Illusion Latest Firmwares

[marokino08]

Atlas_DongleSoftware_D1_08

Fixed : (Atlas/Atlas-E/M3S2) Improved compatibility with other receivers, when Atlas is in dongle mode.

Fixed : (Atlas/Atlas-E/M3S2) Improved RS232 speed, now when zapping through channels, Atlas dongle is much faster than before.Added : (Atlas/Atlas-E/M3S2) A new data format, so from now on, only those who apply this version will be able to see the servers: S1-2, S1-3, S1-4, S2-2, S2-3.

 

[kargo.25]

D 1.09 beta pour atlas dongle

 

[marokino08]

02.06.2011

Atlas DongleSoftware D1.09

Fixed : (Atlas/Atlas-E/M3S2) Compatibility with receivers that had problems with the previous version.

 

[kargo.25]

Atlas DongleSoftware D1 09 V2

As promised here is a V2 version of D1.09 to only correct the problem described by the previous posts. If you do not have these problems you do not have to do this update. It was tested with a super starsat 1200d. The test lasted more than 24 hours!

 

[bozomustafa_68]

Atlas_MainSoftware_A2_39

Hi everybody, the new version of KYNG Software is available in the downloads section it's version A2.39.
Fixed : (All Models) Conflict between French TNTSAT provider Emu and Canal+ channels.
Added : (All Models) Emu support for some additional channels on Astra 19°E, the channels are those that belong to these transponders: 11739 V and 11778 V.
Added : (All Models) As you may know, another Omnia file has been released, but it opens only AB Sat channels, so implemented on the receiver the necessary Algos to open as well C+/Csat channels. All you have to do is update your Omnia Card through the Smart Card menu and by pressing the "Mute" button. Please note that Omnia Cards with detachable sim chips are not concerned.

PS : Please note that you have to make "Load Full Defaults" in the "key editor" menu to enable the keys.

 

[tani1]

New K.Y.N.G Version A2.39!!!

Fixed : (All Models) Conflict between French TNTSAT provider Emu and Canal+ channels.
Added : (All Models) Emu support for some additional channels on Astra 19°E, the channels are those that belong to these transponders: 11739 V and 11778 V.
Added : (All Models) As you may know, another Omnia file has been released, but it opens only AB Sat channels, so implemented on the receiver the necessary Algos to open as well C+/Csat channels. All you have to do is update your Omnia Card through the Smart Card menu and by pressing the "Mute" button. Please note that Omnia Cards with detachable sim chips are not concerned.
PS : Please note that you have to make "Load Full Defaults" in the "key editor" menu to enable the keys.

 

[baha2]

New K.Y.N.G Version A2.40

no info at this time

 

[Verdeoro]

New K.Y.N.G Version A2.41

 

[tani1]

New K.Y.N.G Version A2.41!!!

Fixed : (All Models) Viaccess providers ECM changes that caused problems with certain channels like NT1 on EMU, certain cards like Orange TV and others.

Added : (M2S Plus) The needed radegast modifications to allow the M2S plus model to be used as a client to a transformed Atlas-E (dongle).

 

[tani1]

New K.Y.N.G Version A2.42!!!

Added : (All Models) TNTSAT5 Viaccess cards support.
Added : (M2S Plus) The 4 Free Servers support. Due to lack of space, we were forced to use one of the existing servers to implement them. So to enable this feature on the M2S model, you'll have to go to "Network Settings" menu, enable client activity, then go to client settings using the blue button. Change servers' index to finally find the "Free Servers" there, where you can either disable or choose one of the 4 available free servers. Enjoy.

 

[raul7]

Atlas_DongleSoftware_D1_10

Atlas_DongleSoftware_D1_10

Added: (Atlas/Atlas-E/M3S2) More Data formats for security and stability reasons. Please note that you must update your receiver to ba able to see all servers. Right now, only people who use this version, will be able to receive the W3 fourth server.

 

[marokino08]

version A2.43.
Fixed : (All Models) Support for some Irdeto cards.

 

[kargo.25]

Fixed: (M2S Plus) The bug that causes the "free servers" when they are turned to the other servers ... Correction: (Atlas-E) Bug reported by Actarus regarding the CCCam Please note that the V2 is available in A2.43. Added: (All Models) the ability to update other maps omnia This version is also available in the file server ... KYNG !

 

[marokino08]

version A2.43.

Fixed : (All Models) Support for some Irdeto cards.
Fixed : (M2S Plus) Bug that caused other servers not to work when "Free Servers" are enabled.
Fixed : (Atlas-E) Bug reported by Actarus, which concerns CCcam. Please note that V2 of A2.43 is available.

 

[bozomustafa_68]

M3Sv6_94

 

[Ramzen]

version A2.44.

* Fixed : (All Models) Support for the new update of the Omnia card. The update itself is also included in this version.

 

[f2f2]

HY

info
the new iLLUSiON software develop. contineau
HUNGARY team

[email protected]

7EUR/1month
or
10USD/1month
or
2000HUF/month

1.you SEND mailmessage you write PIN code !
2.I send bank account
3.you SEND sponsormoney
4.I send fix (PIN code)mailadr.zip link
NEW iLLUSiON software
M3/C3 .... M2 ..... 2012 M5


F2 software team
netboard.hu forum
http://www.netboard.hu/viewtopic.php?topic=9868

 

[raul7]

Atlas_DongleSoftware_D1_11

Atlas_DongleSoftware_D1_11

Added: (Atlas/Atlas-E/M3S2) More Data formats for security and stability reasons. We also made some changes to the servers, removing some and adding some more. Please note that to be able to use this version you must update your bootloader first (A2.10). also note that only people using this version will be able to receive the data from servers. And we reccommend to all users to prefer W3 over AB1 because we have more solutions on W3.

 

[raul7]

Atlas MainSoftware A2.45 Seulement avec bootloader A2.10

Atlas MainSoftware A2.45 Seulement avec bootloader A2.10

 

[raul7]

Atlas_BootLoader_A2_10

A2.10.
Fixed (Atlas/Atlas-E/M3S2) Due to the attacks we are facing on our dongle, we are obliged to protect our software with a new bootloader. This new bootloader is only for Atlas model. Please note that none of the old software versions will be compatible with this bootloader and if you want to update your box, you'll have to first update the bootloader.
Added (Atlas/Atlas-E/M3S2) We have also added a new main software version A2.45 that is compatible with this bootloader.