Latest Version of Mbox
- Thread starter bliner
- Start date
- Status
Mbox Sh4
Info:
Info:
Code:
This is not a finished project but it's a start. (beta version)
Mbox is next generation Gbox.
With this version you can not Reshare cards (yet) !!!
You can add Newcs connections (no cs2gbox needed)
You can use your old cwshare.cfg (same D line or use the new format)
[B]To start you need to start it like this:[/B]
cd /data/emu
./mbox.sh40
Don't forget to correct the settings in the mbox.cfg file
(this must be in the same dir as mbox.sh40)
Set D to 3 for UFS910.
[B]Note:[/B]
- restart mbox works only on a free channel or when rebooting.
(will be fixed later)
- don't start first another emu. (start kahtrein with no emu then
start mbox or start box with mbox)
- Messages
- 6,174
05.09.2008
==========
-Fix problem when received CWs are zeros and not rejecting them.
-Fix problem loosing cards when new Hello messages received.
-Fix problem with many same cards in share.info file.
-Fix problem with ECM timeout intervals.
-Default path for for mbox.cfg is /var/keys/, for other paths you must start mbox with path as argument.
thx to mower and rest of the mbox team
==========
-Fix problem when received CWs are zeros and not rejecting them.
-Fix problem loosing cards when new Hello messages received.
-Fix problem with many same cards in share.info file.
-Fix problem with ECM timeout intervals.
-Default path for for mbox.cfg is /var/keys/, for other paths you must start mbox with path as argument.
thx to mower and rest of the mbox team
- Messages
- 6,174
07.09.2008
==========
-Minor newcamd code optimization.
-Improved irdeto chid handling.
-Now no need to select again channel on start ro read PMT table.
-Fix minor problem when sending ECM.
-No default path for mbox.kill, so now create mbox.kill file where T: path is.
-Fix problem starting mbox without argument and with default mbox.cfg path /var/keys/
==========
-Minor newcamd code optimization.
-Improved irdeto chid handling.
-Now no need to select again channel on start ro read PMT table.
-Fix minor problem when sending ECM.
-No default path for mbox.kill, so now create mbox.kill file where T: path is.
-Fix problem starting mbox without argument and with default mbox.cfg path /var/keys/
Mbox Sh4
08.09.2008
-Added C line priority in mbox.cfg file H: option.
-Added pid.info
-No more need for M and D line to use only C line(s).
-Fix problem: deleting mbox.kill file afer exit.
second update 08.09.2008
08.09.2008
-Added C line priority in mbox.cfg file H: option.
-Added pid.info
-No more need for M and D line to use only C line(s).
-Fix problem: deleting mbox.kill file afer exit.
second update 08.09.2008
Code:
-Fix problem I: line
Last edited by a moderator:
Mbox Sh4
Code:
10.09.2008
-Fix problem: starting mbox on windows with argument.
-Added fake? pids for Digiturk 0x0D00 (0x04CC,
0x04BB,0x0575,0x0583,0x04A2,0x05AE,0x04C6,
0x04D6,0x0549,0x04EA,0x0496,0x0C81,0x0C99,
0x04C9,0x048C,0x04DD,0x049C,0x0490,0x0C91,
0x0C93,0x04B2,0x0488).
-Added option to change I,X,O,N line ,to delete running D line ,
to add new D line(without filter rules),to resend "R" hello msg to
all peers while mbox is running. Write new values in "add.data"
file and put it in folder from P: line.
[B]NOTE:[/B] Max time to wait before changes take affect is 2
minutes, new values for I,X,O,N will not be saved in cwshare.cfg
but new D line will be saved. "add.data" file will be deleted after
reading (read add.data.example) !Mbox II v 11.09.2008
Code:
-Added mbox.ver file(in T: path) for writing current mbox version like this ("0.2 BETA (11.09.2008)");
-Added code to show message if someone trying to add C line but not having at least one C line in cwshare.cfg when mbox was started.
-Fix problem saving new C line from add.data to cwshare.cfg file
-Fix problem with few irdeto channels on Digiturk.
-Fix problem decoding AC3 pid.11.09.2008 second update
========================
========================
Code:
-Again fix problem for few irdeto channels on Digiturk
-Added mbox.ver file(in T: path) for writing current mbox version like this ("0.2 BETA (11.09.2008)");
-Added code to show message if someone trying to add C line but not having at least one C line in cwshare.cfg when mbox was started.
-Fix problem saving new C line from add.data to cwshare.cfg file
-Fix problem with few irdeto channels on Digiturk.
-Fix problem decoding AC3 pid.Mbox v3 16.09.2008
Code:
16.09.2008
==========
-Added resharing code.You cant use yet your local card with newcs+mbox for resharing ,still just for local watching!!!.
-Added recording for DM boxes.(not tested).
-Added code for caching DCW(on every peer DCW are cached).
-Added mapping CaIDs 0x0B01,0X0B02,0X0B03 to 0x0B00(not tested).
-Remove reading forbiden SID pids from C line.Now you must make file called "port.list" in K: path. "Port" is newcs listening port,so if newcs is listening on port 12000 ,file will be called 12000.list.
Read 12000.list.example for more info. Pls use SID pids , CHIDs for Irdeto or G line , because now mbox send only one ECM and wait response from newcs before it send new ECM.
-Fix small memory problem.
-Fix crashing on exit.
-Fix problem for some via2 channels.
-Fix problem with reading X line from cwshare.cfg.
Code:
http://rapidshare.com/files/145851220/mbox_all.rar.html
B
boxgot
Mbox v3 17.09.2008
- Status