I have just bought a G@MM@ card. NEED HELP!

D

demonknight9

Member
Messages
63
I have bought a G@MM@ card for 50 squid but need some help loading c+NL. Bulsat loads ok but not all channels do I need to leave bulsat on a specific channel to autoupdate? I can update the card with the cas3+ interface and when I load the bulsat file it works ok but when I load the C+NL it doesn't. I have left the receiver on sport1 on 19.2e for 4 hrs and nothing come up. My question is, do I need to leave the card in until the channel clears or do I reset the receiver on the 4hr mark? Sorry for the newbie question but this card is new to me. I have a diablo light 2.3 and like I said it works fine with bulsat, my problems are with canal digitaal. What cam settings should I use? should I leave n2 AU on or auto pmt or turned them off? The message from the card on c+nl is that iam not authorized to view the channels.

If anyone can shed some light on this matter I do appreciate :)
 
D

demonknight9

Member
Messages
63
Hi, I loaded c+nl but it doesn't clear the channels. All night long I left it.Do I need to wait until it clears? Bulsat it divides the packages in 3 packs. about 12 channels inc vh1, then another 12 packages inc mtv and 2 packages HBO and HBO comedy. To change between packages I need to tune the channel I want from that package and reset the receiver, then all the channels from the package are cleared. If I want to watch channels from another package I will have to reset the receiver again or the message that I have no rights to watch this program appears. Do you think the problem is with my receiver? I have a Comag SL100HD. Or is this how everyone does it? C+NL doesn't open at all. Just says i don't have rights to watch this program. I use a diablo cam light 2.3. Any light you can shed on this matter is appreciated.

Thanks in advance
bellof said:
which file you loaded on that card???
Click to expand...
 
Last edited:
empb

empb

SU Team: It's All Good (Fausto v1.45/Newcamd/vplug
Staff member
Administrator
Messages
10,299
Bulsatcom is only one package. For better viewing now the card is authorised, turn Auto PMT [OFF] (unfortunatly as you say some decoders can cause issues, some decoders require this on regardless of a correct CAIDs file being used). Then send a CAIDs file containing just the CAID required for Bulsat (0604) to the CAMs CAIDs folder and in CONFIGURATION select this CAID file instead of the default CAIDs file [CAIDS].

Some file guys include pre-made CAID files with there key.bin zips or you can make one with any .XML text editor, word etc. Also programs like Fausto and DiabloKeyEditor have built in CAID file creation tools.

If you can't find the tutorials on sending files to the correct place on the cam using the CAS Studios software....ask us
 
D

demonknight9

Member
Messages
63
I know where to send the caids to on the cam. I put there the ones you have with your diablo keys. The one I chose for bulsat is bulsanova or main but it still happens despite. I don't know how to create this xml file you said and have my personalized keys.bin file. I turned auto pmt off now but it still does it. Thanks mate
empb said:
Bulsatcom is only one package. For better viewing now the card is authorised, turn Auto PMT [OFF] (unfortunatly as you say some decoders can cause issues, some decoders require this on regardless of a correct CAIDs file being used). Then send a CAIDs file containing just the CAID required for Bulsat (0604) to the CAMs CAIDs folder and in CONFIGURATION select this CAID file instead of the default CAIDs file [CAIDS].

Some file guys include pre-made CAID files with there key.bin zips or you can make one with any .XML text editor, word etc. Also programs like Fausto and DiabloKeyEditor have built in CAID file creation tools.

If you can't find the tutorials on sending files to the correct place on the cam using the CAS Studios software....ask us
Click to expand...
 
D

demonknight9

Member
Messages
63
Last edited:
You must log in or register to reply here.
Top