Hi All, just got an AB IP 900hd a week ago, performance is excellent, especially HD,but I have a couple of issues to resolve I cannot update new image,I've read all post with similar problems but none of them work for me.Any suggestion on why I can't connect to a pc via ether usb gives error 10 or serial and USB memory stik. My Box Information is: Program Version 1.0.(R7473). DB Version R7327.Regards
- Home
- Forums
- HDTV And Ultra HDTV
- Other HDTV Receivers
- Cuberevo - Ipbox 9000
- Cuberevo - Ipbox 9000 Chat
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Help IPBOX900HD
- Thread starter swan2
- Start date
Hello M8. I has the same problem with mine after owning it for 3 months,I did try various 131,132 upgrades but no luck however a factory reset works well. All you have done is temporarily knackered the bootloader and a factory rest restores it.........Regards N.:thum:
er10 is a problem with the usb stick or incorrect file name. The file name has to be "usb_update.img". This thread discusses the memory stick:-
http://www.sat-universe.com/showthread.php?t=84356&highlight=er10
http://www.sat-universe.com/showthread.php?t=84356&highlight=er10
thanks frostie but honesly i've tried everythig that i can think of but i've only had this box about a week so i still don't no what i'm doing, i've read nearly every forum post about the ipbox 900hd on the internet. i've tried 5 usb sticks rangeing from 512mb upto 4gb but i still get er10 should i recieve any channels before i even update the image, cos i dont recieve any channels or a signal?
er10 is a problem with the usb stick or incorrect file name. The file name has to be "usb_update.img". This thread discusses the memory stick:-
http://www.sat-universe.com/showthread.php?t=84356&highlight=er10
My box wouldnt update via stick,usb cable or serial cable after displaying er 10 however a factory reset enabled me to update via usb again..........N.
Well, you've got an image running ( If you go Information - System Information it'll tell you which one ). Have you got a motorized or multi-lnb system? If you've set up the lnb parameters correctly and tried to scan a satellite and get nothing, then either your tuner is faulty or the lnb, cabling, or dish are not correct. Do you get signals if you connect another receiver?
Guys it near impossible to "break" a linux receiver.
If you get er10 message then try this.
get the image you want but when you rename it do not rename it usb_update.img
rename it usb_update
Then turn power off insert usb stick turn power back on at the same time make sure you have standby button pressed the message booting will come up then you will get the message USB UPGRADE now let go of standby and leave it until you get the message DONE on the lcd.
If you get er10 message then try this.
get the image you want but when you rename it do not rename it usb_update.img
rename it usb_update
Then turn power off insert usb stick turn power back on at the same time make sure you have standby button pressed the message booting will come up then you will get the message USB UPGRADE now let go of standby and leave it until you get the message DONE on the lcd.
Hi there did you try to boot from USB flash stick ?? did you change the name to usb_update.img
???
I got an err10 with the original name but changing the name solved that.
Sorry about this I left the reply for too long to post. apparently many ppl replied the same before me.
good luck with your problem
???
I got an err10 with the original name but changing the name solved that.
Sorry about this I left the reply for too long to post. apparently many ppl replied the same before me.
good luck with your problem
Last edited:
cmpw11,
That's what mine arrived with and should work alright. It sounds to me as if you have a fixed dish. Is it pointed at Astra2 at 28.2E or the old Sky satellite Astra1 at 19.2E? In the Service Searching - Satellite Configuration menu have you set up the lnb parameters for this satellite?
Have you then done a channel scan?
I found the manual wasn't too clear on this.
That's what mine arrived with and should work alright. It sounds to me as if you have a fixed dish. Is it pointed at Astra2 at 28.2E or the old Sky satellite Astra1 at 19.2E? In the Service Searching - Satellite Configuration menu have you set up the lnb parameters for this satellite?
Have you then done a channel scan?
I found the manual wasn't too clear on this.