Last patched drivers for dm800 sim 2.01

G

gregy1

Member
Messages
51
Can anyone put here (@rami or @mfaraj) last patched drivers from 16.02.2012. for dm800 sim 2.01 in ipk. format?I needed for last Open Pli,everthing works ok but Image does not recognize tuner because of orignal drivers.SSL is patched 84b.Thanks in advance.regards...
 
M

MastaG

Member
Messages
72
gjstroom releases openli images for sim2 (dm800hd and dm800se) on regular base.
According to his latest build for dm800 sim2:
OpenPLi-2.1-beta-dm800-20120402#SSL84b by gjstroom

Bootloader: sim201-ssl84b
Source: 02.04.2012
Drivers: 2012-02-16 (bcm7401.ko date 2011-11-09)
Skin: PLi-HD
Plugins: OpenWebif
Size: 42.8 MB
Click to expand...

You can flash the latest nightly from openpli.org.
Then when it's done flashing do not reboot but open the webinterface again and flash sim2 ssl84b.
Now you can reboot.
Then replace bcm7401.ko with the one from the original 2011-11-09 dmm drivers.

They dont need to be patched.
That's why sim2 rulez them all ;)

I bet SSL84c will be released soon with support for official 2012-02-16 drivers.
 
C

chab7

Senior Member
Messages
131
...or why don't you flash gjstroom's latest pli image? You can use online update with this release to get the freshest openpli image on clone boxes.
 
P

piato

Registered
Messages
23
I need the patched drivers for the dm800se tuner (clone) .
After a wrong step...(uninstall of the TS panel) i loose my tuner!!!
WITH EVERY IMAGE NOW I HAVE UNFORTUNATELY this :"TUNER A: empty"
I think the tuner is the bcm4505.

Thanks
 
Last edited:
G

gregy1

Member
Messages
51
piato said:
I need the patched drivers for the dm800se tuner .
After a wrong step...(uninstall of the TS panel) i loose my tuner!!!
WITH EVERY IMAGE NOW I HAVE UNFORTUNATELY this :"TUNER A: empty"
I think the tuner is the bcm4505.

Thanks
Click to expand...
As I know tuner is bcm7401.ko and than trai these new link.Like you see the uper posts I have the same problem on last Open PLI nightly build(empty tuner) untill I put over the Total comander bcm7401.ko driver in /lib/modules/2.6.18-7.4-dm800/extra folder and now runnig just fine.Regards...
https://hotfile.com/dl/155949920/f0390ce/bcm7401.rar.html
 
P

piato

Registered
Messages
23
I think that the problem with the EMPTY TUNERS is coming from THE POWER SUPPLY.
Today i will test it .............
 
B

Brummie

Staff member
Administrator
Messages
5,794
piato said:
I need the patched drivers for the dm800se tuner (clone) .
After a wrong step...(uninstall of the TS panel) i loose my tuner!!!
WITH EVERY IMAGE NOW I HAVE UNFORTUNATELY this :"TUNER A: empty"
I think the tuner is the bcm4505.

Thanks
Click to expand...

take the lid off your 800SE and push the tuner in so its flush,then your should see the tuner,if not flash an early image and try that.
 
P

piato

Registered
Messages
23
All i need are "DM800SE Clone 2.1 patched-DVB-Modules"
Where can i find
-the patched drivers for the 800se 2.1 clone??
-the patched OR THE ORIGINAL drivers for the BCM4505 tuner????
 
Last edited:
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,552
piato said:
All i need are "DM800SE Clone 2.1 patched-DVB-Modules"
Where can i find
-the patched drivers for the 800se 2.1 clone??
-the patched OR THE ORIGINAL drivers for the BCM4505 tuner????
Click to expand...

The drivers are included in every patched image available for the 800SE. Original tuner driver will not work on a se clone.
 
P

piato

Registered
Messages
23
I must flash with the first image of the receiver.
The problem is that i have not the backup of this first image.
Was blackhole-ramimaher January 2012......
 
You must log in or register to reply here.
Top