bigfoot007
Registered
- Messages
- 49
I have a problem getting my IPBOX9000 latest NLB image (ip: 192.168.1.36) to connect to an external PC running XP Pro (ip: 192.168.1.39) with a CAS2 running as a phoenix card reader (SlyUK card).
I am using newcs 1.50 due to the alleged *** handling.
I start newcs and get the following:
Reading Config file from newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 16:09:58 ] [ Box detect ] Windows XP Build 2600
[ 16:09:58 ] [ Config ] Value in <boxkey> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 16:09:58 ] [ Config ] Value in <ipk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 16:09:58 ] [ Config ] Value in <ucpk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 16:09:58 ] [ Config ] Pincode for device 0 (Phoenix Interface): 0000
[ 16:09:58 ] [ Config ] COM1 ECM priority: round
[ 16:09:58 ] [ EMM Cache ] Initialising Cache with 20 entries
[ 16:09:58 ] [ ECM Cache ] Initialising dynamic Cache
[ 16:09:58 ] [ Loader ] Starting Telnet on port 1001
[ 16:09:58 ] [ Loader ] Reader type 2 on node COM1
[ 16:09:58 ] [ Phoenix ] Opening device COM1
[ 16:09:58 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 16:09:58 ] [ Phoenix ] Setting 1 Stop bit on node COM1
[ 16:09:58 ] [ Phoenix ] Setting baud to 9600
[ 16:10:00 ] [ Loader ] Clearing all autosids on reader ...
[ 16:10:00 ] [ ATR ] T=0 1etu=26.04us Guardtime:15etu WWT:38400etu
[ 16:10:00 ] [ ATR ] Historical bytes: 3 [B0] [06] i [FF] J P [D0] [00] [00] S Y [00] [00] [00]
[ 16:10:00 ] [ Loader ] Init *** card
[ 16:10:00 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 16:10:00 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 16:10:00 ] [ Phoenix ] Setting baud to 38400
[ 16:10:01 ] [ Keyman ] Adding key F8F3CC type 0 on Provider 000000 for caid 0000 ID=2401
[ 16:10:01 ] [ Keyman ] Adding key F8F300 type 0 on Provider 000001 for caid 0000 ID=2401
[ 16:10:02 ] [ Loader ] Card 0961 on port COM1 ready
[ 16:10:02 ] [ Loader ] Starting Newcamd Server on port 15000
using the following xml:
<newCSconfig>
<readers name="Phoenix">
<device>
<name>Phoenix Interface</name>
<type>phoenix</type>
<mhz>357</mhz>
<node>COM1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0003585914</boxkey>
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server> <!-- Port to accept connections on -->
<port>9000</port>
<enabled>yes</enabled>
</server>
<user>
<name>root</name>
<password>relook</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>localhost</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
</newcamdserver>
</newCSconfig>
when I restart mgcamd 1.31 using the following:
CWS_KEEPALIVE = 300
CWS = 127.0.0.1 32100 ip9000 nlbimage 11 12 13 14 15 16 17 18 19 10 11 12 13 14
CWS = 127.0.0.1 32101 ip9002 nlbimage 11 12 13 14 15 16 17 18 19 10 11 12 13 14
CWS = 192.168.1.39 15000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
and mg_cfg:
M: { 02 }
C: { 02 }
A: { 00 }
U: { 05 }
T: { 00 }
G: { 09 }
N: { 04 } 05 30
K: { 30 }
Q: { 30 }
P: { 00}
O: { 00 }
S: { 00 } 80
L: { 02 }
E: { 00 }
H: { 00 }
R: { 07 }
D: { ff }
B: { 00 }
the info file shows:
newcamd route 0000:ip9000:127.0.0.1:32100:newcs EMM ON online
newcamd route 0000:ip9002:127.0.0.1:32101:newcs EMM ON online
newcamd route 0000:dummy:192.168.1.39:15000:newcs EMM ON online
and the newcs server has one line appended:
[ 16:11:38 ] [ Newcamd:15000 ] User dummy logged in, client: Mgcamd
But when I switch to scrambled channel I get no communication between the box and PC.
I need help on this one!
I am using newcs 1.50 due to the alleged *** handling.
I start newcs and get the following:
Reading Config file from newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 16:09:58 ] [ Box detect ] Windows XP Build 2600
[ 16:09:58 ] [ Config ] Value in <boxkey> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 16:09:58 ] [ Config ] Value in <ipk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 16:09:58 ] [ Config ] Value in <ucpk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 16:09:58 ] [ Config ] Pincode for device 0 (Phoenix Interface): 0000
[ 16:09:58 ] [ Config ] COM1 ECM priority: round
[ 16:09:58 ] [ EMM Cache ] Initialising Cache with 20 entries
[ 16:09:58 ] [ ECM Cache ] Initialising dynamic Cache
[ 16:09:58 ] [ Loader ] Starting Telnet on port 1001
[ 16:09:58 ] [ Loader ] Reader type 2 on node COM1
[ 16:09:58 ] [ Phoenix ] Opening device COM1
[ 16:09:58 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 16:09:58 ] [ Phoenix ] Setting 1 Stop bit on node COM1
[ 16:09:58 ] [ Phoenix ] Setting baud to 9600
[ 16:10:00 ] [ Loader ] Clearing all autosids on reader ...
[ 16:10:00 ] [ ATR ] T=0 1etu=26.04us Guardtime:15etu WWT:38400etu
[ 16:10:00 ] [ ATR ] Historical bytes: 3 [B0] [06] i [FF] J P [D0] [00] [00] S Y [00] [00] [00]
[ 16:10:00 ] [ Loader ] Init *** card
[ 16:10:00 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 16:10:00 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 16:10:00 ] [ Phoenix ] Setting baud to 38400
[ 16:10:01 ] [ Keyman ] Adding key F8F3CC type 0 on Provider 000000 for caid 0000 ID=2401
[ 16:10:01 ] [ Keyman ] Adding key F8F300 type 0 on Provider 000001 for caid 0000 ID=2401
[ 16:10:02 ] [ Loader ] Card 0961 on port COM1 ready
[ 16:10:02 ] [ Loader ] Starting Newcamd Server on port 15000
using the following xml:
<newCSconfig>
<readers name="Phoenix">
<device>
<name>Phoenix Interface</name>
<type>phoenix</type>
<mhz>357</mhz>
<node>COM1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0003585914</boxkey>
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server> <!-- Port to accept connections on -->
<port>9000</port>
<enabled>yes</enabled>
</server>
<user>
<name>root</name>
<password>relook</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>localhost</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
</newcamdserver>
</newCSconfig>
when I restart mgcamd 1.31 using the following:
CWS_KEEPALIVE = 300
CWS = 127.0.0.1 32100 ip9000 nlbimage 11 12 13 14 15 16 17 18 19 10 11 12 13 14
CWS = 127.0.0.1 32101 ip9002 nlbimage 11 12 13 14 15 16 17 18 19 10 11 12 13 14
CWS = 192.168.1.39 15000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
and mg_cfg:
M: { 02 }
C: { 02 }
A: { 00 }
U: { 05 }
T: { 00 }
G: { 09 }
N: { 04 } 05 30
K: { 30 }
Q: { 30 }
P: { 00}
O: { 00 }
S: { 00 } 80
L: { 02 }
E: { 00 }
H: { 00 }
R: { 07 }
D: { ff }
B: { 00 }
the info file shows:
newcamd route 0000:ip9000:127.0.0.1:32100:newcs EMM ON online
newcamd route 0000:ip9002:127.0.0.1:32101:newcs EMM ON online
newcamd route 0000:dummy:192.168.1.39:15000:newcs EMM ON online
and the newcs server has one line appended:
[ 16:11:38 ] [ Newcamd:15000 ] User dummy logged in, client: Mgcamd
But when I switch to scrambled channel I get no communication between the box and PC.
I need help on this one!