Logging update our receivers by The Last Drakkar tool
This description is intended to capture a software update, which is sended in stream by the provider, that is public data
[COLOR="#RoyalBlue"]1.[/COLOR] Run the program and go to the [COLOR="#RoyalBlue"]"Logger"[/COLOR] tab
[COLOR="#RoyalBlue"]2.[/COLOR] In the [COLOR="#RoyalBlue"]"Telnet connection settings"[/COLOR] table:
- In the 'Host' enter 'IP' our receiver
- In the 'Port' enter the port that will connect to, default is '23'
- In the 'Login' enter login we use to connect to the receiver, default is 'root'
- In the 'Pass' type the password, of course, if we gave them and mark
- In the 'Scan' select [COLOR="#RoyalBlue"]'SoftDump'[/COLOR]
[COLOR="#RoyalBlue"]3.[/COLOR] Click [COLOR="#RoyalBlue"]"Get PIDs"[/COLOR], and after scan will show us the PIDs and the names of receivers/ID software, or you will only see PIDs, we choose what we are interested in by clicking on the name in
[COLOR="#RoyalBlue"]4.[/COLOR] In the [COLOR="#RoyalBlue"]"Export results to"[/COLOR] we must remember that we can only save in the .bin or .txt file to the hard disk of our PC
[COLOR="#RoyalBlue"]5.[/COLOR] Also you must show where to save the file by clicking the [COLOR="#RoyalBlue"]"File Location"[/COLOR]
[COLOR="#RoyalBlue"]6.[/COLOR] Click [COLOR="#RoyalBlue"]"Start"[/COLOR]
Brief description of the "SoftDump types" :
SoftDump - logging software
SoftDump types - how is sended software
Block - This feature log software that is sent in the form of blocks of data
Block - Hard & Slow - software in the form of blocks of data captured at a lower level (transport stream) when the data on normal levels are not available, it takes more time
Check Dump - This function checks if the file is captured all, if not, the Drakkar logg missing data blocks and connects with other logged blocks to correct whole
Dump from 0 to last - This function works when we try to logg after its started sended, then the tool will wait and start from zero to end
CA msg - the update is sent in the form of data , similar to the emm/ecm conditional access in the same stream
CA msg - Hard & Slow - the same function as the Block, capturing at a lower level
sort msg - this put together captured data in order from 0 to F ( HEX )
Dump Till Rec Repeat - the program will logg until the data log will not be repeated
We have to remember to switch the receiver on our channel/transponder where the operator sends an update, if you do not know can search manually but it's fun, it will take us a while
The program scans the sometimes few moments PIDs because he scan precisely
If the option "CA msg" we dont mark "sort msg" or "Dump Till Rec Repeat" program will be so long logg until we hit the "Stop"
The logging software has been added for educational purposes, the program The Last Drakkar does not change in any way logged data
Downloading or modifying the captured software at your own risk
This description is intended to capture a software update, which is sended in stream by the provider, that is public data
[COLOR="#RoyalBlue"]1.[/COLOR] Run the program and go to the [COLOR="#RoyalBlue"]"Logger"[/COLOR] tab
[COLOR="#RoyalBlue"]2.[/COLOR] In the [COLOR="#RoyalBlue"]"Telnet connection settings"[/COLOR] table:
- In the 'Host' enter 'IP' our receiver
- In the 'Port' enter the port that will connect to, default is '23'
- In the 'Login' enter login we use to connect to the receiver, default is 'root'
- In the 'Pass' type the password, of course, if we gave them and mark
- In the 'Scan' select [COLOR="#RoyalBlue"]'SoftDump'[/COLOR]
[COLOR="#RoyalBlue"]3.[/COLOR] Click [COLOR="#RoyalBlue"]"Get PIDs"[/COLOR], and after scan will show us the PIDs and the names of receivers/ID software, or you will only see PIDs, we choose what we are interested in by clicking on the name in
[COLOR="#RoyalBlue"]4.[/COLOR] In the [COLOR="#RoyalBlue"]"Export results to"[/COLOR] we must remember that we can only save in the .bin or .txt file to the hard disk of our PC
[COLOR="#RoyalBlue"]5.[/COLOR] Also you must show where to save the file by clicking the [COLOR="#RoyalBlue"]"File Location"[/COLOR]
[COLOR="#RoyalBlue"]6.[/COLOR] Click [COLOR="#RoyalBlue"]"Start"[/COLOR]
Brief description of the "SoftDump types" :
SoftDump - logging software
SoftDump types - how is sended software
Block - This feature log software that is sent in the form of blocks of data
Block - Hard & Slow - software in the form of blocks of data captured at a lower level (transport stream) when the data on normal levels are not available, it takes more time
Check Dump - This function checks if the file is captured all, if not, the Drakkar logg missing data blocks and connects with other logged blocks to correct whole
Dump from 0 to last - This function works when we try to logg after its started sended, then the tool will wait and start from zero to end
CA msg - the update is sent in the form of data , similar to the emm/ecm conditional access in the same stream
CA msg - Hard & Slow - the same function as the Block, capturing at a lower level
sort msg - this put together captured data in order from 0 to F ( HEX )
Dump Till Rec Repeat - the program will logg until the data log will not be repeated
We have to remember to switch the receiver on our channel/transponder where the operator sends an update, if you do not know can search manually but it's fun, it will take us a while
The program scans the sometimes few moments PIDs because he scan precisely
If the option "CA msg" we dont mark "sort msg" or "Dump Till Rec Repeat" program will be so long logg until we hit the "Stop"
The logging software has been added for educational purposes, the program The Last Drakkar does not change in any way logged data
Downloading or modifying the captured software at your own risk