- CCcaminfo by AliAbdul
- CCpriomaker 0.5
- Meoboot Rev.0.94
- Movie list Preview svn3005
- Movie Splitter 0.1
- Tea Timer 0.1
- Vali King Size HD Skin 4.2
- PornCenter Plugin by AliAbdul
- MyTube Player
- LT WeatherChannel
- LT BootupMusic
- VLC Video Player
- Sat Angels Key Updater
- Fritzcall Plugin by Dr.Best
- Startscript for OScam and CCcam
- Config Files for OScam with HD+
- Dreamload Plugin


removed:
- CrashlogAutoSubmit
- GenuineDreambox
- Satfinder
- RSA and Boxkey in OSCAM Config file

you can use in FLASH with Barry Allen or Meoboot
should be ok in all cases

Gracias a codejunkie
 

juli13

Staff member
Administrator
Messages
10,198
LT6 DM8000 SIXTH SENSE SP1 Image

26.04.2010

LT6 DM8000 SIXTH SENSE SP1

LT TEAM PROUDLY PRESENTS LT6 SIXTH SENSE SP1

WHATS NEW IN SERVICE PACK ONE


* MediaCenter changed default path for movies.
* LT CAM Installer
* Drivers 20100414 for both dm800 and dm8000
* Secondstage #75 for dm800 and #76 for dm8000
* Menus on dm800 should now be faster

Of course there has been lots of other updates/bugfixes to.

Enjoy lt6 sixth sense SP1 please post feed back on our forums.
A big thankyou to all beta testers for their hard work

You can download the image at home board

We would like to express our thanks to ghost, tmbinc, and acid_burn

ENJOY OUR IMAGE: LT TEAM

DOWNLOAD IMAGE

Code:
http://hotfile.com/dl/39894278/f63baef/LT-Sixth.1-dm8000.nfi.html
 

tani1

Staff member
Super Moderator
Messages
17,767
LT6 The Sixth Sense SP2 DM8000HD

Whats new?

Enigma2 20100508

Drivers
dm800/dm8000/dm500hd 20100414
dm7025 dm20100104

Secondstage
dm800/dm8000/dm7025 #76
dm500hd #78

OE 1.5

* dm8000 also new frontprocessor software version #7
* Followed changes in Enigma2.
* LT External EPG in sp1 had a bug when starting using it.
* Some small updates to weather plugins.
* also added missing screens in skin

Code:
http://hotfile.com/dl/42228390/74d4e6d/LT-Sixth.2-dm8000.nfi.html
 

elgeneral

Registered
Messages
7,811
LT6 The Sixth Sense SP4 for DM 8000HD PVR released.

The boot issue on dm500hd should be solved now, already tested on a dm500hd that did not boot on sp3 and it worked.

Else this sp4 is just newer Enigma2 and drivers/secondstage updates.
There is no new LT updates.

Enigma2 20100718

Drivers:
dm7025 20100104
dm800/8000/500hd 20100623

Secondstage:
dm7025/800/8000 #76
dm500hd #79

Download LT-Sixth.4-dm8000.nfii
 

baha2

Super VIP
Messages
6,530
LT6½ OE1.6 for DM8000HD

LT6½ OE1.6 for DM8000HD released (LT revision 3430) - aka LT Six and a half!

REQUIEM FOR…a Dream!!!

Lately things became very hard for most of us in the LT Team regarding personal issues that prevent us from focusing to our main purpose regarding the SAT scene, which is out beloved LT image. We have done too much progress regarding the changes, and the transition from LT5th Campaign to the LT6th Sense was almost flawless. New updates were going public with the use of the Service Packs and bugs that were not revealed during the beta testing era, where eliminated after all. However and apart from our problems, each and every one of us is trying to do its best to keep this "idea" alive and make the Sat community and especially our supporters as happy as possible.
This was supposed to be LT7 but the thing called real life struck us hard, very hard... We then did the best of the situation and here is LT6½ image. It is a LT6 but updated with latest Enigma2 and OE 1.6. LT7 is postponed for the near future till our beloved head graphics designer Nemesis is back. LT7 will have the same structure as LT6½ but with the addition of a new/enhanced skin. Till then…sit back and enjoy our beloved image…

MAJOR CHANGES
Openembedded
OE 1.6

Drivers:
DM8000HD PVR, DM800HD,DM500HD 20100623
DM7025 20100804

Secondstage:
DM8000HD PVR, DM800HD, DM7025 #76
DM500HD #79

Enigma2:
20100930 Experimental

LT revision:
3430

Note 1!
If you have the device connected during boot then it will be mounted by /etc/fstab and in such case mountpoints below will be used. This is for your harddisc and if you choose to use LT Link Manager or LT EPG Cachelink Manager with CF or USB Stick.

Hotplug, devices you insert when Enigma2 is running, is handled by autofs and all thoose devices are mounted at /autofs and use the devicename from /dev like /autofs/sda1

DM8000HD PVR
/dev/hdda1 /media/hdd auto defaults 0 0
/dev/card_sd1 /media/sd auto defaults 0 0
/dev/card_cf1 /media/cf auto defaults 0 0
/dev/card_sm1 /media/sm auto defaults 0 0
/dev/card_ms1 /media/ms auto defaults 0 0
/dev/usb_lower1 /media/usb auto defaults 0 0
/dev/usb_upper1 /media/usb1 auto defaults 0 0
/dev/usb_front1 /media/usb2 auto defaults 0 0
/dev/usb_internal1 /media/usb3 auto defaults 0 0


If you rebuild your dm500hd to activate USB we recommend that you add some kind of over-current protection since otherwise you can destroy your box!

LT Team takes no responsibility for your box if you modify it and be aware that your Warranty will be void.


Note 2!
Since this is image is based on LT7's code the LT Link Manager controlfile is not lt6links.cfg anymore it is now lt7links.cfg

Note 3!
DM7025 image is experimental and might not work yet. No further support for this image will be given.

A big special thanx to all the Beta testers involved! Those are the "behind-the-scene" heroes trying to make us all better: t40t40, Leatherface, Jimdefruit, zumzum, acid-burn, dream_dxb, emitec, psykix, Vlad, Zenox, Zeranovsky, ~Ryu~, AVR-rulez, hassogava, s_a and all the others that i might forget...

Best regards
/LT-Team®

Download
 

tani1

Staff member
Super Moderator
Messages
17,767
First update of LT6½ for DM 8000HD


First update of LT6½. We have followed changes in OE 1.6 with new Linux kernel and Enigma2 updates.
Some tiny changes to our LT External EPG is also included.



Openembedded
OE 1.6

Drivers:
dm7025 20101011
dm800,dm8000 20101013
dm500hd 20101015


Secondstage:
dm800,dm8000,dm7025 #76
dm500hd #80

Enigma2:
20101020 Experimental

LT revision:
3433

NOTE 1!
If you have the device connected during boot then it will be mounted by
/etc/fstab and in such case mountpoints below will be used.
This is for your harddisc and if you choose to use LT Link Manager or LT EPG
Cachelink Manager with CF or USB Stick.

Hotplug, devices you insert when Enigma2 is running, is handled by autofs
and all thoose devices are mounted at /autofs and use the devicename from
/dev like /autofs/sda1

dm8000
/dev/hdda1 /media/hdd auto defaults
0 0
/dev/card_sd1 /media/sd auto defaults
0 0
/dev/card_cf1 /media/cf auto defaults
0 0
/dev/card_sm1 /media/sm auto defaults
0 0
/dev/card_ms1 /media/ms auto defaults
0 0
/dev/usb_lower1 /media/usb auto defaults
0 0
/dev/usb_upper1 /media/usb1 auto defaults
0 0
/dev/usb_front1 /media/usb2 auto defaults
0 0
/dev/usb_internal1 /media/usb3 auto defaults
0 0

dm800
/dev/hdda1 /media/hdd auto defaults
0 0
/dev/usb_lower1 /media/usb auto defaults
0 0
/dev/usb_upper1 /media/usb1 auto defaults
0 0

dm500hd
/dev/hdda1 /media/hdd auto defaults
0 0
/dev/usb_internal1 /media/usb auto defaults
0 0
/dev/usb_external1 /media/usb1 auto defaults
0 0

dm7025 (do not use USB on dm7025)
/dev/sda1 /media/hdd auto defaults
0 0
/dev/sdc1 /media/cf auto defaults
0 0


If you rebuild your dm500hd to activate USB we recommend that you add some
kind of over-current protection since otherwise you can destroy your box!
LT Team takes no responsibility for your box if you modify it!!!!


NOTE 2!
Since this is image is based on LT7's code the LT Link Manager controlfile
is not lt6links.cfg anymore it is now lt7links.cfg

Thx LT Team

rar.gif
LT.Sixth.and.a.half.1-dm8000.nfi
 

marce

VIP
Messages
7,115
LT6½ OE1.6 SP2 for DM8000HD released - New LT Prologue

Code:
This is the Prologue of the New LT image to be released in the very near future. In this image we have followed the Enigma2 Updates and fixes, and we have added support for the new Dreambox DM800se!

We have also done some fixes (minor) about some issues we have been reported.

Openembedded
OE 1.6

Drivers:
dm800/dm8000/dm800se/dm500hd/dm7025 hardware drivers - 20101208

Secondstage:
dm800/dm8000/dm7025 #76
dm500hd/dm800se #80

Enigma2:
20101206 Experimental

Internal LT revision
3448

Enjoy the new image, and feel free to give us feedback for anything you do not like!

Note 1: Since this is image is based on LT7's code the LT Link Manager controlfile
is not lt6links.cfg anymore it is now lt7links.cfg


LT6½ OE1.6 SP2 for DM8000HD released
 

elgeneral

Registered
Messages
7,811
LT6½ OE1.6 SP3 for DM8000 - r3481

Code:
LT6½ OE1.6 SP3 for DM800se released

We have also done some fixes (minor) about some issues we have been reported.

Openembedded
OE 1.6

Drivers:
dm800/dm8000/dm800se/dm500hd/dm7025 hardware drivers - 20101215

Secondstage:
dm800/dm8000/dm7025 #76
dm500hd/dm800se #80

Enigma2:
20110201 Experimental

Internal LT revision
3481

Enjoy the new image, and feel free to give us feedback for anything you do not like!

Note 1: Since this is image is based on LT7's code the LT Link Manager control file
is not lt6links.cfg anymore it is now lt7links.cfg

Gracias a Roulitsas

Download LT.Sixth.and.a.half.3-dm8000.nfi
 

marce

VIP
Messages
7,115
LT6½ OE1.6 for DM8000HD SP4 - (LT revision 3520)

Code:
Openembedded
OE 1.6

Drivers:
DM7025 -20101208
DM800HD, DM500HD, DM800se - 20110309
DM8000HD - 20110315

Secondstage:
DM800HD, DM800se #82
DM8000HD, DM500HD, DM7025 #83

Enigma2:
20110402 Experimental

LT revision:
3520


Notes!!
1. Nothing new in this release. Only updated OE and followed Enigma2 changes.
2. MyTube plugin does not work if started from LT MediaCenter but it does work as standalone plugin. It will be fixed probably in the next release of LT image.

LT6½ OE1.6 for DM8000HD SP4
 

tani1

Staff member
Super Moderator
Messages
17,767
LT6½ OE1.6 for DM8000HD SP5 - (LT revision 3520)

Openembedded
OE 1.6

Drivers:
dm800, dm8000, dm500hd, dm800se 20110504

Secondstage:
dm800, dm800se #82
dm8000, dm500hd #83

Enigma2:
20110506 Experimental

LT revision:
3520


Notes!!

1. MyTube plugin does not work if started from LT MediaCenter but it do work as standalone plugin. It is in the "going to be fixed in future list".

2. No dm7025 since there is issues with OE 1.6 and Ubuntu 11.04 which causes perl-native to not compile and that package is needed.

rar.gif
LT.Sixth.and.a.half.5-dm8000.nfi
 

marce

VIP
Messages
7,115
LT7th OE1.6 for DM8000HD - (LT revision 3563)


Code:
Been some time since we updated the image but now we managed to do it. Our lifes does contain more than Dreambox and to mention some of it, heart-attack, divorce, by-pass operation, unemployment, too much work, children, moving to new house/apartment...

I think you got the picture that Dreambox is not at the top of the list in our lifes right now...

LT6½ actually was LT7 but we added new feature to this image so we decided to make a release of LT7. We have kept the LT6.HD skin as the skin, due to we like it, any skinner out there who wants to make skin? If yes we could add to our download server.

The new cool feature of LT7 is our brand new LT MSN Plugin. Keep contact with your friends on MSN direct on your Dreambox, get notified when you have new email to read. You will get most out of this plugin if you have a DMM keyboard.


Download Here!

Openembedded:
OE 1.6

Drivers:
dm800, dm8000, dm500hd, dm800se, dm7025 20110506

Secondstage:
dm800, dm800se #82
dm8000, dm500hd, dm7025 #83

Enigma2:
20110811 Experimental

LT revision:
3563

Updates:
1. MyTube plugin can again be started from LT MediaCenter
2. Weatherchannel been updated with new html-code
3. UPnp and DLNA support been updated, djmount as DLNA client and uShare or Mediatomb as DLNA servers. Still no LT GUI for Mediatomb so it is only for users who knows how to install things manually and create start/stop scripts (sorry).
4. Latest release version of Gstreamer thanks to Fraxinas at DMM, this is still not in normal CVS image.
5. Listing a directory with many movies in LT MediaCenter was slow but now it is fast again.
6. For you who has DVB-T/C mixed in your dm8000 you might have noticed that default settings did not work properly. There is now a work-around in Enigma2 for this thanks to Acid-burn at DMM.

New:
1. New LT MSN plugin first release!

We hope you enjoy it...as we do!!!

Cheers
Roulitsas/LT-Team


LT7th OE1.6 for DM8000HD - (LT revision 3563)
 

tani1

Staff member
Super Moderator
Messages
17,767
"LT8 Atlantis - The Lost Image" for DM8000HD - (LT revision 3603)
It took us some time to change LT to work with the new License of Enigma2. We had some patches in the back-end of Enigma2 which is now close-source and we could not apply those patches anymore. We updated much of the LT code for it work, so we choose the name this image...

"LT8 Atlantis - The Lost Image"

Let us now look forward and hope that DMM listens to people outside of Germany and adds those functions that people are missing....

OpenEmbedded
OE 1.6

Drivers:
dm800, dm8000, dm500hd, dm800se, dm7020hd 20120202

Secondstage:
dm800, dm8000, dm500hd, dm800se, dm7020hd #84

Enigma2:
20111110 rel3.2

Enigma2-Plugins:
20120208 master

LT revision:
3603

Updates:

When using LT External EPG on HDD it was not correct identified which cause Enigma2 to use normal epg.dat.

LT Addons could miss downloading dependencies.

uPnp and DLNA support been updated, djmount as DLNA client and uShare or Mediatomb as DLNA servers. Still no LT GUI for Mediatomb so it is only for users who knows how to install things manually and create start/stop scripts (sorry).

LT External EPG is still working although Enigma2 code is close, we have rewritten LT code.

LT Linkmanager is now using lt8links.cfg and not lt7links.cfg


Important note:

Before installing and if you have used LT External EPG you must remove your old dat file else you will have a crashing image due to old dat format is not compatible with new Enigma2.

Before installing this image please read information at:

http://www.dreamboxupdate.com

Known Issues:

2SUB Not working in Enigma 3.2 images (so it ain't working in LT8 also).

Download
 

henk12

Registered
Messages
87
LT8 Atlantis - The Lost Image" for DM8000HD - (LT revision 3611)



Openembedded
OE 1.6

Drivers:
dm800 20120216
dm8000, dm500hd, dm7020hd 20120322
dm800se 20120328

Secondstage:
dm800, dm8000, dm500hd, dm800se #84
dm7020hd #86

Enigma2:
20120327 rel3.2

Enigma2-Plugins:
20120410 master

LT revision:
3611

Updates:

•* show LT-linked devices in LTDeviceManager too
* LT External EPG Grabbers updates

Known Issues:

•* 2SUB Not working in Enigma2 rel3.2 images.

Important note
* Teletext subtitles are updated in Enigma2 so they work better nowdays but you still need to activate it on every channel you want it.

DOWNLOAD LINK
 

juli13

Staff member
Administrator
Messages
10,198
"LT8 Atlantis - The Lost Image" SP2 for DM8000HD - (rev. 3618)

Latest updates for LT Images

"LT8 Atlantis - The Lost Image" SP2 for DM800 - (LT revision 3618)

Release Text:
LT8 SP2 is still an OE 1.6 based image but we are working on OE 2.0 and you will find a LT based on OE 2.0 later.
The new LTSubtitle was the reason for not waiting for OE 2.0 but instead we decided to release it now.
You can now get automatic subtitle as you had with 2SUB before and also change font style, font size on the fly.




Openembedded
OE 1.6

Drivers:
dm800 20120216
dm8000, dm500hd, dm7020hd 20120322
dm800se 20120328


Secondstage:
dm800, dm8000, dm500hd, dm800se #84
dm7020hd #86

Enigma2:
20120327

Enigma2-Plugins:
20120501 OE1.6LAST

LT revision:
3618

Updates:


Added LTSubtitle, Select font and it's properties at runtime. Autostart subtitle when available.


DOWNLOAD
 

tani1

Staff member
Super Moderator
Messages
17,767
pre - LT9 (Public Beta Test Image)

LT Team releases this public beta-test image for all our fans out there that wish to participate.

Feel free to download and test to your boxes. For now, only DM8K and DM7020HD versions are available.


Openembedded: OE 2.0

Drivers: dm8000, dm7020hd 20120711

Secondstage: dm8000 #84, dm7020hd #86

Enigma2: 20120714

Enigma2-Plugins: 20120724 master

LT revision: 3661

LT Update(s):
Known Issue(s):
Important note(s):

Enjoy and thank you!!!

Download
 

tani1

Staff member
Super Moderator
Messages
17,767
pre - LT9 (Public Beta v2 Test Image) for DM8000HD PVR

Latest updates for LT Images

This is a public beta image for testing purposes only!!! Feel free to test to your E2 capable Dreamboxes. Due to flash memory lack to lower models, some of the pre-installed LT-Addons are not in the image. Download what you want with caution in order not to be run out of memory to your receivers, or you will have to re-install from scratch.

If you like, give us feedback in order to make this image better.

Once again, i would like to remind to all our fans out there, that a new skin is NOT a new image, and a new image doesn't always have to carry a new skin!!!

Openembedded:
OE 2.0

Drivers:
dm800 20120518
dm500hd, dm800se, dm8000, dm7020hd 20120711

Secondstage:
dm500hd, dm800, dm800se, dm8000 #84
dm7020hd #86

Enigma2:
20120727

Enigma2-Plugins:
20120808 master

LT revision:
3666

LT Update(s):
Known Issue(s):
Important note(s):

Thx LT Team

Download
 

mr.strauss

Registered
Messages
8,414
"LT9th for DM8000HD PVR" - LT Revision (3683)

"LT9th for DM8000HD PVR" - LT Revision (3683)

Latest updates from LT Team...!!!

Release Notes:

Due to flash memory lack to lower models, some of the pre-installed LT-Addons are not in the image. Download what you want with caution in order not to be run out of memory to your receivers, or you will have to re-install from scratch.

Once again, i would like to remind to all our fans out there, that a new skin is NOT a new image, and a new image doesn't always have to carry a new skin!!!
wink.png


Openembedded:
OE 2.0

Drivers:
dm800 20120518
dm500hd, dm800se, dm8000, dm7020hd 20120711

Secondstage:
dm500hd, dm800, dm800se, dm8000 #84
dm7020hd #86

Enigma2:
20120912

Enigma2-Plugins:
20120913 master

LT revision:
3683

LT updates:
Removed LTDjMount and LTUshare plugins. (uShare and djmount does not exist
in OE 2.0 since uPnP is now part of Enigma2)
News in LTExternalEPG:
- Now using eTimer instead of crontab (No need to restart enigma2
enabling/disabling LTExternalEPG)
- Use <> in option "Grabbing Time" to start "EPG Timer Selection"
- Removed option "Grab every n days" (not needed anymore)
- New option to save log as xml (crashlog-like)
- Fixed bug where FATAL error didn't count grabbed channels correctly.
- New xmltv-grabber tvzon
- removed unavailable grabbers and grabber-configs
* dagenstv_no
* hallandsposten
* vg
* nova
* ambrosa
- updated grabber_db.xml.gz

Important note(s):
If you use ltlinks, be aware that the configuration file is now called lt9links.cfg and please start with a fresh one!

Known issue(s):

Download for DM8000HD PVR

2vxlgg0.jpg

 

baha2

Super VIP
Messages
6,530
LT9th SP1 for DM800HD - LT Revision (3688)

Release Notes:

This is the last LT Image for the year 2012... The LT Team is here again to remind to all of you out there (fans and not), that we are not gone. We might be away for a while but we will always give a sign that we exist. Some people should have paid more attention to those that all those years supported them, and gave them the heart that "beats" inside their boxes. We don't complain, we don't forget... we thank you all and we show respect. May the future bring back the interest to those that are the soul of the scene, and will never been forgotten!

Merry Christmas to all of you and your families, and have a Happy New Year!!!!

Openembedded:
OE 2.0

Drivers
:
dm800 20120518
dm500hd, dm800se, dm8000 20120711
dm7020hd 20121108

Secondstage:
dm500hd, dm800, dm800se, dm8000 #84
dm7020hd #86

Enigma2:
20120925

Enigma2-Plugins:
20121116 master

LT revision:
3688

LT updates:
- Added new LT Picon Manager addon, not loaded default so manual installation needed.

Known issue(s):

Important note(s):

LT.Ninth.1-dm8000.nfi

Thx @Roulitsas
 
Status
Not open for further replies.
Top