dm800/dm8000/dm800se/dm500hd:
- tune to symbol rates < 1000ksyms now works like old linuxtv api again
- fixed dvb-s2 linuxtv api capabilities
- vtuner fixes/speedups, add vtuner acceleration support
- fixed picture dropouts seen on some h264/mpeg services (buffer underruns)
- fixed rare PAT timeout problems after deepstandby wakeup
[B]only dm800se:[/B]
- fixed deepstandby wakeup with the (additionally purchasable) omikron plus remote control
[B]all:[/B]
- fixed bcm4505/06 signal problems after few seconds on Astra 19.2 tp 11914H 27500 9/10
dm800/dm8000/dm800se/dm500hd:
- tune to symbol rates < 1000ksyms now works like old linuxtv api again
- fixed dvb-s2 linuxtv api capabilities
- vtuner fixes/speedups, add vtuner acceleration support
- fixed picture dropouts seen on some h264/mpeg services (buffer underruns)
- fixed rare PAT timeout problems after deepstandby wakeup
only dm800se:
- fixed deepstandby wakeup with the (additionally purchasable) omikron plus remote control
all:
- fixed bcm4505/06 signal problems after few seconds on Astra 19.2 tp 11914H 27500 9/10
-do more work on "rare PAT timeout problems after deepstandby wakeup"
- fixed pcr problems (fixes frequently deformed live audio output on dm500hd/dm800se)
- fixed small demux problem (dm8000/dm500hd/dm800se)
20110215-r0
dreambox-dvb-modules.bb: update dm800/dm8000/dm500hd/dm800se hardware drivers
all
- add support for two vtuners
- use linuxtv api dvr devices instead of proprietary pvr device(s) .. this is later needed for better ts streaming support
- small pcr fix
- fixed small demux bug to prevent packets from previous running service in recorded ts streams
dm800se/dm500hd:
- updated audio/video decoder, video output, demux and hdmi output code
dm8000:
- updated video decoder, video output, demux and hdmi output code
take care this driver update needs at least 2nd stage loader #81
- reentrancy fixes in demux and video/audio clip mode (fixed frequently kernel oops)
- revert to previous video output, hdmi and video decoder code ( this should fix some problems introduced with 20110215 drivers
- hotfix freeze after some channel changes
- throttled mpeg decoder debug output a bit
- fixed bcm4506 tuner crash (no hab ack messages in kernel debug)
- fixed bcm4506 manual LDPC FEC modes
- fixed readback of current pilot state for dvb-s2 frontends (needs a linuxtv api fix)
- readback corrected symbolrate and frequency for bcm4501 and bcm4506
- cxd1981 DVB-C optimizations