Guide: Converting Dbox2 Neutrino Services to Dreambox Enigma Services

Status
Not open for further replies.

hosein_satsat

Member
Messages
54
How Do I Convert my Dbox2 Neutrino Services to Dreambox Enigma?

If you've made the transition from Dbox2 to Dreambox...Welcome!
Hopefully you've still got a backup copy of your Dbox2 services.xml and bouquets.xml files.

Required

Bouquetter Program
Dbox2 services.xml and bouquets.xml

Instructions

Install Bouquetter on your PC. It's in German but has the same installer as most applications.
Once installed, load it from the Start Menu. Ooops, doesn't work ! You will have to go to C:\Program Files\Bouquetter\Bouquetter.exe to get the working program. Change the shortcut in the Start Menu if you want but you'll have to go to C:\Documents and Settings\All Users\Start Menu\Programs\Bouquetter instead of your currenty username.

Create a new folder on your desktop and copy your dbox2 services.xml and bouquets.xml files to there.

* Load Bouquetter.exe
* Select Load Services
* Under the Load From File menu, select Neutrino

* Select the services.xml file from the folder on your desktop
* Select YES to the next box that comes up

If you expand Kabel: Kabelanschluss you should see your transponders and the channels in each.
If you expand User-Bouquets TV on the right you should see your bouquets.

* Select Save Services
* Under the Save To File menu, select Enigma

* Select Enigma (services) from the filetype pulldown list
* Call the file services (without an extention) and Save
* Close down Bouquetter

In your services folder on your desktop, you should now have a services and a bouquets file, without an extention, and lots of userbouquet files.

Using your FTP client, ftp the services and bouquets files to /var/tuxbox/config/enigma on your box.
Using your FTP client, ftp the userbouquet files to /var/tuxbox/config/enigma/cable on your box.

If you have an image with a Reload Channels option, do this now. If you don't, you will have to to do the following...

Open web browser and paste the following command into the address bar:

http://192.168.xxx.xxx/cgi-bin/reloadSettings
(replace x with your own ip address)

Open web browser and paste the following command into the address bar:

http://192.168.xxx.xxx/cgi-bin/reloadUserBouquets
(replace x with your own ip address)

You should get a screen saying OK after both these commands.

Press OK on your dreambox then BLUE to bring up your bouquets.
Hopefully they should all be there.

Good Luck!


thank Devilfis
 
Last edited:
Status
Not open for further replies.
Top