frominternetstupid
Senior Member
- Messages
- 274
card is reading in oscam+cccam but get no updates. any solution known??
card is reading in oscam+cccam but get no updates. any solution known??
But if you want to use oscam as card reader then which part of this tutorial makes the card update guli ?
Which part of that config actually gets the updates lad?
hi wondering if anyone can help i hac oscam/cccam installed but can only get some channels to work but others wont with local card on 0963... atr will clear as will othes but sly sports uk wont any ideas
p.s i have copied above config but no luck
using a 9100s technomate card in bottom slot with ur image everything clears apart from sly sports and movies... most other channes clear ok aprt from ssp1 to 4 and ruk
pretty much tried to look everywere without asking for help
have cccam/oscam installed from blue panel input box id from main menu of original box set up
were do i open port 15500 ?
not sure were to put N: line (cccamcfg?)
and what should attributes of chmod be ?
thanks for reply
CCcam 2.13 will update your card ok
also 2.1.4 but what i make if sky send destroy emm to my card and cccam write this on the card??? then card is dead! oscam is enable to block these emm's...
Hi Guli,
Please can you help me mate? I just want to use OSCAM on it's own to read and update my two sly cards in my two readers. OSCAM is reading my cards fine but not keeping my entitlements updated. My files are attached - can you see what I'm doing wrong?
p.s. my boxid is blanked out for obvious reasons.
Oscam.server
[reader]
label = skyuk
protocol = internal
device = /dev/sci0
enable = 1
caid = 0963
ident = 0963:000000
boxid = xxxxxxxx
detect = cd
reconnecttimeout = 5
ecmcache = 1
emmcache = 1,3,2
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
group = 1
#lb_weight = 100
[reader]
label = skyuk
protocol = internal
device = /dev/sci1
boxid = xxxxxxxx
enable = 1
caid = 0963
ident = 0963:000000
detect = cd
reconnecttimeout = 5
ecmcache = 1
emmcache = 1,3,2
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
group = 2
#lb_weight = 101
Oscam.conf
[global]
logfile = stdout
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 2000
fallbacktimeout = 2500
clientmaxidle = 120
failbantime = 30
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -10
serialreadertimeout = 1500
maxlogsize = 50
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
#lb_mode = 0
#lb_save = 0
#lb_nbest_readers = 2
#lb_nfb_readers = 1
#lb_min_ecmcount = 5
#lb_max_ecmcount = 500
#lb_reopen_seconds = 900
resolvegethostbyname = 0
failbantime = 10
#double_check = 1
[global]
logfile = stdout
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 2000
fallbacktimeout = 2500
clientmaxidle = 120
failbantime = 30
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -10
serialreadertimeout = 1500
maxlogsize = 50
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
#lb_mode = 0
#lb_save = 0
#lb_nbest_readers = 2
#lb_nfb_readers = 1
#lb_min_ecmcount = 5
#lb_max_ecmcount = 500
#lb_reopen_seconds = 900
resolvegethostbyname = 0
failbantime = 10
#double_check = 1
[dvbapi]
enabled = 1
user = localuser
au = 1
boxtype = bm750
pmt_mode = 0
keepalive = 1
[monitor]
port = 988
monlevel = 4
nocrypt = 127.0.0.1
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.1.1-192.168.1.254
Oscam.user
#[account]
user = localuser
pwd =
monlevel = 1
uniq = 2
group = 1,2
au = skyuk
ident= 0963:000000
caid = 0963
services = sky
Many thanks
try this config with the changes in red