Help Please Cuberevo 9000

[rustyj]

I keep getting MULTIBOOT 2 on the LCD screen after pressing 2 on the remote.
Any Ideas??

 

[Rocknroll]

I keep getting MULTIBOOT 2 on the LCD screen after pressing 2 on the remote.
Any Ideas??

That's what you should get. But you don't have image installed on usb stick so it stays there. If you did it would go on to booting enigma.
You should press 3 on your remote. It will boot to flash image.
After that you format usb stick and unpack enigma on it.
Then you can use multiboot 2 option.

 

[DKaftermath]

I keep getting MULTIBOOT 2 on the LCD screen after pressing 2 on the remote.
Any Ideas??

you could have downloaded a corrupt file, i have seen this happen loads of times.

unpacking to a USB stick should take about at least 10 minutes to do.

if it unpacks image in less than that time then it wont work.

download from another location if that is the case.

or try the latest PKT 7.5.1 here http://rapidshare.com/files/333162354/PKT_0.7.1_9000.tar.gz

 

[rustyj]

I am having problems copying the fiel to the usb stick and to the box - /ver dirrectory.
I have downloaded a few images but all of them are the same rebooted the box a few times and formatted the stick a few time to.

Any ideas

 

[Bro1]

http://www.sat-universe.com/showthread.php?t=136156

old image but you could try this for now just to have a look at e2

 

[badeyeah]

I am having problems copying the fiel to the usb stick and to the box - /ver dirrectory.
I have downloaded a few images but all of them are the same rebooted the box a few times and formatted the stick a few time to.

Any ideas

You just have to download 1 good E2 image for your ipbox9000HD.I hope you mean that you are having problems unpacking the file to the usb-stick.After you have uploaded it to mnt/usb/usb0.

The thing about the thread with the instructions is, after decompression you'll have to type "sync" (without quote).Otherwise it won't work.

Hope you did that.

 

[rustyj]

ok I have managed to copy the file to another mem stick and unpack it. but only saw your post about sync after I rebooted my box can I still do it??

 

[Bro1]

heres the only guide that seem to work for me ok


http://www.sat-universe.com/showpost.php?p=359293&postcount=9

 

[rustyj]

Bro1 thanks for the guide it works!!

But now what the hell do now I got in to the E2 menu did a scan got a few channels keep getting "Service unavalable Check tunner Configuration"

Any ideas

 

[rustyj]

what sat's should I be looking at??

 

[Bro1]

go into tuner configuration,choose simple then underneath choose positioner,input your longitude and latitude,upload this channell list http://www.sat-universe.com/showpost.php?p=519621&postcount=17

You can install any channellist made for the dreambox for your enigma2 image.
How to:

http://www.sat-universe.com/showpost.php?p=519621&postcount=17
and unzip those files.

use dreamset with these settings,upload list then reboot

http://www.sat-universe.com/showpost.php?p=482285&postcount=5

 

[rustyj]

Thanks I will de this when i get home is there any thing else I would need to do to the box??

 

[rustyj]

In the ftp config page it asks me to upload it to /ect/tuxbox/ but I don't have a dir like that on mine??

 

[Bro1]

did ti say that when you click test configuration,cant try at the mo ,aint got e2 on

 

[rustyj]

I found it I had to double click on the .. to browse to it.
I am asuming these file go on to the box and not the usb as in /mnt/usb/usb0??

 

[Bro1]

presume they would go to the usb stick seeing as enigma 2 is on there,after u done reboot box and all should be good

 

[rustyj]

Do the files normaly take a long time to up load?? it's taken about 50minutes and still nly done 12 files. I have rebooted twice?

 

[Bro1]

lol just do the lamedb file and the satellites.xml file :eyecrazy:

 

[rustyj]

lol ok what do I do with all the files I have just up loaded?

 

[rustyj]

Hi ya ok now I can see a load more can I do any more to see the reset??