How to flash a new E2 Image to my Kathrein UFS 910?

[Nextnet]

I have tested the new Neutrino to my Kathrein UFS 910 for few days but starting to boring so I want to try another image..

My question looks simple but I don't think it is...How can I flash again my Kathrein UFS 910 with another image?

I'm trying to find the easiest way and of course the safer one...

So any ideas? Flashing to main flash memory (I hate Barry Allen...can't understand about it)from a working E2 Image to a new one...

Thanks in advance

 

[globopl]

Upgrade Enigma2 by USB

Preparation:
1.We only recommend Kingston USB stick, we don’t support USB hard disk
2.Please make sure your USB stick only have 1 partition and the file system is FAT32
3.Set default booting system to [enigma2].
Upgrade Step:
1.Make sure [C:/engima2] is exist, if not, please create this folder.
2.copy [uImage] and [e2jffs2.img] to [C:/engima2]
3.Connect USB stick to STB
4.Keep Pressing [OK] Button in Front Panel, then power on STB.
5.After 5 seconds, you will see [Forc] in LED, release [OK] button and press

Button.
6.if everything OK, You will see [U LD] shining in LED
7.if upgrade success, You will see [SUCC] and STB reboot automatically
If upgrade not finishes in 5 minutes, then there must be something wrong, please check your configuration and re-try.​

 

[Nextnet]

Questions part 2:

"3.Set default booting system to [enigma2]."...More details please...

"2. copy [uImage] and [e2jffs2.img] to....." (if I understood i create a folder "enigma2" to usb stick) so explain me what is the [uImage] that you have mentioned and what the [e2jffs2.img]

"4.Keep Pressing [OK] Button in Front Panel, then power on STB." the front panel has only four buttons V-FORMAT...MENU...OPTION...EXIT...and the multi button for radio -tv and volume....SO WHICH ONE YOU MEAN IS THE OK??

AND WHICH IS THE

button?

Thanks but I have spent a lot of my time to this receiver try to understand what I must do...I wish I could buy a more easier one...I'm still a satellite newbie...​

 

[bodyan]

Upgrade Enigma2 by USB

Preparation:
1.We only recommend Kingston USB stick, we don’t support USB hard disk
2.Please make sure your USB stick only have 1 partition and the file system is FAT32
3.Set default booting system to [enigma2].
Upgrade Step:
1.Make sure [C:/engima2] is exist, ..............................

This is instruction how update enigma2 on spark recievers, not kathrein ufs 910.

To flash Kathi 910 you need to use AAF Multipart Installer V2.1 and image for a flash. Mini U-boot 1.3 must be previously installed.

 

[superas]

Hello all. I have a Kathrein 910sw with original f/w 2.01. I want to install a recent E2 image because I want to use CCCam and much more. If I understood correctly, I have to install mini U-boot 1.3 first and then use AAF Multipart Installer V2.6 (which is the latest version) to flash the box with E2 image. Am I right?

First things first: How can I install mini U-boot 1.3 in my box? Do I have to use null modem and HyperTerminal? Will I need a USB stick? Please explain step-by-step. Thanks for your time.