HELP WITH BLANCK SCREEN

[Murphy]

My bbc london and 2 other channels have gone blanck. I have done several rescan and check the frequency and qpsk which is alright.
when i zap to these channels,I can hear the programme is on but the screen is just blanck with no picture.

Any help please

 

[Ferret]

Strange one mate

Try sending in some channel setting these will over write any error you have in your current ones.

Ferret

 

[Murphy]

Strange one mate

Try sending in some channel setting these will over write any error you have in your current ones.

Ferret

Thanks Farret,
If i sending new channel by using dreamedit, will this affect my motor set up?

 

[Ferret]

No mate it wont disturb your motor settings there locked in another file.

Ferret

 

[Murphy]

No mate it wont disturb your motor settings there locked in another file.

Ferret

Thanks, i will give it a go and let you know the out come

 

[Murphy]

Hi All
I sent a complete new channel list to the vu duo today but am still having this blank screen problem. I have also tried to rescan several time but no joy. any help will be appreciated.

Thanks

Murphy

 

[Ferret]

Well mate if you not seeing BBC etc and you have tried rescanning i would take a look at the signal reading you have this could be a dish alignment problem.

Ferret

 

[Murphy]

Well mate if you not seeing BBC etc and you have tried rescanning i would take a look at the signal reading you have this could be a dish alignment problem.

Ferret[/QUOTE


I only have three channels with this problem,setanta sport 1, Hitv and BB1, The audio for the three channels are working but no picture with blank screen, signal 98 percent,correct frequencies and QPSK. all other channels and satalite are working fine.
I can watch the three channels until i noticed last week.

 

[Murphy]

I've noticed via info that the audio and video PID is the same on all the affected three channels and that shouldn't be.
Anybody knows how i can change the audio and video PID? I have change image and do factry reset but stil d same.

 

[Ferret]

I've noticed via info that the audio and video PID is the same on all the affected three channels and that shouldn't be.
Anybody knows how i can change the audio and video PID? I have change image and do factry reset but stil d same.

Best way to edit the video and audio pids are with a channel editor like Dreamset

Have a look at this guide although for itvhd it will give you some idea.

http://www.sat-universe.com/showpost.php?p=565385&postcount=2

Ferret

 

[Murphy]

Best way to edit the video and audio pids are with a channel editor like Dreamset

Have a look at this guide although for itvhd it will give you some idea.

http://www.sat-universe.com/showpost.php?p=565385&postcount=2

Ferret

Thanks for ur post Ferret but where can find exact number for audio and video PID for eg setanta sport1?

 

[Murphy]

I have tried using dreamset but i have the following;

connecting to box
reading userBouquet
reading services
Tranfer file fail> lamedb
Tranfer completed with Error!!!

When i tested the configuration on dreamset i have this message;

checking/share/tuxbox/satalite.xml..... (warning)
checking/var/tuxbox/config/enigma/lamedb..... ( error)
I dont know what all this mean.

Please anything am not doing right here?
Thanks all

 

[Ferret]

Foolow this guide to setup up Dreamset but when chossing the enigma version choose enigma 2.4

http://www.sat-universe.com/showthread.php?t=132625

Ferret

 

[Murphy]

When i tested the configuration on dreamset i have this message;
1.ftp and ip (ok)
2.checking/share/tuxbox/satalite.xml..... (warning)
3.checking/var/tuxbox/config/enigma/lamedb..... ( error)

I have have also selected enigma 2 version 4.. but stil not working. there is no enigma 2.4 in the drop down box.
can i use dreamedith protocol because it working fine with no error. But i will also like to get to the buttom of this using dreamdet.. no knowledge is too small.
Thanks all

 

[Ferret]

Sometimes youll get the Lamdb error particulary if you have not scanned at all.

Trust me enigma 2.4 is there have a look at this pic. If its not then try a later version.

 

[Murphy]

Thanks all my channels are back again..thanks for your useful post.