Hacking CA system challenge *Tandberg [ NO Keys Allowed in Chat Section/s ]*

I

imran malik

Registered
Messages
4
ooOO_SORGOS_OOoo said:
I think your receiver support tandberg
1.Problem is keys = keys not valid/ active
2.your receiver emu doesnt support really tandberg!?
Click to expand...
Brother my receiver is running Fox network 42 East Tandberg channels,
Are these different from asiasat5 epl Tandberg feeds?
PLZ guys help me out to solve the problem.
Any tips about entering key would be highly appreciated. Thanks
 
M

marjanen

Registered
Messages
276
Hi!

I´m not sure what I´m doing wrong here but I cant get this to work.
Oscam´s Ok, because my Cline runs OK.
I´m not sure if it´s reading the softcam.key file at all...
I configured to oscam.server file:
[reader]
label = SoftCam.Key
protocol = constcw
device = /etc/tuxbox/config/oscam/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000

And I have put the softcam.key to that director with attributes 755

I have tested Fox sports Hd from 7 east which is in Biss but I cant get even that open.
With Oscam Ymod It runs smoothley...

I have Vu Ultimo With Openpli4 and oscam 11335-r0.0

in http://192.168.1.8:16402/:



Proxies 5/5 (3 of 5 online)
Hide Restart SoftCam.Key ON :: 0 constcw 0000:0000@000000 no data 00:22:11
00:05:16 UNKNOWN
Hide Restart constant.cw ON :: 0 constcw 0000:0000@000000 no data 00:22:11
00:05:16 CONNECTED
Hide Restart oscam.keys ON :: 0 constcw 0000:0000@000000 no data 00:22:11
00:05:16 CONNECTED
Hide Restart oscam.constant.cw ON :: 0 constcw 0000:0000@000000 no data 00:22:11
00:05:16 UNKNOWN
 
Last edited:
freon

freon

Registered
Messages
387
oscam.server

[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,1FFF,0E00,4AE1,1010
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 01101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:0 00000;1010:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000,00FFFF
group = 1,2,3,4,5,6,7,8,9
blockemm-g = 1
lb_weight = 100

[reader]
label = SoftCam.Key
protocol = constcw
device = /etc/tuxbox/config/oscam/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 01101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:0 00000;1010:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000,00FFFF
group = 1,2,3,4,5,6,7,8,9
lb_weight = 100

[reader]
label = constant.cw
protocol = constcw
device = /etc/tuxbox/config/oscam/constant.cw
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,1FFF,0E00,4AE1,1010
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 01101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:0 00000;1010:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000,00FFFF
group = 1,2,3,4,5,6,7,8,9
lb_weight = 100
 
M

marjanen

Registered
Messages
276
Still no show.
Got this in http://192.168.1.8:16402/:
SoftCam.Key ON :: 0 constcw 0000:0000@000000 no data 00:02:23
00:01:29 CONNECTED

I got softcam.key in right place and in the file:
F 00010100 00 xxxxxxxxxxxxxxxx ; FOX
F 00010100 00 xxxxxxxxxxxxxxxx ; FOx
 
freon

freon

Registered
Messages
387
For OpenPLI softcam.key, constant.cw must be placed in /etc/tuxbox/config/oscam folder. Ofcourse keys must be valid. Check in key files for duplicates. Remove keys from files of sattelites you do not see...
 
M

marjanen

Registered
Messages
276
freon said:
For OpenPLI softcam.key, constant.cw must be placed in /etc/tuxbox/config/oscam folder. Ofcourse keys must be valid. Check in key files for duplicates. Remove keys from files of sattelites you do not see...
Click to expand...

Hi!
I have tried both locations now.
\etc\tubox\config
\etc\tubox\config\oscam

In softcam.key I have only 2 lines:

F 00010100 00 AAxxxxxxxxxxxxDD
F 00010100 00 AAxxxxxxxxxxxxDD

I´m hundred per cent sure the key is valid because I copied it from oscam.key what my Oscam_ymod uses.

I dont know but my quess is that this oscam is not even trying to read the softcam.key file at all.
So there must be somthing wrong.

I just want to try to see the PL feed from 7east but theres no signal atm so I´m trying fox sports...
 
M

marjanen

Registered
Messages
276
budiarno said:
Can you show us your oscam log?
Click to expand...

Hope this helps:

1970/01/01 02:00:21 00000000 s (main) System name = Linux
1970/01/01 02:00:21 00000000 s (main) Host name = vuultimo
1970/01/01 02:00:21 00000000 s (main) Release = 3.9.6
1970/01/01 02:00:21 00000000 s (main) Version = #1 SMP Sat Aug 20 05:59:41 CEST 2016
1970/01/01 02:00:21 00000000 s (main) Machine = mips
1970/01/01 02:00:21 00000000 s (main) Stb model = dm8000
1970/01/01 02:00:21 00000000 s (main) Stb vumodel = vuultimo
1970/01/01 02:00:21 00000000 s (main) Stb boxtype = vuultimo
1970/01/01 02:00:21 00000000 s (main) The current system time is smaller than the build date (Jan 16 2017). Waiting up to 60 seconds for time to correct
2017/01/18 18:52:25 00000000 s (main) creating pidfile /tmp/oscam.pid with pid 471
2017/01/18 18:52:25 00000000 s (config) services reloaded: 0 services freed, 27 services loaded, rejected 0
2017/01/18 18:52:25 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2017/01/18 18:52:25 00000000 s (main) signal handling initialized
2017/01/18 18:52:25 00000000 s (config) 919 provid's loaded
2017/01/18 18:52:25 00000000 s (config) 98 service-id's loaded in 5 ms
2017/01/18 18:52:25 00000000 s (config) 3 tier-id's loaded
2017/01/18 18:52:25 00000000 s (config) 1 lengths for caid guessing loaded
2017/01/18 18:52:25 00000000 s (config) 5 entries read from oscam.whitelist
2017/01/18 18:52:25 00000000 s (reader) SoftCam.Key [constcw] creating thread for device /etc/tuxbox/config/oscam/SoftCam.Key
2017/01/18 18:52:25 00000000 s (reader) constant.cw [constcw] creating thread for device /etc/tuxbox/config/oscam/constant.cw
2017/01/18 18:52:25 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/01/18 18:52:25 00000000 s (main) waiting for local card init
2017/01/18 18:52:25 3A1ABA1E p (constcw) Local reader: constant.cw (file: /etc/tuxbox/config/oscam/constant.cw)
2017/01/18 18:52:25 3A1ABA1E p (constcw) ERROR: Can't open /etc/tuxbox/config/oscam/constant.cw (errno=2 No such file or directory)
2017/01/18 18:52:25 3A1ABA1E p (reader) constant.cw [constcw] proxy initialized, server /etc/tuxbox/config/oscam/constant.cw:0
2017/01/18 18:52:25 5E0CE589 p (constcw) Local reader: SoftCam.Key (file: /etc/tuxbox/config/oscam/SoftCam.Key)
2017/01/18 18:52:25 5E0CE589 p (reader) SoftCam.Key [constcw] proxy initialized, server /etc/tuxbox/config/oscam/SoftCam.Key:0
2017/01/18 18:52:25 7319D998 h (webif) webif: decompressed 178685 bytes back into 433096 bytes
2017/01/18 18:52:25 7319D998 h (webif) HTTP Server running. ip=:: port=16402
2017/01/18 18:52:25 00000000 s (main) init for all local cards done
2017/01/18 18:52:25 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2017/01/18 18:52:25 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2017/01/18 18:52:25 00000000 s (anticasc) anti cascading disabled
2017/01/18 18:52:25 7F95A299 c (client) plain dvbapi-client granted (linuxsatsupport, au=off)
2017/01/18 18:52:27 7F95A299 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache
2017/01/18 18:52:27 7F95A299 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2017/01/18 18:52:45 7F95A299 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000
2017/01/18 18:52:45 7F95A299 c (dvbapi) Demuxer 0 found 1 ECMpids and 6 STREAMpids in caPMT
2017/01/18 18:52:45 7F95A299 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2017/01/18 18:52:45 7F95A299 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 0800 VPID 0100
2017/01/18 18:52:45 5E0CE589 p (constcw) Searching CW for CAID 2600 PROVID 000000 SRVID 0001 ECMPID 1FFF PMTPID 0800 VPID 0100
2017/01/18 18:52:45 3A1ABA1E p (constcw) ERROR: Can't open /etc/tuxbox/config/oscam/constant.cw (errno=2 No such file or directory)
2017/01/18 18:52:45 7F95A299 c (ecm) linuxsatsupport (2600@000000/0000/0001/11:0DD2877997DAEF636F19E85E20C62E55): rejected reader sid (53 ms) by constant.cw (F/2/2/2) - MNC_international
2017/01/18 18:52:45 7F95A299 c (dvbapi) Demuxer 0 found 1 ECMpids and 6 STREAMpids in PMT
2017/01/18 18:52:45 7F95A299 c (dvbapi) Demuxer 0 restarting decodingrequests after 14 ms with 1 enabled and 0 disabled ecmpids!
2017/01/18 18:52:45 7F95A299 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2017/01/18 18:52:46 7F95A299 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 0800 VPID 0100

After that repeats the following:
2017/01/18 18:52:46 7F95A299 c (ecm) linuxsatsupport (2600@000000/0000/0001/11:0DD2877997DAEF636F19E85E20C62E55): rejected reader sid (35 ms) by SoftCam.Key (F/2/2/2) - MNC_international
2017/01/18 18:52:46 7F95A299 c (dvbapi) Demuxer 0 restarting decodingrequests after 6 ms with 1 enabled and 0 disabled ecmpids!
2017/01/18 18:52:46 7F95A299 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2017/01/18 18:52:47 7F95A299 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 0800 VPID 0100
 
freon

freon

Registered
Messages
387
Fox Sports Eutelsat 7B (Europe A Beam)
7°E 12558 V 4035 5/6 Mpeg4 HD
Softcam.key
F 00010100 00 AABB127734CCDDDD
F 00010100 01 AABB127734CCDDDD
F 00010100 00 1A8AA34D85C66BA76E
F 00010100 01 1A8AA34D85C66BA76E

constant.cw
2600:000000:0001:0000:0000::AA BB 12 77 34 CC DD DD AA BB 12 77 34 CC DD DD ;Fox sport 7E
2600:000000:0001:0000:0000::1A 8A A3 4D 85 C6 6B A7 6E 1A 8A A3 4D 85 C6 6B A7 6E ;Fox sport 7E

Try this.
 
M

marjanen

Registered
Messages
276
Till nothing.

Like I said. I think the problem is something else.
I already have those keys here...
Oscam Ymod Ok
But this other Oscam which I installed for tanberg givesme nothing.
 
M

marjanen

Registered
Messages
276
Till nothing.

Like I said. I think the problem is something else.
I already have those keys here...
Oscam Ymod Ok
But this other Oscam which I installed for tanberg givesme nothing.
 
You must log in or register to reply here.
Top