description of software v 1.17.63 dated 26 May 2009.
Assigning ID encoding a particular channel, a new feature Submit ID on the list of K @ S. ..
a) In the new version of software. added bind ID to the channel ... How does this function:
1 - to start you need to add the channel to which you want to assign the CAID / PROV ID
2 - entry in the menu K @ W the same menu-8282-"blue" button (now the menu is called IDENT)
3 - in the menu K @ W, click on "yellow" button in the window, select the correct CAID / PROV ID and then click "OK" (Channel ID will have to enter manually, or to correct 00 00 00 which gives the receiver).
4 - get out of the emulator menu "Exit"
5 - when the channel press and hold 2-3 seconds, click "Exit"
6 - in the window select the desired ID and zhmete "OK" (the window will show only those ID that you previously chose in the menu ID "yellow button").
7 - all the channels with the same CAID / PROV ID can bind not going to emu K @ V (see para 5-6)
Attention! depending on the number of identity and diversity coding systems to bind the channels, the time of attachment may be from 1 to 15 seconds, do not rush!
- If the channel does not open after attachment, you can enable the receiver to pick his own, for which:
- Press and hold 2-3 seconds, click "exit"
- In winning the window choose No and click OK.
in the new software is still a normal K @ W + Syfra provider needed emu on the menu to add a new slot SECA (0100) PROV 00000068
b) to the numerous requests back to its former status indicators signal levels / quality
c) Fixed bug with the "escape" antenna system, which is set by protocol DiseqC 1.2 and has an additional stationary antenna mounted on a protocol DiseqC 1.0
g) when setting the turning of a long button press <<**** initiates the continuous movement of the antenna, if you signal the motor stops (you need at the beginning of the search set 100% accurate data workshop desired satellite transponder).